Measurement of the hadronic photon structure function F_{2}^{γ} at LEP2

The hadronic structure function of the photon F_{2}^{γ} (x, Q²) is measured as a function of Bjorken x and of the photon virtuality Q² using deep-inelastic scattering data taken by the OPAL detector at LEP at e⁺e⁻ centre-of-mass energies from 183 to 209 GeV. Previous OPAL measurements of the x dependence of F_{2}^{γ} are extended to an average Q² of 〈Q²〉=780 GeV² using data in the kinematic range 0.15<x<0.98. The Q² evolution of F_{2}^{γ} is studied for 12.1<〈Q²〉<780 GeV² using three ranges of x. As predicted by QCD, the data show positive scaling violations in F_{2}^{γ} with F_{2}^{γ} (Q²)/α = (0.08±0.02⁺⁰·⁰⁵_₀.₀₃) + (0.13±0.01⁺⁰·⁰¹_₀.₀₁) lnQ², where Q² is in GeV², for the central x region 0.10–0.60. Several parameterisations of F_{2}^{γ} are in qualitative agreement with the measurements whereas the quark-parton model prediction fails to describe the data

Measurement of the charm structure function F_{2,c)^{γ} of the photon at LEP

The production of charm quarks is studied in deep-inelastic electron–photon scattering using data recorded by the OPAL detector at LEP at nominal e⁺e⁻ centre-of-mass energies from 183 to 209 GeV. The charm quarks have been identified by full reconstruction of charged D* mesons using their decays into D⁰π with the D⁰ observed in two decay modes with charged particle final states, Kπ and Kπππ. The cross-section σ^{D*} for production of charged D* in the reaction e⁺e⁻→e⁺e⁻D*Χ is measured in a restricted kinematical region using two bins in Bjorken x, 0.00140.1 the perturbative QCD calculation at next-to-leading order agrees perfectly with the measured cross-section. For x<0.1 the measured cross-section is 43.8±14.3±6.3±2.8 pb with a next-to-leading order prediction of 17.0⁺²·⁹_₂.₃ pb

Measurement of triple gauge boson couplings from W⁺W⁻ production at LEP energies up to 189 GeV

A measurement of triple gauge boson couplings is presented, based on W-pair data recorded by the OPAL detector at LEP during 1998 at a centre-of-mass energy of 189 GeV with an integrated luminosity of 183 pb⁻¹. After combining with our previous measurements at centre-of-mass energies of 161–183 GeV we obtain κ = 0.97_{-0.16}^{+0.20}, g_{1}^{z} = 0.991_{-0.057}^{+0.060} and λ = -0.110_{-0.055}^{+0.058}, where the errors include both statistical and systematic uncertainties and each coupling is determined by setting the other two couplings to their Standard Model values. These results are consistent with the Standard Model expectations

