1,401 research outputs found
Coarse-grained computations of demixing in dense gas-fluidized beds
We use an "equation-free", coarse-grained computational approach to
accelerate molecular dynamics-based computations of demixing (segregation) of
dissimilar particles subject to an upward gas flow (gas-fluidized beds). We
explore the coarse-grained dynamics of these phenomena in gently fluidized beds
of solid mixtures of different densities, typically a slow process for which
reasonable continuum models are currently unavailable
A STUDY ON THE ADVANTAGES OF SHORT SEA SHIPPING AND ITS IMPORTANCE IN COMBINED TRANSPORT
Ulaştırma sistemlerinin gelişim süreci içerisinde karayolları, altyapısı kısa zamanda tamamlanan ve bu nedenle en çok tercih edilen taşımacılık şekli olurken, günümüzde bu taşımacılık şekli; ulaştırma kaynaklı hava kirliliği, ses ve görüntü kirliliği, ölümlü ve yaralanmalı kaza istatistikleri içerisinde en büyük paya sahiptir. Bu ulaştırma modunun sebep olduğu olumsuz etkileri en aza indirmek çoğu gelişmiş ve gelişmekte olan ülkelerin ulaştırma stratejilerinde yer almaktadır. Yapılan çalışmalarda, karayolundaki taşımacılık hacminin ve sebep olduğu olumsuz etkilerin, mevcut talebin diğer taşıma modlarına kaydırılarak azaltılabileceği konusunda görüş birliğine varılmıştır. Kombine taşımacılık, içinde bulunulan coğrafi koşullar da göz önünde bulundurularak, taşıma zincirinin büyük kısmı denizyolu ve demiryolunu içerdiği için modlar arası taşıma talebi aktarımında optimum çözüm şeklidir. Türkiye, yarımadaya benzer coğrafi yapısı ile kombine taşımacılık açısından avantajlı bir ülke konumundadır. Yatay taşıma rotalarında direkt olarak karayolu yerine deniz yolunu tercih edilebilir veya denizyolu ve demiryolu ağırlıklı kombine taşımacılık yapılması sağlanabilir. Türkiye'de kombine taşımacılık yeterince gelişememiş ve bahsi geçen avantajları iyi değerlendirilememiştir. Bu çalışmada, karayolu taşıma moduna alternatif olan kısa mesafe deniz taşıması ve kombine taşımacılık modu; emisyon, yakıt tüketimi, taşıma maliyetleri ve taşıma zamanı değişkenleri bazında karayolu taşıması ile karşılaştırılmış ve kombine taşımacılığın avantajlarının gösterilmesi amaçlanmıştır. Among the transportation modes, road has always been the most preferred form of transport mode due to having advantage of the time required for the infrastructure. However, it has the highest share in the percentage of transportation-related emissions, noise and visual pollution, fatalities and accidents with injuries. Minimizing the adverse effects that caused by the road is always on the transport strategy of most of the developed and developing countries. It was agreed in the studies that the current demand and the adverse effects caused by the volume of road transport can be reduced by shifting demands to the other modes of transportation. Combined transportation taking into consideration the geographical conditions that contains a large part of the sea and railway in transport chain is the optimum solution for the transfer of road transport demand to greener mode. Turkey is in an advantageous position with its peninsular structure in terms of combined transport. Combined transportation with sea, rail and road could be utilized even for parallel transportation of goods. Although it has potential in Turkey, combined transportation has not developed much yet. In this study, short haul sea transport and combined transport mode as an alternative to highway transport mode, is compared with road transportation in terms of emissions, fuel consumption, transportation time, transportation costs and the advantages of combined transport are highlighte
Quartz Plate Calorimeter as SLHC Upgrade to CMS Hadronic EndCap Calorimeters
Due to an expected increase in radiation damage under super-LHC conditions, we propose to substitute the scintillator tiles in the original design of the hadronic endcap (HE) calorimeter with quartz plates. Quartz is proved to be radiation hard by the radiation damage tests with electron, proton, neutron and gamma beams. Using wavelength shifting fibers, it is possible to collect efficiently the Cherenkov light generated in quartz plates. This paper summarizes the results from various test beams, bench tests, and Geant4 simulations done on methods of collecting light from quartz plates, as well as radiation hardness tests on quartz material
Quantum mechanical path integrals and thermal radiation in static curved spacetimes
The propagator of a spinless particle is calculated from the quantum
