Experimental investigation and analysis of two sources of nozzle-thrust misalignment

Asymmetry of nozzle's throat produces oscillatory type net side-force axial profile. Using mean values of localized static pressure and Mach number, scaling laws for flat-plate supersonic flow over protrusion are applied to nozzle expansion cone irregularities to give approximate indication of perturbed-pressure profiles and induced side forces

Automotive fuel economy and emissions program

Experimental data were generated to support an assessment of the relationship between automobile fuel economy and emissions control systems. Tests were made at both the engine and vehicle levels. Detailed investigations were made on cold-start emissions devices, exhaust gas recirculation systems, and air injection reactor systems. Based on the results of engine tests, an alternative emission control system and modified control strategy were implemented and tested in the vehicle. With the same fuel economy and NOx emissions as the stock vehicle, the modified vehicle reduced HC and CO emissions by about 20 percent. By removing the NOx emissions constraint, the modified vehicle demonstrated about 12 percent better fuel economy than the stock vehicle

Cold-flow experimental investigation and analysis of two sources of nozzle thrust misalignment

Cold flow investigation and analysis of two nozzle thrust misalignmen

A Total-System View of Environmental Management

Man, vastly increasing in number and continuing to exploit his natural resources, has altered the quality of his environment until it is in danger of becoming unfit for human life. The reversal of this trend must begin with the formulation of a management system that encompasses the total cycle of man\u27s environmental manipulation — from the extraction of raw materials and the production of goods to the eventual disposal of those goods. This paper describes how environmental quality can be managed on a large scale and outlines the methods for implementing this management through the total-system approach

Measuring the Effects of Thread Placement on the Kendall Square KSR1

This paper describes a measurement study of the effects of thread placement on memory access times on the Kendall Square multiprocessor, the KSRl. The KSRl uses a conventional shared memory programming model in a distributed memory architecture. The architecture is based on a ring of rings of 64-bit superscalar microprocessors. The KSRl has a Cache-Only Memory Architecture (COMA). Memory consists of the local cache memoria attached to each processor. Whenever an address is accessed, the data item is automatically copied to the local cache memory module, 80 that access times for subsequent references will be minimal. If a local cache has space allocated for a particular data item, but does not have a current valid copy of that data item, then it is possible for the cache to acquire a valid read-only copy before it is requested by the local processor due to a request by a different processor that happens to pass by on the ring. This automatic prefetching can greatly reduce the average time for a thread to acquire data items. Because of the automatic prefetching, the time required to obtain a valid copy of a data item does not depend simply on the distance from the owner of the data item, but also depends on the placement and number of other processing threads which ehare the same data item. Also, the strategic placement of processing threads helps programs take advantage of the unique features of the memory architecture which help eliminate memory access bottlenecks for shared data sets. Experiments run on the KSRl across a wide variety of thread configurations show that shared memory access is accelerated through strategic placement of threads which share data. The results indicate strategies for improving the performance of applications programs, and illustrate that KSRl memory access times can remain nearly constant even when the number of participating threads increases

