Discrete structure of ultrathin dielectric films and their surface optical properties

The boundary problem of linear classical optics about the interaction of electromagnetic radiation with a thin dielectric film has been solved under explicit consideration of its discrete structure. The main attention has been paid to the investigation of the near-zone optical response of dielectrics. The laws of reflection and refraction for discrete structures in the case of a regular atomic distribution are studied and the structure of evanescent harmonics induced by an external plane wave near the surface is investigated in details. It is shown by means of analytical and numerical calculations that due to the existence of the evanescent harmonics the laws of reflection and refraction at the distances from the surface less than two interatomic distances are principally different from the Fresnel laws. From the practical point of view the results of this work might be useful for the near-field optical microscopy of ultrahigh resolution.Comment: 25 pages, 16 figures, LaTeX2.09, to be published in Phys.Rev.

Validity of the scaling functional approach for polymer interfaces as a variational theory

We discuss the soundness of the scaling functional (SF) approach proposed by Aubouy Guiselin and Raphael (Macromolecules 29, 7261 (1996)) to describe polymeric interfaces. In particular, we demonstrate that this approach is a variational theory. We emphasis the role of SF theory as an important link between ground-state theories suitable to describe adsorbed layers, and "classical" theories for polymer brushes.Comment: 8 pages, 1 figure, to be published in Phys. Rev.

Toll-like receptor and IL-12 signaling control susceptibility to contact hypersensitivity.

Allergic contact hypersensitivity (CHS) is a T cell-mediated inflammatory skin disease. Interleukin (IL)-12 is considered to be important in the generation of the allergen-specific T cell response. Loss of IL-12 function in IL-12Rbeta2-deficient mice, however, did not ameliorate the allergic immune response, suggesting alternate IL-12-independent pathways in the induction of CHS. Because exposure to contact allergens always takes place in the presence of microbial skin flora, we investigated the potential role of Toll-like receptors (TLRs) in the induction of CHS. Using mice deficient in TLR4, the receptor for bacterial lipopolysaccharide (LPS), IL-12 receptor (R) beta2, or both, we show that the concomitant absence of TLR4 and IL-12Rbeta2, but not the absence of TLR4 or IL-12Rbeta2 alone, prevented DC-mediated sensitization, generation of effector T cells, and the subsequent CHS response to 2,4,6-trinitro-1-chlorobenzene (TNCB), oxazolone, and fluorescein isothiocyanate. Introduction of the TLR4 transgene into the TLR4/IL-12Rbeta2 mutant restored the CHS inducibility, showing a requirement for TLR4 in IL-12-independent CHS induction. Furthermore, the concomitant absence of TLR2 and TLR4 prevented the induction of CHS to TNCB in IL-12-competent mice. Finally, CHS was inducible in germ-free wild-type and IL-12Rbeta2-deficient mice, but not in germ-free TLR4/IL-12Rbeta2 double deficient mice, suggesting that the necessary TLR activation may proceed via endogenous ligands

Degradation versus self-assembly of block copolymer micelles

The stability of micelles self-assembled from block copolymers can be altered by the degradation of the blocks. Slow degradation shifts the equilibrium size distribution of block copolymer micelles and change their properties. Quasi-equilibrium scaling theory shows that the degradation of hydrophobic blocks in the core of micelles destabilize the micelles reducing their size, while the degradation of hydrophilic blocks forming coronas of micelles favors larger micelles and may, at certain conditions, induce the formation of micelles from individual chains.Comment: Published in Langmuir http://pubs.acs.org/doi/pdf/10.1021/la204625

Non-Equilibrium in Adsorbed Polymer Layers

High molecular weight polymer solutions have a powerful tendency to deposit adsorbed layers when exposed to even mildly attractive surfaces. The equilibrium properties of these dense interfacial layers have been extensively studied theoretically. A large body of experimental evidence, however, indicates that non-equilibrium effects are dominant whenever monomer-surface sticking energies are somewhat larger than kT, a common case. Polymer relaxation kinetics within the layer are then severely retarded, leading to non-equilibrium layers whose structure and dynamics depend on adsorption kinetics and layer ageing. Here we review experimental and theoretical work exploring these non-equilibrium effects, with emphasis on recent developments. The discussion addresses the structure and dynamics in non-equilibrium polymer layers adsorbed from dilute polymer solutions and from polymer melts and more concentrated solutions. Two distinct classes of behaviour arise, depending on whether physisorption or chemisorption is involved. A given adsorbed chain belonging to the layer has a certain fraction of its monomers bound to the surface, f, and the remainder belonging to loops making bulk excursions. A natural classification scheme for layers adsorbed from solution is the distribution of single chain f values, P(f), which may hold the key to quantifying the degree of irreversibility in adsorbed polymer layers. Here we calculate P(f) for equilibrium layers; we find its form is very different to the theoretical P(f) for non-equilibrium layers which are predicted to have infinitely many statistical classes of chain. Experimental measurements of P(f) are compared to these theoretical predictions.Comment: 29 pages, Submitted to J. Phys.: Condens. Matte

