Al based alloys containing amorphous and nanostructured phases

Nanostructured or partially amorphous Al-based alloys are attractive candidates for advanced high-strength lightweight materials. The strength of such materials is often 2 - 3 times higher than the strength of commercial crystalline alloys. Further property improvements are achievable by designing multi-phase composite materials with optimized length scale and intrinsic properties of the constituent phases. Such alloys can be prepared by quenching from the melt or by powder metallurgy using mechanical attrition techniques. This paper focuses on mechanically attrited Al-based powders containing amorphous or nano-crystalline phases, Al-based MMCs containing metallic glass reinforcement and on their consolidation into bulk specimens. Selected examples of mechanical deformation behavior are presented, revealing that the properties can be tuned within a wide range of strength and ductility as a function of size and volume fraction of the different phases

Influence of hand position on the near-effect in 3D attention

Voluntary reorienting of attention in real depth situations is characterized by an attentional bias to locations near the viewer once attention is deployed to a spatially cued object in depth. Previously this effect (initially referred to as the ‘near-effect’) was attributed to access of a 3D viewer-centred spatial representation for guiding attention in 3D space. The aim of this study was to investigate whether the near-bias could have been associated with the position of the response-hand, always near the viewer in previous studies investigating endogenous attentional shifts in real depth. In Experiment 1, the response-hand was placed at either the near or far target depth in a depth cueing task. Placing the response-hand at the far target depth abolished the near-effect, but failed to bias spatial attention to the far location. Experiment 2 showed that the response-hand effect was not modulated by the presence of an additional passive hand, whereas Experiment 3 confirmed that attentional prioritization of the passive hand was not masked by the influence of the responding hand on spatial attention in Experiment 2. The pattern of results is most consistent with the idea that response preparation can modulate spatial attention within a 3D viewer-centred spatial representation

Biases in the perceived timing of perisaccadic perceptual and motor events

Subjects typically experience the temporal interval immediately following a saccade as longer than a comparable control interval. One explanation of this effect is that the brain antedates the perceptual onset of a saccade target to around the time of saccade initiation. This could explain the apparent continuity of visual perception across eye movements. Thisantedating account was tested in three experiments in which subjects made saccades of differing extents and then judged either the duration or the temporal order of key events. Postsaccadic stimuli underwent subjective temporal lengthening and had early perceived onsets. A temporally advanced awareness of saccade completion was also found, independently of antedating effects. These results provide convergent evidence supporting antedating and differentiating it from other temporal biases

A deficit of spatial remapping in constructional apraxia after right-hemisphere stroke

This Article is provided by the Brunel Open Access Publising Fund - Copyright @ 2010 Oxford University PressConstructional apraxia refers to the inability of patients to copy accurately drawings or three-dimensional constructions. It is a common disorder after right parietal stroke, often persisting after initial problems such as visuospatial neglect have resolved. However, there has been very little experimental investigation regarding mechanisms that might contribute to the syndrome. Here, we examined whether a key deficit might be failure to integrate visual information correctly from one fixation to the next. Specifically, we tested whether this deficit might concern remapping of spatial locations across saccades. Right-hemisphere stroke patients with constructional apraxia were compared to patients without constructional problems and neurologically healthy controls. Participants judged whether a pattern shifted position (spatial task) or changed in pattern (non-spatial task) across two saccades, compared to a control condition with an equivalent delay but without intervening eye movements. Patients with constructional apraxia were found to be significantly impaired in position judgements with intervening saccades, particularly when the first saccade of the sequence was to the right. The importance of these remapping deficits in constructional apraxia was confirmed through a highly significant correlation between saccade task performance and constructional impairment on standard neuropsychological tasks. A second study revealed that even single saccades to the right can impair constructional apraxia patients’ perception of location shifts. These data are consistent with the view that rightward eye movements result in loss of remembered spatial information from previous fixations, presumably due to constructional apraxia patients’ damage to the right-hemisphere regions involved in remapping locations across saccades. These findings provide the first evidence for a deficit in remapping visual information across saccades underlying right-hemisphere constructional apraxia.European Commission Marie Curie Intra-European Fellowship (011457 to C.R.) and a Wellcome Trust Senior Fellowship (to M.H.)

‘‘Cooling by Heating’’- Demonstrating the Significance of the Longitudinal Specific Heat

Heating a solid sphere at its surface induces mechanical stresses inside the sphere. If a finite amount of heat is supplied, the stresses gradually disappear as temperature becomes homogeneous throughout the sphere. We show that before this happens, there is a temporary lowering of pressure and density in the interior of the sphere, inducing a transient lowering of the temperature here. For ordinary solids this effect is small because c_{p}≅c_{V}. For fluent liquids the effect is negligible because their dynamic shear modulus vanishes. For a liquid at its glass transition, however, the effect is generally considerably larger than in solids. This paper presents analytical solutions of the relevant coupled thermoviscoelastic equations. In general, there is a difference between the isobaric specific heat c_{p} measured at constant isotropic pressure and the longitudinal specific heat c_{l} pertaining to mechanical boundary conditions that confine the associated expansion to be longitudinal. In the exact treatment of heat propagation, the heat-diffusion constant contains c_{l} rather than c_{p}. We show that the key parameter controlling the magnitude of the “cooling-by-heating“ effect is the relative difference between these two specific heats. For a typical glass-forming liquid, when the temperature at the surface is increased by 1 K, a lowering of the temperature at the sphere center of the order of 5 mK is expected if the experiment is performed at the glass transition. The cooling-by-heating effect is confirmed by measurements on a glucose sphere at the glass transition