Measurements of the effect of horizontal variability of atmospheric backscatter on dial measurements

The horizontal variability of atmospheric backscatter may have a substantial effect on how Differential Absorption Lidar (DIAL) data must be taken and analyzed. To minimize errors, lidar pulse pairs are taken with time separations which are short compared to the time scales associated with variations in atmospheric backscatter. To assess the atmospheric variability for time scales which are long compared to the lidar pulse repetition rate, the variance of the lidar return signal in a given channel can be computed. The variances of the on-line, off-line, and ration of the on-line to off-line signals at given altitudes obtained with the dual solid-state Alexandrite laser system were calculated. These evaluations were made for both down-looking aircraft and up-looking ground-based lidar data. Data were taken with 200 microsecond separation between on-line and off-line laser pulses, 30 m altitude resolution, 5 Hz repetition rate, and the signal were normalized for outgoing laser energy

Real-time atmospheric absorption spectra for in-flight tuning of an airborne dial system

Real-time measurements of atmospheric absorption spectra are displayed and used to precisely calibrate and fix the frequency of an Alexandrite laser to specific oxygen absorption features for airborne Differential Absorption Lidar (DIAL) measurements of atmospheric pressure and temperature. The DIAL system used contains two narrowband tunable Alexandrite lasers: one is electronically scanned to tune to oxygen absorption features for on-line signals while the second is used to obtain off-line (nonabsorbed) atmospheric return signals. The lidar operator may select the number of shots to be averaged, the altitude, and altitude interval over which the signals are averaged using single key stroke commands. The operator also determines exactly which oxygen absorption lines are scanned by comparing the line spacings and relative strengths with known line parameters, thus calibrating the laser wavelength readout. The system was used successfully to measure the atmospheric pressure profile on the first flights of this lidar, November 20, and December 9, 1985, aboard the NASA Wallops Electra aircraft

Airborne Lidar measurements of the atmospheric pressure profile with tunable Alexandrite lasers

The first remote measurements of the atmospheric pressure profile made from an airborne platform are described. The measurements utilize a differential absorption lidar and tunable solid state Alexandrite lasers. The pressure measurement technique uses a high resolution oxygen A band where the absorption is highly pressure sensitive due to collision broadening. Absorption troughs and regions of minimum absorption were used between pairs of stongly absorption lines for these measurements. The trough technique allows the measurement to be greatly desensitized to the effects of laser frequency instabilities. The lidar system was set up to measure pressure with the on-line laser tuned to the absorption trough at 13147.3/cm and with the reference laser tuned to a nonabsorbing frequency near 13170.0/cm. The lidar signal returns were sampled with a 200 range gate (30 vertical resoltion) and averaged over 100 shots

Near-Threshold eta Meson Production in Proton-Proton Collisions

The production of eta mesons has been measured in the proton-proton interaction close to the reaction threshold using the COSY-11 internal facility at the cooler synchrotron COSY. Total cross sections were determined for eight different excess energies in the range from 0.5 MeV to 5.4 MeV. The energy dependence of the total cross section is well described by the available phase-space volume weighted by FSI factors for the proton-proton and proton-eta pairs.Comment: 9 pages, 1 table, 5 figure

Influence of the Characteristics of the STM-tip on the Electroluminescence Spectra

We analyze the influence of the characteristics of the STM-tip (applied voltage, tip radius) on the electroluminescence spectra from an STM-tip-induced quantum dot taking into account the many-body effects. We find that positions of electroluminescence peaks, attributed to the electron-hole recombination in the quantum dot, are very sensitive to the shape and size of the confinement potential as determined by the tip radius and the applied voltage. A critical value of the tip radius is found, at which the luminescence peak positions as a function of the tip radius manifest a transition from decreasing behavior for smaller radii to increasing behavior for larger radii. We find that this critical value of the tip radius is related to the confinement in the lateral and normal direction.Comment: 15 pages, 5 figure

From lean production to Industrie 4.0: More autonomy for employees?

The article examines the relationship between lean production and Industrie 4.0 focusing on the question of autonomy in the work process. In contrast to the claim made by official Industrie 4.0 concepts that the autonomy of the employees would increase, we see in the current implementation projects a tendency towards greater standardization and control of work. This is in continuity with concepts of lean production, but neglects the participation-oriented elements of lean production such as teamwork and shop-floor-based improvement activities. Our argument is developed by analyzing practical examples from three relevant fields (digital assistance systems, data-based process management, modular assembly). The conclusions of this article also discuss the extent to which the concept of individual autonomy is suitable for the assessment of Industrie 4.0 concepts, given the high levels of interdependence already achieved in production processes

Gaelic Language Plan Implementation Assessment Cycle 6 : Final Report to Bòrd na Gàidhlig

The Gaelic Language Plans (GLPs) of fourteen public organisations were analysed by a group of impartial researchers from UWS, GCU, Heriot Watt, and Iaith. This exercise was Cycle 6 in a series of GLP assessments. Each GLP was textually analysed to list all core commitments and targets set in the areas of Status, Corpus, Acquisition and Usage planning. Fidelity assessments then took place of these commitments/targets using FOI requests, ‘secret shopping’, interview and a survey that included employees and staff. Each organisation was provided a comprehensive assessment report for the implementation of their GLP, culminating in recommendations to them and to the Bòrd. This report provides a summary report for Cycle 6’s assessments. It provides some reference to individual organisations implementation efforts, but for detailed information relating to individual organisations, individual reports should be consulted. This summary report highlights transversal issues arising from the assessment process

Monitoring of the accelerator beam distributions for internal target facilities

We describe a direct method for monitoring the geometrical dimensions of a synchrotron beam at the target position for internal target installations. The method allows for the observation of the proton beam size as well as the position of the beam relative to the target. As a first demonstration of the technique, we present results obtained by means of the COSY-11 detection system installed at the cooler synchrotron COSY. The influence of the stochastic cooling on the COSY proton beam dimensions is also investigated.Comment: 7 pages, 8 figures, Submitted to Nucl. Inst. & Meth.

New results on the pd --> 3He eta production near threshold

Measurements on the eta meson production in proton-deuteron collisions have been performed using the COSY-11 facility at COSY Juelich. Here we present preliminary results on total and differential cross sections for the pd --> 3He eta reaction at five excess energies between Q = 5.1 and Q = 40.6 MeV. The obtained angular distributions for the emitted eta mesons in the center of mass system expose a transition from an almost isotropic emission to a highly anisotropic distribution. The extracted total cross sections support a strong eta-3He final state interaction and will be compared with model predictions.Comment: Presented at MESON 2004: 8th International Workshop on Meson Production, Properties and Interactions, Cracow, Poland, 4-8 Jun 2004, 3 pages, Submitted to Int. J. Mod. Phys.

Drift chamber with a c-shaped frame

We present the construction of a planar drift chamber with wires stretched between two arms of a c-shaped aluminium frame. The special shape of the frame allows to extendthe momentum acceptance of the COSY-11 detection system towards lower momenta without suppressing the high momentum particles. The proposed design allows for construction of tracking detectors covering small angles with respect to the beam, which can be installed and removed without dismounting the beam-pipe. For a three-dimensional track reconstruction a computer code was developed using a simple algorithm of hit preselection.Comment: submitted to Nucl. Instr. & Meth