Advanced Air Bag Technology Assessment

As a result of the concern for the growing number of air-bag-induced injuries and fatalities, the administrators of the National Highway Traffic Safety Administration (NHTSA) and the National Aeronautics and Space Administration (NASA) agreed to a cooperative effort that "leverages NHTSA's expertise in motor vehicle safety restraint systems and biomechanics with NASAs position as one of the leaders in advanced technology development... to enable the state of air bag safety technology to advance at a faster pace..." They signed a NASA/NHTSA memorandum of understanding for NASA to "evaluate air bag to assess advanced air bag performance, establish the technological potential for improved technology (smart) air bag systems, and identify key expertise and technology within the agency (i.e., NASA) that can potentially contribute significantly to the improved effectiveness of air bags." NASA is committed to contributing to NHTSAs effort to: (1) understand and define critical parameters affecting air bag performance; (2) systematically assess air bag technology state of the art and its future potential; and (3) identify new concepts for air bag systems. The Jet Propulsion Laboratory (JPL) was selected by NASA to respond to the memorandum of understanding by conducting an advanced air bag technology assessment. JPL analyzed the nature of the need for occupant restraint, how air bags operate alone and with safety belts to provide restraint, and the potential hazards introduced by the technology. This analysis yielded a set of critical parameters for restraint systems. The researchers examined data on the performance of current air bag technology, and searched for and assessed how new technologies could reduce the hazards introduced by air bags while providing the restraint protection that is their primary purpose. The critical parameters which were derived are: (1) the crash severity; (2) the use of seat belts; (3) the physical characteristics of the occupants; (4) the proximity of the occupants to the airbag module; (5) the deployment time, which includes the time to sense the need for deployment, the inflator response parameters, the air bag response, and the reliability of the air bag. The requirements for an advanced air bag technology is discussed. These requirements includes that the system use information related to: (1) the crash severity; (2) the status of belt usage; (3) the occupant category; and (4) the proximity to the air bag to adjust air bag deployment. The parameters for the response of the air bag are: (1) deployment time; (2) inflator parameters; and (3) air bag response and reliability. The state of occupant protection advanced technology is reviewed. This review includes: the current safety restraint systems, and advanced technology characteristics. These characteristics are summarized in a table, which has information regarding the technology item, the potential, and an date of expected utilization. The use of technology and expertise at NASA centers is discussed. NASA expertise relating to sensors, computing, simulation, propellants, propulsion, inflatable systems, systems analysis and engineering is considered most useful. Specific NASA technology developments, which were included in the study are: (1) a capacitive detector; (2) stereoscopic vision system; (3) improved crash sensors; (4) the use of the acoustic signature of the crash to determine crash severity; and (5) the use of radar antenna for pre-crash sensing. Information relating to injury risk assessment is included, as is a summary of the areas of the technology which requires further development

Mortality associated with delays between clinic entry and ART initiation in resource-limited settings: results of a transition-state model.

OBJECTIVE: To estimate the mortality impact of delay in antiretroviral therapy (ART) initiation from the time of entry into care. DESIGN: A state-transition Markov process model. This technique allows for assessing mortality before and after ART initiation associated with delays in ART initiation among a general population of ART-eligible patients without conducting a randomized trial. METHODS: We used patient-level data from 3 South African cohorts to determine transition probabilities for pre-ART CD4 count changes and pre-ART and on-ART mortality. For each parameter, we generated probabilities and distributions for Monte Carlo simulations with 1-week cycles to estimate mortality 52 weeks from clinic entry. RESULTS: We estimated an increase in mortality from 11.0% to 14.7% (relative increase of 34%) with a 10-week delay in ART for patients entering care with our pre-ART cohort CD4 distribution. When we examined low CD4 ranges, the relative increase in mortality delays remained similar; however, the absolute increase in mortality rose. For example, among patients entering with CD4 count 50-99 cells per cubic millimeter, 12-month mortality increased from 13.3% with no delay compared with 17.0% with a 10-week delay and 22.9% with a 6-month delay. CONCLUSIONS: Delays in ART initiation, common in routine HIV programs, can lead to important increases in mortality. Prompt ART initiation for patients entering clinical care and eligible for ART, especially those with lower CD4 counts, could be a relatively low-cost approach with a potential marked impact on mortality

Proteoglycan Breakdown of Meniscal Explants Following Dynamic Compression Using a Novel Bioreactor

Motivated by our interest in examining meniscal mechanotransduction processes, we report on the validation of a new tissue engineering bioreactor. This paper describes the design and performance capabilities of a tissue engineering bioreactor for cyclic compression of meniscal explants. We showed that the system maintains a tissue culture environment equivalent to that provided by conventional incubators and that its strain output was uniform and reproducible. The system incorporates a linear actuator and load cell aligned together in a frame that is contained within an incubator and allows for large loads and small displacements. A plunger with six Teflon-filled Delrin compression rods is attached to the actuator compressing up to six tissue explants simultaneously and with even pressure. The bioreactor system was used to study proteoglycan (PG) breakdown in porcine meniscal explants following various input loading tests (0–20% strain, 0–0.1 MPa). The greatest PG breakdown was measured following 20% compressive strain. These strain and stress levels have been shown to correspond to partial meniscectomy. Thus, these data suggest that removing 30–60% of meniscal tissue will result in the breakdown of meniscal tissue proteoglycans