The Ecological Impacts of Contaminated Sediment from Abandoned Metal Mines

Contains public sector information licensed under the Open Government Licence v3.0. The OGL requires that users acknowledge the information provider and/or source of the information with an attribution statement.Pollution from abandoned non-coal (i.e. metal) mines is a serious impediment to rivers meeting the water quality targets set out in River Basin Management Plans. Recent work has identified the mines most likely to be causing a significant environmental impact and hence where efforts to prevent pollution need to be focussed. Yet, it is not clear to what extent rivers, and the animal and plant life they support, are impacted by the legacy of past pollution still bound up in river sediments. Work will be undertaken to reduce toxic metals in mine waters before they enter the river. However, if riverbed sediments are already contaminated and affecting life in rivers, the planned clean-up of mine water sources may not result in recovery of ecological condition. A controlled laboratory experiment was undertaken where river invertebrates (mayfly larvae) from an uncontaminated site were incubated with contaminated riverbed sediment collected downstream of an abandoned metal mine. Concentrations of metals in the tissues of the mayflies increased over the duration of the incubation, particularly those metals that were in high concentrations in the sediment, i.e. cadmium, copper and zinc. As the sediment was the only substantial source of metals in the experiment, it is apparent that the contaminated riverbed sediment was acting as a source of bioavailable metals. It is likely that contaminated sediments, including riverbed sediment, will act as a source of bioavailable metals, at least to benthic organisms, even where mine drainage water is treated to reduce metal concentrations. Metal toxicity occurs when the rate of metal uptake into an organism exceeds the combined rates of excretion and physiological detoxification. Current tests of metal toxicity on biota typically do not match in scale (temporal, spatial and taxonomic range) with assessments of ecological quality undertaken for management, which raises questions regarding the adequacy of environmental limits based on laboratory testing. Existing data were compiled describing geochemistry of riverbed sediment and the Biological Quality Elements invertebrates, diatoms, macrophytes and fish, collected by the regulatory authorities to assess the condition of rivers. As toxic effects of trace metals were not expected at low concentrations, the biological response to sediment metal concentration was determined using a threshold model. Thresholds were found for biotic metrics based on species richness, but other metrics (diatom EQR, macrophyte EQR and invertebrate ASPT) displayed implausible positive relationships with sediment metal concentrations and should not be relied upon for classification of ecological status in waterbodies affected by mining. New data were collected from 20 spatially-independent river catchments in areas affected by metal mine facilities, including samples of the macroinvertebrate community, bioavailability of metals (assessed as metal concentrations in the body tissue of tolerant taxa), and sediment metal concentrations. There were strong correlations between sediment metal concentrations and measured bioavailability, particularly for copper and lead. Measurements of bioavailable metals were related to changes in taxon richness in the invertebrate samples. The data were used to develop a new biotic index (MetTol), which can be used to assess the extent of ecological damage from metal contamination using standard invertebrate monitoring data, and to construct dose response curves based on species sensitivities. A number of approaches were used to establish tolerable limits for sediment metal concentrations based on ecological data, and the results compared with existing Canadian sediment quality guidelines. The limits for copper derived from ecological data were most consistent with existing sediment guidelines. The limits for other metals (silver, arsenic, cadmium, nickel, lead and zinc) derived from ecological data were up to an order of magnitude above the Canadian interim sediment quality guidelines. These existing guidelines, based on toxicological data, may be too precautionary, and we suggest that guideline sediment concentrations based on ecological data may provide a more appropriate level of protection for the environment

Determination of alpha_s using Jet Rates at LEP with the OPAL detector

Hadronic events produced in e+e- collisions by the LEP collider and recorded by the OPAL detector were used to form distributions based on the number of reconstructed jets. The data were collected between 1995 and 2000 and correspond to energies of 91 GeV, 130-136 GeV and 161-209 GeV. The jet rates were determined using four different jet-finding algorithms (Cone, JADE, Durham and Cambridge). The differential two-jet rate and the average jet rate with the Durham and Cambridge algorithms were used to measure alpha(s) in the LEP energy range by fitting an expression in which order alpah_2s calculations were matched to a NLLA prediction and fitted to the data. Combining the measurements at different centre-of-mass energies, the value of alpha_s (Mz) was determined to be alpha(s)(Mz)=0.1177+-0.0006(stat.)+-0.0012$(expt.)+-0.0010(had.)+-0.0032(theo.) \.Comment: 40 pages, 17 figures, Submitted to Euro. Phys. J.

Measurement of the partial widths of the Z into up- and down-type quarks

Using the entire OPAL LEP1 on-peak Z hadronic decay sample, Z -> qbarq gamma decays were selected by tagging hadronic final states with isolated photon candidates in the electromagnetic calorimeter. Combining the measured rates of Z -> qbarq gamma decays with the total rate of hadronic Z decays permits the simultaneous determination of the widths of the Z into up- and down-type quarks. The values obtained, with total errors, were Gamma u = 300 ^{+19}_{-18} MeV and Gamma d = 381 ^{+12}_{-12} MeV. The results are in good agreement with the Standard Model expectation.Comment: 22 pages, 5 figures, Submitted to Phys. Letts.

