Inventory of the chemicals and the exposure of the workers’ skin to these at two leather factories in Indonesia

PURPOSE: Tannery workers are exposed to hazardous chemicals. Tannery work is outsourced to newly industrialized countries (NICs) where attention into occupational health hazards is limited. In this study, we investigated the skin exposure to hazardous chemicals in tannery workers and determined the prevalence of occupational skin diseases (OSDs) at tanneries in a NIC. METHODS: A cross-sectional study on the observation of the working process and an inventory and risk assessment of the chemicals used. Classification of chemicals as potential sensitizers/irritants and a qualitative assessment of exposure to these chemicals. Workers were examined and interviewed using Nordic Occupational Skin Questionnaire-2002/LONG. RESULTS: The risk of OSDs at the investigated tanneries was mainly related to the exposure of the workers' skin to chemicals in hot and humid environmental conditions. In 472 workers, 12% reported a current OSD and 9% reported a history of OSD. In 10% of all cases, an OSD was confirmed by a dermatologist and 7.4% had an occupational contact dermatitis (OCD). We observed that personal protective equipment (PPE) used was mainly because of skin problems in the past and not as a primary protection against OSD. CONCLUSION: We observed a high frequency and prolonged exposure to many skin hazardous factors in tannery work although PPE was relatively easily available and which was generally used as a secondary preventative measure. The observed point-prevalence in this study was at the same level as that reported for other high-risk OSDs in Western countries and other tanneries in NICs. However, the observed point-prevalence in this study was lower than that reported in India and Korea. The results of our study and those of other studies at tanneries from other NICs were probably influenced by Healthy Worker Survivor Effect (HWSE)

Development and validation of an HPLC–MS/MS method for the determination of arginine-vasopressin receptor blocker conivaptan in human plasma and rat liver microsomes: application to a metabolic stability study

Abstract Purpose To develop and validate a bio-analytical HPLC–MS/MS method for the determination of conivaptan (CVA) an arginine-vasopressin receptor blocker in human plasma and in rat liver microsomes (RLMs). Methods Analytes were separated on a reversed phase C18 column (50 mm × 2.1 mm, 1.8 μm). The mobile phase was a mixture of acetonitrile and 10 mM ammonium formate (40:60 v/v, pH 4.0) and was pumped isocratically for 4 min at a flow rate of 0.2 ml/min. Multiple reaction monitoring in positive ionization mode was used for the assay. Results The method yielded a linear calibration plot (r 2 = 0.9977 and 0.9998) over 5–500 ng/ml with a limit of detection at 1.52 and 0.88 ng/ml for human plasma and RLMs, respectively. The reproducibility of detection of CVA in human plasma and RLMs was found to be in an acceptable range. Conclusion The method developed in this study is applicable for accurately quantifying CVA in human plasma and rat liver microsomal samples. The optimized procedure was applied to study of metabolic stability of CVA. Conivaptan concentration rapidly decreased in the first 2 min of RLMs incubation and the conversion reached a plateau for the remainder of the incubation period. The in vitro half-life (t1/2) was estimated at 11.51 min and the intrinsic clearance (CLin) was 13.8 ± 0.48 ml/min/kg

An LC–MS/MS Analytical Method for Quantifying Tepotinib in Human Liver Microsomes: Application to In Vitro and In Silico Metabolic Stability Estimation

Tepotinib (MSC2156119) is a potent mesenchymal–epithelial transition (MET) factor inhibitor, a receptor tyrosine kinase that plays a crucial role in promoting cancer cell malignant progression. Adverse effects of tepotinib (TEP), such as peripheral edema, interstitial lung disease, nausea and diarrhea, occur due to drug accumulation and lead to termination of therapy. Therefore, the in silico and experimental metabolic susceptibility of TEP was investigated. In the current work, an LC-MS/MS analytical method was developed for TEP estimation with metabolic stability assessment. TEP and lapatinib (LTP) used as internal standards (ISs) were separated on a reversed-phase C18 column using the isocratic mobile phase. Protein precipitation steps were used to extract TEP from the human liver microsome (HLM) matrix. An electrospray ionization multi-reaction monitoring (MRM) acquisition was conducted at m/z 493→112 for TEP, at m/z 581→350, and 581→365 for the IS. Calibration was in the range of 5 to 500 ng/mL (R2 = 0.999). The limit of detection (LOD) was 0.4759 ng/mL, whereas the limit of quantification (LOQ) was 1.4421 ng/mL. The reproducibility of the developed analytical method (inter- and intra-day precision and accuracy) was within 4.39%. The metabolic stability of TEP in HLM was successfully assessed using the LC-MS/MS method. The metabolic stability assessment of TEP showed intermediate Clint (35.79 mL/min/kg) and a moderate in vitro t1/2 (22.65 min), proposing the good bioavailability and moderate extraction ratio of TEP. The in silico results revealed that the N-methyl piperidine group is the main reason of TEP metabolic lability. The in silico Star Drop software program could be used in an effective protocol to confirm and propose the practical in vitro metabolic experiments to spare resources and time, especially during the first stages for designing new drugs. The established analytical method is considered the first LC-MS/MS method for TEP estimation in the HLM matrix with its application to metabolic stability assessment

