20 research outputs found
Matter from light-light scattering via Breit-Wheeler events produced by two interacting Compton sources
We present the dimensioning of a photon-photon collider based on Compton gamma sources for the observation of Breit-Wheeler pair production and QED \u3b3\u3b3 events. Two symmetric electron beams, generated by photocathodes and accelerated in linacs, produce two gamma ray beams through Compton back scattering with two J-class lasers. Tuning the system energy above the Breit-Wheeler cross section threshold, a flux of electron-positron pairs is generated out of light-light interaction. The process is analyzed by start-to-end simulations. Realistic numbers of the secondary particle yield, referring to existing state-of-the-art set-ups and a discussion of the feasibility of the experiment taking into account the background signal are presented
Generation of primary photons through inverse Compton scattering using a Monte Carlo simulation code
n/
Improving performance of inverse Compton sources through laser chirping
We present a new paradigm for computation of radiation spectra in the
non-linear regime of operation of inverse Compton sources characterized by high
laser intensities. The resulting simulations show an unprecedented level of
agreement with the experiments. Increasing the laser intensity changes the
longitudinal velocity of the electrons during their collision, leading to
considerable non-linear broadening in the scattered radiation spectra. The
effects of such ponderomotive broadening are so deleterious that most inverse
Compton sources either remain at low laser intensities or pay a steep price to
operate at a small fraction of the physically possible peak spectral output.
This ponderomotive broadening can be reduced by a suitable frequency modulation
(also referred to as "chirping", which is not necessarily linear) of the
incident laser pulse, thereby drastically increasing the peak spectral density.
This frequency modulation, included in the new code as an optional
functionality, is used in simulations to motivate the experimental
implementation of this transformative technique.Comment: 7 pages, 5 figure
A Laser Frequency Transverse Modulation Might Compensate for the Spectral Broadening Due to Large Electron Energy Spread in Thomson Sources
Compact laser plasma accelerators generate high-energy electron beams with increasing quality. When used in inverse Compton backscattering, however, the relatively large electron energy spread jeopardizes potential applications requiring small bandwidths. We present here a novel interaction scheme that allows us to compensate for the negative effects of the electron energy spread on the spectrum, by introducing a transverse spatial frequency modulation in the laser pulse. Such a laser chirp, together with a properly dispersed electron beam, can substantially reduce the broadening of the Compton bandwidth due to the electron energy spread. We show theoretical analysis and numerical simulations for hard X-ray Thomson sources based on laser plasma accelerators
A new method for spatial mode shifting of stabilized optical cavities for the generation of dual-color X-rays
We propose an innovative method to shift the transversal position of the focal point of an optical cavity keeping it actively frequency stabilized. Our cavity is a 4 mirrors bow-tie cavity and the spatial shift of the resonant mode is obtained by properly rotating the two curved mirrors by piezo actuators. This method allows us to move the transversal position of the cavity focal point of 135 µm in a time of 50 ms, keeping the resonance condition of the cavity by means of the Pound–Drever–Hall technique. We propose to use this technique for the generation of 2-color X-rays via Inverse Compton Scattering (ICS). This technique exploits the large average power stored in the high finesse cavity by shifting the laser beam with respect to the electron beam trajectory, hence controlling the spatial superposition of the electron and photon beams in the interaction region. Arranging two cavities assembled one on top of the other, with different collision angle with the electron beam, allows the generation of X-ray bursts of different energies just by swiftly moving the two cavities, switching the two focal points onto the electron beam trajectory, thus activating in sequence two different ICS spectral lines
GeV-Class two-fold CW linac driven by an arc-compressor
We present a study of an innovative scheme to generate high repetition rate (MHz-class)
GeV electron beams by adopting a two-pass two-way acceleration in a super-conducting Linac
operated in Continuous Wave (CW) mode. The beam is accelerated twice in the Linac by being
re-injected, after the first pass, in opposite direction of propagation. The task of recirculating the
electron beam is performed by an arc compressor composed by 14 Double Bend Achromat (DBA).
In this paper, we study the main issues of the two-fold acceleration scheme, the electron beam
quality parameters preservation (emittance, energy spread), together with the bunch compression
performance of the arc compressor, aiming to operate an X-ray Free Electron Laser. The requested
power to supply the cryogenic plant and the RF sources is also significantly reduced w.r.t a
conventional one-pass SC Linac for the same final energy
OPTIMIZING RF LINACS AS DRIVERS FOR INVERSE COMPTON SOURCES: THE ELI-NP CASE
The design guide-lines of RF Linacs to fulfil the requirements of high spectral density Inverse Compton Sources for the photo-nuclear science are mostly taken from the expertise coming from high brightness electron Linacs driving X-ray FEL's. The main difference is the quest for maximum phase space density (instead of peak brightness), but many common issues and techniques are exploited, in order to achieve an optimum design and layout
for the machine. A relevant example in this field is the design of the hybrid C-band multi-bunch RF Linacs for the ELI-NP Gamma Beam System, aiming at improving by two orders of magnitude the present state of the art in spectral density available for the gamma-ray beam produced
BriXs ultra high fluxinverse compton source based on modified push-pull energy recovery linacs
We present a conceptual design for a compact X-ray Source BriXS (Bright and compact
X-ray Source). BriXS, the first stage of the Marix project, is an Inverse Compton Source (ICS) of
X-ray based on superconducting cavities technology for the electron beam with energy recirculation
and on a laser system in Fabry-Pérot cavity at a repetition rate of 100 MHz, producing 20–180 keV
monochromatic X-Rays devoted mainly to medical applications. An energy recovery scheme based on
a modified folded push-pull CW-SC twin Energy Recovery Linac (ERL) ensemble allows us to sustain
an MW-class beam power with almost one hundred kW active power dissipation/consumption
Scientific opportunies for bERLinPro 2020+, report with ideas and conclusions from bERLinProCamp 2019
The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL as driver for future light sources by setting up the bERLinPro (Berlin ERL Project) ERL with 50 MeV beam energy and high average current. The project is close to reach its major milestone in 2020, acceleration and recovery of a high brightness electron beam. The goal of bERLinProCamp 2019 was to discuss scientific opportunities for bERLinPro 2020+. bERLinProCamp 2019 was held on Tue, 17.09.2019 at Helmholtz-Zentrum Berlin, Berlin, Germany. This paper summarizes the main themes and output of the workshop