53,441 research outputs found
Implicit Large-Eddy Simulations of Hot and Cold Supersonic Jets in Loci-CHEM
This paper introduces a 4th-order accurate low-dissipation flux scheme for use on un- structured CFD codes, and compares this flux scheme with two others for LES calculations of hot and cold supersonic jets. The flux schemes are compared with experimental profiles of jet centerline Mach number, total temperature and total pressure, with jet spreading rate data, and with near- field acoustic measurements. The influence of grid resolution on these solution accuracy is also evaluated. The new low-dissipation flux scheme is shown to be stable on a high-speed compressible turbulent ow problem, and to be significantly more accurate than the existing baseline flux approach
Observations of ozone production in a dissipating tropical convective cell during TC4
From 13 July–9 August 2007, 25 ozonesondes were launched from Las Tablas, Panama as part of the Tropical Composition, Cloud, and Climate Coupling (TC4) mission. On 5 August, a strong convective cell formed in the Gulf of Panama. World Wide Lightning Location Network (WWLLN) data indicated 563 flashes (09:00–17:00 UTC) in the Gulf. NO2 data from the Ozone Monitoring Instrument (OMI) show enhancements, suggesting lightning production of NOx. At 15:05 UTC, an ozonesonde ascended into the southern edge of the now dissipating convective cell as it moved west across the Azuero Peninsula. The balloon oscillated from 2.5–5.1 km five times (15:12–17:00 UTC), providing a unique examination of ozone (O3) photochemistry on the edge of a convective cell. Ozone increased at a rate of 1.6–4.6 ppbv/hr between the first and last ascent, resulting cell wide in an increase of (2.1–2.5)×106 moles of O3. This estimate agrees to within a factor of two of our estimates of photochemical lightning O3 production from the WWLLN flashes, from the radar-inferred lightning flash data, and from the OMI NO2 data (1.2, 1.0, and 1.7×106 moles, respectively), though all estimates have large uncertainties. Examination of DC-8 in situ and lidar O3 data gathered around the Gulf that day suggests 70–97% of the O3 change occurred in 2.5–5.1 km layer. A photochemical box model initialized with nearby TC4 aircraft trace gas data suggests these O3 production rates are possible with our present understanding of photochemistry
Strong coupling of magnons in a YIG sphere to photons in a planar superconducting resonator in the quantum limit
We report measurements of a superconducting coplanar waveguide resonator
(CPWR) coupled to a sphere of yttrium-iron garnet. The non-uniform CPWR field
allows us to excite various magnon modes in the sphere. Mode frequencies and
relative coupling strengths are consistent with theory. Strong coupling is
observed to several modes even with, on average, less than one excitation
present in the CPWR. The time response to square pulses shows oscillations at
the mode splitting frequency. These results indicate the feasibility of
combining magnonic and planar superconducting quantum devices.Comment: 5 pages, 4 figure
Effect of type of otolith and preparation technique on age estimation of larval and juvenile spot (Leiostomus xanthurus)
Otoliths of larval and juvenile fish provide a record of age, size, growth, and development (Campana and Neilson,
1985; Thorrold and Hare, 2002). However, determining the time of first increment formation in otoliths (Campana, 2001) and assessing the accuracy (deviation from real age)
and precision (repeatability of increment counts from the same otolith) of increment counts are prerequisites for using otoliths to study the life history of fish (Campana and Moksness, 1991). For most fish species, first increment deposition occurs either at hatching, a day after hatching, or after first feeding and yolksac absorption (Jones, 1986; Thorrold and Hare, 2002). Increment deposition before
hatching also occurs (Barkmann and Beck, 1976; Radtke and Dean, 1982). If first increment deposition does not occur at hatching, the standard procedure is to add a predetermined number to increment counts to estimate fish age (Campana and Neilson, 1985)
Learning-related changes in brain activity following errors and performance feedback in schizophrenia
Thermionic performance of a variable-gap cesium diminiode with a 110-single-crystal-tungsten emitter and a polycrystalline-niobium collector
Results from tests of the first variable-gap diminiode at an initial interelectrode spacing of 0.23 millimeter indicate sharply defined, relatively low ultimate power points. This characteristic supports the value of the diminiode as a well-controlled tool for thermionic-conversion research and development
IRS 16SW - A New Comoving Group of Young Stars in the Central Parsec of the Milky Way
One of the most perplexing problems associated with the supermassive black
hole at the center of our Galaxy is the origin of the young stars in its close
vicinity. Using proper motion measurements and stellar number density counts
based on 9 years of diffraction-limited K(2.2 micron)-band speckle imaging at
the W. M. Keck 10-meter telescopes, we have identified a new comoving group of
stars, which we call the IRS 16SW comoving group, located 1.9" (0.08 pc, in
projection) from the central black hole. Four of the five members of this
comoving group have been spectroscopically identified as massive young stars,
specifically He I emission-line stars and OBN stars. This is the second young
comoving group within the central parsec of the Milky Way to be recognized and
is the closest, by a factor of 2, in projection to the central black hole.
These comoving groups may be the surviving cores of massive infalling star
clusters that are undergoing disruption in the strong tidal field of the
central supermassive black hole.Comment: 10 pages, 1 figure, accepted for ApJL, uses emulateap
Investigation of conventional and Super-X divertor configurations of MAST Upgrade using SOLPS
One of the first studies of MAST Upgrade divertor configurations with
SOLPS5.0 are presented. We focus on understanding main prospects associated
with the novel geometry of the Super-X divertor (SXD). This includes a
discussion of the effect of magnetic flux expansion and volumetric power losses
on the reduction of target power loads, the effect of divertor geometry on the
divertor closure and distribution of neutral species and radiation in the
divertor, the role of the connection length in broadening the target wetted
area. A comparison in conditions typical for MAST inter-ELM H-mode plasmas
confirms improved performance of the Super-X topology resulting in
significantly better divertor closure with respect to neutrals (the atomic flux
from the target increased by a factor of 6, but the atomic flux from the
divertor to the upper SOL reduced by a factor of 2), increased radiation volume
and increased total power loss (a factor of 2) and a reduction of target power
loads through both magnetic flux expansion and larger volumetric power loss in
the divertor (a factor of 5-10 in attached plasmas). The reduction of the
target power load by SXD further increases with collisionality (high density or
detached regimes) thanks to larger importance of volumetric power losses. It is
found that a cold divertor plasma leads to stronger parallel temperature
gradients in the SOL which drive more parallel heat flux, meaning that the
effectiveness of perpendicular transport in spreading the power at the target
can be reduced, and this needs to be taken into account in any optimisation.Comment: 32 pages, 23 figures. This is an author-created, un-copyedited
version of an article accepted for publication in PPCF. IOP Publishing Ltd
and IAEA are not responsible for any errors or omissions in this version of
the manuscript or any version derived from i
Models of dynamic extraction of lipid tethers from cell membranes
When a ligand that is bound to an integral membrane receptor is pulled, the
membrane and the underlying cytoskeleton can deform before either the membrane
delaminates from the cytoskeleton or the ligand detaches from the receptor. If
the membrane delaminates from the cytoskeleton, it may be further extruded and
form a membrane tether. We develop a phenomenological model for this processes
by assuming that deformations obey Hooke's law up to a critical force at which
the cell membrane locally detaches from the cytoskeleton and a membrane tether
forms. We compute the probability of tether formation and show that they can be
extruded only within an intermediate range of force loading rates and pulling
velocities. The mean tether length that arises at the moment of ligand
detachment is computed as are the force loading rates and pulling velocities
that yield the longest tethers.Comment: 16 pages, 7 figure
- …