Ionophore-Based Polymeric Sensors for Potentiometric Assay of the Anticancer Drug Gemcitabine in Pharmaceutical Formulation: A Comparative Study

Gemcitabine is a chemotherapeutic agent used to treat various malignancies, including breast and bladder cancer. In the current study, three innovative selective gemcitabine hydrochloride sensors are developed using 4-tert-butylcalix-[8]-arene (sensor 1), β-cyclodextrin (sensor 2), and γ-cyclodextrin (sensor 3) as ionophores. The three sensors were prepared by incorporating the ionophores with o-nitrophenyl octyl ether as plasticizer and potassium tetrakis(4-chlorophenyl) borate as ionic additive into a polyvinyl chloride polymer matrix. These sensors are considered environmentally friendly systems in the analytical research. The linear responses of gemcitabine hydrochloride were in the concentration range of 6.0 × 10−6 to 1.0 × 10−2 mol L−1 and 9.0 × 10−6 to 1.0 × 10−2 mol L−1 and 8.0 × 10−6 to 1.0 × 10−2 mol L−1 for sensors 1, 2, and 3, respectively. Over the pH range of 6–9, fast-Nernst slopes of 52 ± 0.6, 56 ± 0.3, and 55 ± 0.8 mV/decade were found in the same order with correlation regressions of 0.998, 0.999, and 0.998, respectively. The lower limits of detection for the prepared sensors were 2.5 × 10−6, 2.2 × 10−6, and 2.7 × 10−6 mol L−1. The sensors showed high selectivity and sensitivity for gemcitabine. Validation of the sensors was carried out in accordance with the requirements established by the IUPAC, while being inexpensive and easy to use in drug formulation. A statistical analysis of the methods in comparison with the official method showed that there was no significant difference in accuracy or precision between them. It was shown that the new sensors could selectively and accurately find gemcitabine hydrochloride in bulk powder, pharmaceutical formulations, and quality control tests. The ionophore-based sensor shows several advantages over conventional PVC membrane sensor sensors regrading the lower limit of detection, and higher selectivity towards the target ion

Supramolecular Structure, Hirshfeld Surface Analysis, Morphological Study and DFT Calculations of the Triphenyltetrazolium Cobalt Thiocyanate Complex

Polymorphism is a prevalent occurrence in pharmaceutical solids and demands thorough investigation during product development. This paper delves into the crystal growth and structure of a newly synthesized polymorph (TPT)2[CoII(NCS)4], (1), where TPT is triphenyl tetrazolium. The study combines experimental and theoretical approaches to elucidate the 3D framework of the crystal structure, characterized by hydrogen-bonded interactions between (TPT)+ cations and [Co(NCS)4]2− anions. Hirshfeld surface analysis, along with associated two-dimensional fingerprints, is employed to comprehensively investigate and quantify intermolecular interactions within the structure. The enrichment ratio is calculated for non-covalent contacts, providing insight into their propensity to influence crystal packing interactions. Void analysis is conducted to predict the mechanical behavior of the compound. Utilizing Bravais-Friedel, Donnay-Harker (BFDH), and growth morphology (GM) techniques, the external morphology of (TPT)2[CoII(NCS)4] is predicted. Experimental observations align well with BFDH predictions, with slight deviations from the GM model. Quantum computational calculations of the synthesized compounds is performed in the ground state using the DFT/UB3LYP level of theory. These calculations assess the molecule’s stability and chemical reactivity, including the computation of the HOMO-LUMO energy difference and other chemical descriptors. The study provides a comprehensive exploration of the newly synthesized polymorph, shedding light on its crystal structure, intermolecular interactions, mechanical behavior, and external morphology, supported by both experimental and computational analyses