The Estimation of Food Sources for Macroinvertebrates as Stenopsyche marmorata in Natory Stream by Fatty Acid

n/

Anatomic variations of the T2 nerve root (including the nerve of Kuntz) and their implications for sympathectomy

AbstractObjective: The aim of this study was to clarify the anatomic variations of the intrathoracic nerve of Kuntz, and this should help delineate the resection margins during video-assisted thoracic sympathectomy. Methods: Sixty-six thoracic sympathetic chains of 39 adult Korean cadavers were dissected on both sides of the thorax in 27 cadavers (54 sides) and on one side in 12 cadavers (12 sides). Results: The intrathoracic nerve was observed in 45 (68.2%) sides and was present bilaterally in 48.1% of cadavers. No intrathoracic nerve or ascending ramus communicans arising from the second thoracic nerve was observed in only 5 (7.6%) sides. The diameter of the intrathoracic nerve was 1.25 ± 0.55 mm on average. The arising point of the intrathoracic nerve from the second thoracic nerve was 7.3 mm on average from the sympathetic trunk. Presence of the stellate ganglion was noted in 56 (84.8%) sides, and 6 (9.1%) sides showed a single large ganglion formed by the stellate and the second thoracic sympathetic ganglia. The second thoracic sympathetic ganglion was most commonly located (50%) in the second intercostal space. Conclusion: The anatomic variations of the intrathoracic nerve of Kuntz and the second thoracic sympathetic ganglion were characterized in human cadavers. It is hoped that this study will help to improve the recurrence of symptoms caused by the intrathoracic nerve in an upper thoracic sympathectomy for hyperhidrosis.J Thorac Cardiovasc Surg 2002;123:498-50

Tip-Enhanced Raman Scattering Imaging of Two-Dimensional Tungsten Disulfide with Optimized Tip Fabrication Process

We successfully achieve the tip-enhanced nano Raman scattering images of a tungsten disulfide monolayer with optimizing a fabrication method of gold nanotip by controlling the concentration of etchant in an electrochemical etching process. By applying a square-wave voltage supplied from an arbitrary waveform generator to a gold wire, which is immersed in a hydrochloric acid solution diluted with ethanol at various ratios, we find that both the conical angle and radius of curvature of the tip apex can be varied by changing the ratio of hydrochloric acid and ethanol. We also suggest a model to explain the origin of these variations in the tip shape. From the systematic study, we find an optimal condition for achieving the yield of similar to 60% with the radius of similar to 34 nm and the cone angle of similar to 35 degrees. Using representative tips fabricated under the optimal etching condition, we demonstrate the tip-enhanced Raman scattering experiment of tungsten disulfide monolayer grown by a chemical vapor deposition method with a spatial resolution of similar to 40 nm and a Raman enhancement factor of similar to 4,760. © The Author(s) 2017

Flow Analysis of Underwater Water Jet System Using Computational Fluid Dynamics and Particle Image Velocimetry

The width and depth of excavation are important for the development of a water jet system for underwater surface excavation in the water. This is determined by the pressure distribution affecting the ground. Therefore, it is necessary to analyze the flow of the water jet, but it is difficult to grasp visually, and generally used sensors are difficult to use in water. To overcome this problem, the flow analysis was simulated by using Computational Fluid Dynamics(CFD), Particle Image Velocimetry(PIV) experiment was performed to confirm the accuracy of CFD and to visualize the nozzle flow. The CFD was simulated by using MIDAS NFX and various pressures of nozzle injection, velocity distribution and pressure distribution were analyzed. For the PIV experiment, the water jet system is installed at L22m x W3.5m x D3m water tank, and a 5W Nd-yag laser was installed at the surface of the water, and a high-speed camera was installed to capture the flow in the side observation field. And particles of 20 micrometer size were mixed in the water. In the results of the CFD simulations, the nozzle injection pressure which is the measurable velocity by the PIV system was selected, the nozzle flow was visualized and the velocity distribution was measured by using the PIV experiment. The velocity distribution measured by PIV is compared with the CFD - analyzed velocity distribution under the same conditions

The Basic Study of Underwater Robot Control for Over Actuated Systems

In general, only six individual thrusters are required to perform 6 DOF (Degree Of Freedom) motion. Sometimes, however, more than six thrusters are used for 6 DOF motion for a variety of purposes. The over actuated systems can transit quickly from transient state caused by disturbance to steady state through the over actuated input. So in the underwater robot, the purpose of over actuated system is mainly used to maintain stable motion and position. And that systems are performed to obtain the optimal efficiency through the thruster force distribution. In this paper, we designed and fabrication the ROV (Remotely Operated Vehicle) for the basic study of over actuated underwater robot. It has 4 horizontal thrusters and 4 vertical thrusters. Using this system, we derived the thruster force distribution matrix for thruster allocation. Also, to check the kinetic characteristics of over actuated underwater robot before applying various controller, we performed the basic motion performance test and motion control test using the PD controller in the indoor engineering water basin

Analysis of the Correlation Between the Support Performance of Supported Business for the Regional Industry

Reflecting the conditions and characteristics of Korea, the region's main industry is being developed to expand new job creation in the region and enhance the competitiveness of local industries. The local main business is supported to 63 main industries selected by region. The main industries in Busan include digital contents, intelligent machine parts, super precision convergence parts, mold heat treatment, and bio-health. In this study, the main industries of Busan region in 2016 conducted an analysis on the companies that support the intelligent machine parts industry. For the analysis, we collected data on the sales of supported companies, sales after business support, and employment growth. The analysis tool utilized IBM SPSS statistics 18. As a result, we confirmed the relationship between employment and sales according to support business programs. Based on the results of this study, it will be helpful for the task performing organization to identify the direction of the support program and the needs of the enterprise

Time Series Analysis of Outcomes for Small and Medium Enterprises’ Support of Regional Industry

Continued investment in Research and Development (R&D) by the government and corporate support played a major role in the rapid growth of the Republic of Korea. In 2017, the amount of R&D investment by the government accounted for 19.7 trillion Won (KRW), which is 4.7 % of the government’s budget. The government’s R&D budget is increasing by 2.5 % each year. We analyzed the outcomes of the projects, supported by the Busan regional companies conducted in 2016 to 2017. For a time series analysis, we gathered companies support amount by year, sales after company support, and material for employment. We used IBM’s Statistical Package for the Social Sciences (SPSS) 18 for correlation analysis. We confirmed the relationship between employment and the sales of the annual company support program

A Case of Crohn's Disease with Improvement after Azathioprine-Induced Pancytopenia

The immunosuppressant azathioprine (AZA) is widely used in the treatment of inflammatory bowel disease (IBD) for both inducing and maintaining remission. However, the adverse effects of AZA can often necessitate a dose reduction or discontinuation. Bone marrow suppression is one of the most serious complications with AZA treatment. On the other hand, some reports have suggested that neutropenia during AZA therapy reduced the relapse rates of IBD patients, and there have been some cases where eradication of the sensitized leukocytes by leukapheresis or bone marrow transplantation improved the IBD, which may explain the relevant role of neutropenia in controlling disease activity. This report describes the case of a 22-year-old male patient who had Crohn's colitis and complicated perianal fistulas that required immunosuppression; he achieved endoscopically determined remission and showed accelerated mucosal healing as well as clinical remission following the AZA-induced pancytopenia