Robust Phase Behavior of Model Transient networks

In order to study the viscoelastic properties of certain complex fluids which are described in terms of a multiconnected transient network we have developed a convenient model system composed of microemulsion droplets linked by telechelic polymers. The phase behavior of such systems has two characteristic features: a large monophasic region which consists of two sub-regions (a fluid sol phase and a viscoelastic gel phase) separated by a percolation line and a two phase region at low volume fraction with separation into a dilute sol phase and a concentrated gel phase. From the plausible origin of these features we expect them to be very similar in different systems. We describe here the phase behavior of four different systems we prepared in order to vary the time scale of the dynamical response of the transient network; they consist of the combination of two oil(decane) in water microemulsions differing by the stabilizing surfactant monolayer (Cetyl pyridinium chloride/octanol or TX100/TX35) and of two telechelic polymers which are end-grafted poly (ethylene oxide) chains, differing by the end-grafted hydrophobic aliphatic chains (C12H25 or C18H37).Comment: April 9 200

Scale-free static and dynamical correlations in melts of monodisperse and Flory-distributed homopolymers: A review of recent bond-fluctuation model studies

It has been assumed until very recently that all long-range correlations are screened in three-dimensional melts of linear homopolymers on distances beyond the correlation length $\xi$ characterizing the decay of the density fluctuations. Summarizing simulation results obtained by means of a variant of the bond-fluctuation model with finite monomer excluded volume interactions and topology violating local and global Monte Carlo moves, we show that due to an interplay of the chain connectivity and the incompressibility constraint, both static and dynamical correlations arise on distances $r \gg \xi$. These correlations are scale-free and, surprisingly, do not depend explicitly on the compressibility of the solution. Both monodisperse and (essentially) Flory-distributed equilibrium polymers are considered.Comment: 60 pages, 49 figure

Machine Learning for Health: Algorithm Auditing & Quality Control

Developers proposing new machine learning for health (ML4H) tools often pledge to match or even surpass the performance of existing tools, yet the reality is usually more complicated. Reliable deployment of ML4H to the real world is challenging as examples from diabetic retinopathy or Covid-19 screening show. We envision an integrated framework of algorithm auditing and quality control that provides a path towards the effective and reliable application of ML systems in healthcare. In this editorial, we give a summary of ongoing work towards that vision and announce a call for participation to the special issue Machine Learning for Health: Algorithm Auditing & Quality Control in this journal to advance the practice of ML4H auditing

Conductive Cellulose Composites with Low Percolation Threshold for 3D Printed Electronics

We are reporting a 3D printable composite paste having strong thixotropic rheology. The composite has been designed and investigated with highly conductive silver nanowires. The optimized electrical percolation threshold from both simulation and experiment is shown from 0.7 vol. % of silver nanowires which is significantly lower than other composites using conductive nano-materials. Reliable conductivity of 1.19 × 102 S/cm has been achieved from the demonstrated 3D printable composite with 1.9 vol. % loading of silver nanowires. Utilizing the high conductivity of the printable composites, 3D printing of designed battery electrode pastes is demonstrated. Rheology study shows superior printability of the electrode pastes aided by the cellulose\u27s strong thixotropic rheology. The designed anode, electrolyte, and cathode pastes are sequentially printed to form a three-layered lithium battery for the demonstration of a charging profile. This study opens opportunities of 3D printable conductive materials to create printed electronics with the next generation additive manufacturing process

The venom composition of the parasitic wasp Chelonus inanitus resolved by combined expressed sequence tags analysis and proteomic approach

<p>Abstract</p> <p>Background</p> <p>Parasitic wasps constitute one of the largest group of venomous animals. Although some physiological effects of their venoms are well documented, relatively little is known at the molecular level on the protein composition of these secretions. To identify the majority of the venom proteins of the endoparasitoid wasp <it>Chelonus inanitus </it>(Hymenoptera: Braconidae), we have randomly sequenced 2111 expressed sequence tags (ESTs) from a cDNA library of venom gland. In parallel, proteins from pure venom were separated by gel electrophoresis and individually submitted to a nano-LC-MS/MS analysis allowing comparison of peptides and ESTs sequences.</p> <p>Results</p> <p>About 60% of sequenced ESTs encoded proteins whose presence in venom was attested by mass spectrometry. Most of the remaining ESTs corresponded to gene products likely involved in the transcriptional and translational machinery of venom gland cells. In addition, a small number of transcripts were found to encode proteins that share sequence similarity with well-known venom constituents of social hymenopteran species, such as hyaluronidase-like proteins and an Allergen-5 protein.</p> <p>An overall number of 29 venom proteins could be identified through the combination of ESTs sequencing and proteomic analyses. The most highly redundant set of ESTs encoded a protein that shared sequence similarity with a venom protein of unknown function potentially specific of the <it>Chelonus </it>lineage. Venom components specific to <it>C. inanitus </it>included a C-type lectin domain containing protein, a chemosensory protein-like protein, a protein related to yellow-e3 and ten new proteins which shared no significant sequence similarity with known sequences. In addition, several venom proteins potentially able to interact with chitin were also identified including a chitinase, an imaginal disc growth factor-like protein and two putative mucin-like peritrophins.</p> <p>Conclusions</p> <p>The use of the combined approaches has allowed to discriminate between cellular and truly venom proteins. The venom of <it>C. inanitus </it>appears as a mixture of conserved venom components and of potentially lineage-specific proteins. These new molecular data enrich our knowledge on parasitoid venoms and more generally, might contribute to a better understanding of the evolution and functional diversity of venom proteins within Hymenoptera.</p