55 research outputs found
Recommended from our members
A new mechanistic model of critical heat flux in forced-convection subcooled boiling
Because of its practical importance and various industrial applications, the process of subcooled flow boiling has attracted a lot of attention in the research community in the past. However, the existing models are primarily phenomenological and are based on correlating experimental data rather than on a first-principle analysis of the governing physical phenomena. Even though the mechanisms leading to critical heat flux (CHF) are very complex, the recent progress in the understanding of local phenomena of multiphase flow and heat transfer, combined with the development of mathematical models and advanced Computational Fluid Dynamics (CFD) methods, makes analytical predictions of CHF quite feasible. Various mechanisms leading to CHF in subcooled boiling have been investigated. A new model for the predictions of the onset of CHF has been developed. This new model has been coupled with the overall boiling channel model, numerically implemented in the CFX 4 computer code, tested and validated against the experimental data of Hino and Ueda. The predicted critical heat flux for various channel operating conditions shows good agreement with the measurements using the aforementioned closure laws for the various local phenomena governing nucleation and bubble departure from the wall. The observed differences are consistent with typical uncertainties associated with CHF data
Anisotropic London Penetration Depth and Superfluid Density in Single Crystals of Iron-based Pnictide Superconductors
In- and out-of-plane magnetic penetration depths were measured in three
iron-based pnictide superconducting systems. All studied samples of both 122
systems show a robust power-law behavior, , with the
sample-dependent exponent n=2-2.5, which is indicative of unconventional
pairing. This scenario could be possible either through scattering in a state or due to nodes in the superconducting gap. In the Nd-1111 system, the
interpretation of data may be obscured by the magnetism of rare-earth ions. The
overall anisotropy of the pnictide superconductors is small. The 1111 system is
about two times more anisotropic than the 122 system. Our data and analysis
suggest that the iron-based pnictides are complex superconductors in which a
multiband three-dimensional electronic structure and strong magnetic
fluctuations play important roles.Comment: submitted to a special issue of Physica C on superconducting
pnictide
A lumped parameter model for linear and non-linear analysys of excursive and density-wave instabilities in boiling channels
A simple lumped parameter model is presented which is suitable for both the linear and
non-linear analysis of density-wave and excursive (Ledinegg) instabilities in a boiling
channel subjected to a constant pressure drop (i.e."parallel channel" boundary conditions); a lumped parameter heater dynamics model is also included .
Both linear and non-linear stability analysis was performed; the marginal stability
boundaries were calculated, and both subcritical and supercritical Hopf bifurcations were detected. Finally, the limits of application of the quasi-linear Hopf bifurcation theory are discussed, particularly with respect to determining the range of potentially dangerous operating conditions of the system
Recommended from our members
Mechanistic modeling of CHF in forced-convection subcooled boiling
Because of the complexity of phenomena governing boiling heat transfer, the approach to solve practical problems has traditionally been based on experimental correlations rather than mechanistic models. The recent progress in computational fluid dynamics (CFD), combined with improved experimental techniques in two-phase flow and heat transfer, makes the use of rigorous physically-based models a realistic alternative to the current simplistic phenomenological approach. The objective of this paper is to present a new CFD model for critical heat flux (CHF) in low quality (in particular, in subcooled boiling) forced-convection flows in heated channels
Relationship between arc voltage, current and arc length in TIG welding
SIGLEAvailable from British Library Document Supply Centre- DSC:7761.039(RD/M--1773/RR88) / BLDSC - British Library Document Supply CentreGBUnited Kingdo
Spectral edge image fusion: theory and applications
NoThis paper describes a novel approach to the fusion of multidimensional images for colour displays. The goal of the method is to generate an output image whose gradient matches that of the input as closely as possible. It achieves this using a constrained contrast mapping paradigm in the gradient domain, where the structure tensor of a high-dimensional gradient representation is mapped exactly to that of a low-dimensional gradient field which is subsequently reintegrated to generate an output. Constraints on the output colours are provided by an initial RGB rendering to produce ‘naturalistic’ colours: we provide a theorem for projecting higher-D contrast onto the initial colour gradients such that they remain close to the original gradients whilst maintaining exact high-D contrast. The solution to this constrained optimisation is closed-form, allowing for a very simple and hence fast and efficient algorithm. Our approach is generic in that it can map any N-D image data to any M-D output, and can be used in a variety of applications using the same basic algorithm. In this paper we focus on the problem of mapping N-D inputs to 3-D colour outputs. We present results in three applications: hyperspectral remote sensing, fusion of colour and near-infrared images, and colour visualisation of MRI Diffusion-Tensor imaging
- …