mechanical path integral formalism in static curved spacetimes endowed with
event-horizons. A toy model, the Gui spacetime, and the 2D and 4D Schwarzschild
black holes are considered. The role of the topology of the coordinates
configuration space is emphasised in this framework. To cover entirely the
above spacetimes with a single set of coordinates, tortoise coordinates are
extended to complex values. It is shown that the homotopic properties of the
complex tortoise configuration space imply the thermal behaviour of the
propagator in these spacetimes. The propagator is calculated when end points
are located in identical or distinct spacetime regions separated by one or
several event-horizons. Quantum evolution through the event-horizons is shown
to be unitary in the fifth variable.Comment: 22 pages, 10 figure
Shortcuts to adiabaticity in a time-dependent box
A method is proposed to drive an ultrafast non-adiabatic dynamics of an
ultracold gas trapped in a box potential. The resulting state is free from
spurious excitations associated with the breakdown of adiabaticity, and
preserves the quantum correlations of the initial state up to a scaling factor.
The process relies on the existence of an adiabatic invariant and the inversion
of the dynamical self-similar scaling law dictated by it. Its physical
implementation generally requires the use of an auxiliary expulsive potential
analogous to those used in soliton control. The method is extended to a broad
family of many-body systems. As illustrative examples we consider the ultrafast
expansion of a Tonks-Girardeau gas and of Bose-Einstein condensates in
different dimensions, where the method exhibits an excellent robustness against
different regimes of interactions and the features of an experimentally
realizable box potential.Comment: 6 pp, 4 figures, typo in Eq. (6) fixe
Forward Neutron Production at the Fermilab Main Injector
We have measured cross sections for forward neutron production from a variety
of targets using proton beams from the Fermilab Main Injector. Measurements
were performed for proton beam momenta of 58 GeV/c, 84 GeV/c, and 120 GeV/c.
The cross section dependence on the atomic weight (A) of the targets was found
to vary as where is for a beam momentum of
58 GeV/c and 0.540.05 for 120 GeV/c. The cross sections show reasonable
agreement with FLUKA and DPMJET Monte Carlos. Comparisons have also been made
with the LAQGSM Monte Carlo.Comment: Accepted for publication in Physical Review D. This version
incorporates small changes suggested by referee and small corrections in the
neutron production cross sections predicted by FLUK
Measurement of Charged Pion Production Yields off the NuMI Target
The fixed-target MIPP experiment, Fermilab E907, was designed to measure the
production of hadrons from the collisions of hadrons of momenta ranging from 5
to 120 GeV/c on a variety of nuclei. These data will generally improve the
simulation of particle detectors and predictions of particle beam fluxes at
accelerators. The spectrometer momentum resolution is between 3 and 4%, and
particle identification is performed for particles ranging between 0.3 and 80
GeV/c using , time-of-flight and Cherenkov radiation measurements. MIPP
collected events of 120 GeV Main Injector protons striking a
target used in the NuMI facility at Fermilab. The data have been analyzed and
we present here charged pion yields per proton-on-target determined in bins of
longitudinal and transverse momentum between 0.5 and 80 GeV/c, with combined
statistical and systematic relative uncertainties between 5 and 10%.Comment: 15 pages, 13 figure
Patterns and Collective Behavior in Granular Media: Theoretical Concepts
Granular materials are ubiquitous in our daily lives. While they have been a
subject of intensive engineering research for centuries, in the last decade
granular matter attracted significant attention of physicists. Yet despite a
major efforts by many groups, the theoretical description of granular systems
remains largely a plethora of different, often contradicting concepts and
approaches. Authors give an overview of various theoretical models emerged in
the physics of granular matter, with the focus on the onset of collective
behavior and pattern formation. Their aim is two-fold: to identify general
principles common for granular systems and other complex non-equilibrium
systems, and to elucidate important distinctions between collective behavior in
granular and continuum pattern-forming systems.Comment: Submitted to Reviews of Modern Physics. Full text with figures (2Mb