Colour reconnection in e+e- -> W+W- at sqrt(s) = 189 - 209 GeV

The effects of the final state interaction phenomenon known as colour reconnection are investigated at centre-of-mass energies in the range sqrt(s) ~ 189-209 GeV using the OPAL detector at LEP. Colour reconnection is expected to affect observables based on charged particles in hadronic decays of W+W-. Measurements of inclusive charged particle multiplicities, and of their angular distribution with respect to the four jet axes of the events, are used to test models of colour reconnection. The data are found to exclude extreme scenarios of the Sjostrand-Khoze Type I (SK-I) model and are compatible with other models, both with and without colour reconnection effects. In the context of the SK-I model, the best agreement with data is obtained for a reconnection probability of 37%. Assuming no colour reconnection, the charged particle multiplicity in hadronically decaying W bosons is measured to be (nqqch) = 19.38+-0.05(stat.)+-0.08 (syst.).Comment: 30 pages, 9 figures, Submitted to Euro. Phys. J.

Scaling violations of quark and gluon jet fragmentation functions in e+e- annihilations at sqrt(s) = 91.2 and 183-209 GeV

Flavour inclusive, udsc and b fragmentation functions in unbiased jets, and flavour inclusive, udsc, b and gluon fragmentation functions in biased jets are measured in e+e- annihilations from data collected at centre-of-mass energies of 91.2, and 183-209 GeV with the OPAL detector at LEP. The unbiased jets are defined by hemispheres of inclusive hadronic events, while the biased jet measurements are based on three-jet events selected with jet algorithms. Several methods are employed to extract the fragmentation functions over a wide range of scales. Possible biases are studied in the results are obtained. The fragmentation functions are compared to results from lower energy e+e- experiments and with earlier LEP measurements and are found to be consistent. Scaling violations are observed and are found to be stronger for the fragmentation functions of gluon jets than for those of quarks. The measured fragmentation functions are compared to three recent theoretical next-to-leading order calculations and to the predictions of three Monte Carlo event generators. While the Monte Carlo models are in good agreement with the data, the theoretical predictions fail to describe the full set of results, in particular the b and gluon jet measurements.Comment: 46 pages, 17 figures, Submitted to Eur. Phys J.

Search for R-Parity Violating Decays of Scalar Fermions at LEP

A search for pair-produced scalar fermions under the assumption that R-parity is not conserved has been performed using data collected with the OPAL detector at LEP. The data samples analysed correspond to an integrated luminosity of about 610 pb-1 collected at centre-of-mass energies of sqrt(s) 189-209 GeV. An important consequence of R-parity violation is that the lightest supersymmetric particle is expected to be unstable. Searches of R-parity violating decays of charged sleptons, sneutrinos and squarks have been performed under the assumptions that the lightest supersymmetric particle decays promptly and that only one of the R-parity violating couplings is dominant for each of the decay modes considered. Such processes would yield final states consisting of leptons, jets, or both with or without missing energy. No significant single-like excess of events has been observed with respect to the Standard Model expectations. Limits on the production cross- section of scalar fermions in R-parity violating scenarios are obtained. Constraints on the supersymmetric particle masses are also presented in an R-parity violating framework analogous to the Constrained Minimal Supersymmetric Standard Model.Comment: 51 pages, 24 figures, Submitted to Eur. Phys. J.

Tests of model of color reconnection and a search for glueballs using gluon jets with a rapidity gap

Gluon jets with a mean energy of 22 GeV and purity of 95% are selected from hadronic Z0 decay events produced in e+e- annihilations. A subsample of these jets is identified which exhibits a large gap in the rapidity distribution of particles within the jet. After imposing the requirement of a rapidity gap, the gluon jet purity is 86%. These jets are observed to demonstrate a high degree of sensitivity to the presence of color reconnection, i.e. higher order QCD processes affecting the underlying color structure. We use our data to test three QCD models which include a simulation of color reconnection: one in the Ariadne Monte Carlo, one in the Herwig Monte Carlo, and the other by Rathsman in the Pythia Monte Carlo. We find the Rathsman and Ariadne color reconnection models can describe our gluon jet measurements only if very large values are used for the cutoff parameters which serve to terminate the parton showers, and that the description of inclusive Z0 data is significantly degraded in this case. We conclude that color reconnection as implemented by these two models is disfavored. The signal from the Herwig color reconnection model is less clear and we do not obtain a definite conclusion concerning this model. In a separate study, we follow recent theoretical suggestions and search for glueball-like objects in the leading part of the gluon jets. No clear evidence is observed for these objects.Comment: 42 pages, 18 figure