pdf) avaliable at
http://mti.msd.anl.gov/AransonTsimringReview/aranson_tsimring.pdf Community
responce is appreciated. Comments/suggestions send to [email protected]
Biomacromolecules in Recent Phosphate-Shelled Brachiopods: Identification and Characterization of Chitin Matrix
Abstract: Phosphate-shelled brachiopods differ in filter-feeding lifestyle, with Lingula anatina an active infaunal burrower, and Discinisca tenuis a shallow marine epibenthic animal. The shells of these animals are built of organophosphatic constituents, the organic fibres/sheets reinforced with calcium phosphate to provide a sophisticated ultrastructural robustness. This investigation examined the nature of the organic fibres in order to improve understanding of how living organisms produce hierarchically structured biomaterials. Unlike powdered samples commonly used in previous studies, organic fibres were isolated for the first time and the shell fractions were purified, in order to study the content and nature of the biopolymer fibres. Biochemical methods including Calcofluor staining revealed a chitin matrix. Ultrastructural analysis, thermal gravimetric analysis, and spectroscopic analyses show that the core polysaccharide framework is composed of layers of β-chitin sheets and/or fibrils that are coated with a fibrous organic matrix. There is more chitin matrix in the L. anatina shells (26.6 wt.%) compared to the D. tenuis shells (12.9 wt.%). Taken together, the data show that the chitin matrix contributes to increased skeletal strength, making L. anatina highly adapted for life as an active burrower. In comparison, D. tenuis contains less chitin and lives as attached epibenthos in a shallow marine environment. Graphical abstract: [Figure not available: see fulltext.] First spectroscopic evidence of β-chitin sheets in recent organophosphatic brachiopods. © 2021, The Author(s).OBAA is grateful to Uppsala University for support through the VR Project number 2018-03390. The research for this paper was supported by the Swedish Research Council (VR Project no. 2018-03390 to LEH, GAB and SCG), by the National Natural Science Foundation of China (41720104002, 41621003 and 41890844 to NWU members), and by a Zhongjian Yang Scholarship to LEH from the Department of Geology, Northwest University, Xi’an. GAB’s research is also funded by a 1000 Talent Shaanxi Province Fellowship at Northwest University, Xi’an
Comparison of NITAG policies and working processes in selected developed countries
BACKGROUND: Vaccines are specific medicines characterized by two country-specific market access processes: (1) a recommendation by National Immunization Technical Advisory Group (NITAG), and (2) a funding policy decision. OBJECTIVES: The objective of this study was to compare and analyze NITAGs of 13 developed countries by describing vaccination committees' bodies and working processes. METHODS: Information about NITAGs bodies and working processes was searched from official sources from June 2011 to November 2012. Retrieved information was completed from relevant articles identified through a systematic literature review and by information provided by direct contact with NITAGs or parent organizations. An expert panel was also conducted to discuss, validate, and provide additional input on obtained results. RESULTS: While complete information, defined as 100%, was retrieved only for the UK, at least 80% of data was retrieved for 9 countries out of the 13 selected countries. Terms of references were identified in 7 countries, and the main mission for all NITAGs was to provide advice for National immunization programs. However, these terms of references did not fully encompass all the actual missions of the NITAGs. Decision analysis frameworks were identified for 10 out of the 13, and all NITAGs considered at least four criteria for decision-making: disease burden, efficacy/effectiveness, safety and cost-effectiveness. Advices were published by most NITAGs, but few NITAGs published meeting agendas and minutes. Only the United States had open meetings. CONCLUSIONS: This study supports previous findings about the disparities in NITAGs processes which could potentially explain the disparity in access to vaccinations and immunization programs across Europe. With NITAGs recommendations being used by policy decision makers for implementation and funding of vaccine programs, guidances should be well-informed and transparent to ensure National Immunization Programs' (NIP) credibility among the public and health care professionals
- …