Vortex flow generator utilizing synthetic jets by diaphragm vibration

This paper develops a millimeter scale fully packaged device in which a vortex flow of high velocity is generated inside a chamber. Under the actuation by a lead zirconate titanate (PZT) diaphragm, a flow circulates with increasing velocity after each actuating circle to form a vortex in a cavity named as the vortex chamber. At each cycle, the vibration of the PZT diaphragm creates a small net air flow through a rectifying nozzle, generates a synthetic jet which propagates by a gradual circulation toward the vortex chamber and then backward the feedback chamber. The design of such device is firstly conducted by a numerical analysis whose results are considered as the base of our experimental set-up. A vortex flow generated in the votex chamber was observed by a high-speed camera. The present approach which was illustrated by both the simulation and experiment is potential in various applications related to the inertial sensing, fluidic amplifier and micro/nano particle trapping and mixing

The context of school-based cyberbullying prevention in Vietnamese public schools: A cross-sectional study

Cyberbullying is a form of violence that has been present in schools for a long time and negatively impacts the mental health of students. Different countries have different strategies for avoiding cyberbullying. However, research on school-based cyberbullying prevention is limited in Southeast Asian developing countries.  This study aims to explore the current implementation of school-based cyberbullying prevention in public schools in a developing country. The framework of prevention programs is based on three aspects: (1) Developing curricula on how to behave when being a victim of cyberbullying.  (2) Strengthening the students' skills to deal with cyberbullying. (3) Promulgating specific provisions in the legal document on handling cyberbullying. School-based cyberbullying prevention among students in public schools is currently a research gap because of the limitations in the management of students using the internet and educational policies. This is a cross-sectional study that surveyed 400 participants who are Vietnamese teachers, administrators and school psychologists. The results show that the limitations of school-based cyberbullying prevention for Vietnamese students include professional knowledge, practical experience and personnel in charge of this work.  This constraint has resulted in an upsurge in incidents of cyberbullying in Vietnam. The findings add to the important evidence on cyberbullying prevention in a developing country that is working to research and develop an appropriate school-based cyberbullying prevention strategy

A study of ion wind generator using parallel arranged electrode configuration for centrifugal flow mixer

Ion wind is recently applied in various research areas such as the biomedical engineering, microfluidic mixing and particle manipulation. In this work, a bipolar ion wind generator configured by parallel arranged electrodes is used for centrifugal mixing applications. With the proposed configuration, negative and positive ion winds are simultaneously generated, mixed and then neutralized by each other while travelling toward liquid surface. The efficiency of the device was investigated both computationally and experimentally. The mixing of liquid occurred in different ways when the system is activated by either direct or alternating currents. Furthermore, the mixing is dependent on the dimension of electrode tip

Corona based air-flow using parallel discharge electrodes

A novel air-flow generator based on the effect of ion wind has been developed by the simultaneous generation of both positive and negative ions using two electrodes of opposite polarity placed in parallel. Unlike the conventional unipolar-generators, this bipolar configuration creates an ion wind, which moves away from both electrodes and yields a very low net charge on the device. The electro-hydrodynamic behavior of air-flow has been experimentally and numerically studied. The velocity of ion wind reaches values up to 1.25 m/s using low discharge current 5 mu-A with the kinetic conversion efficiency of 0.65% and the released net charge of �30 fA, 8 orders of magnitude smaller compared with the discharge current. Due to easy scalability and low net charge, the present configuration is beneficial to applications with space constraints and/or where neutralized discharge process is required, such as inertial fluidic units, circulatory flow heat transfer, electrospun polymer nanofiber to overcome the intrinsically instability of the process, or the formation of low charged aerosol

A closed device to generate vortex flow using PZT

This paper reports for the first time a millimeter scale fully packaged device which generates a vortex flow of high velocity. The flow which is simply actuated by a PZT diaphragm circulates with a higher velocity after each actuating circle to form a vortex in a desired chamber. The design of such device is firstly conducted by a numerical analysis using OpenFOAM. Several numerical results are considered as the base of our experiment where a flow vortex is observed by a high speed camera. The present device is potential in various applications related to the inertial sensing, fluidic amplifier and micro/nano particle trapping and mixing

Tri-axis convective accelerometer with closed-loop heat source

In this paper, we report the details and findings of a study on tri-axis convective accelerometer, which is designed with the closed-loop type heat source and thermal sensing hotwire elements. The closed-loopheat source enhances the convective flow to the central part where a hotwire is placed to measure the vertical component of acceleration. The simulation was conducted using numerical analysis, and the devicewas prototyped by additive manufacturing. The device, functioning as a tilt sensor and an accelerometer,was tested up to acceleration of 20 g. The experiments were successfully conducted and the experimental results agreed reasonably with those obtained by numerical analysis. The results demonstrated that the closed-loop heat source could reduce the cross effect between the acceleration components. The scalefactor and cross-sensitivity had the values of 0.26 micro�V/g and 1.2%, respectively. The cross-sensitivity andthe effects of heating power were also investigated in this study

Fluidic mechanism for dual-axis gyroscope

In this paper, we report a further study of flow-network generating four jet flows which circulate in a sealed device to experimentally investigate the feasibility and efficiency of a dual-axis gyroscope. The experiment is carried out successfully and the experimental results reasonably agreed with those obtained by numerical analysis using OpenFOAM. The flow rectifying coefficient is determined using the mathematical lump model for a vibrating system, which takes into account of the device geometry and resonant frequency. Experimental and numerical results demonstrate that the coefficient of the new system developed in this study is significantly higher than those of conventional designs. The hotwire-integrated device which can function as a dual-axis gyroscope is tested using a turntable with speeds up to 1900 rpm. The scale factor and cross-sensitivity of the system are 0.26 microV s/o and 1.2%, respectively. The cross-sensitivity and the effects of linear acceleration, actuating voltage on the diaphragm, heating power and position of hotwires are also investigated

Estimating Water Content and Grain Size of Intertidal Flat Sediments Using Visible to Shortwave-Infrared Reflectance and Sentinel 2A Data: A Case Study of the Red River Delta, Vietnam

Sediment properties such as water content (WC) and grain size (GS) are essential to characterize the environmental conditions of tidal flats. This article aimed to develop appropriate models to estimate the WC and GS of surface sediments for an intertidal flat on the Red river delta (Vietnam) using Sentinel 2A (S2A) images. The spectral reflectance, WC, and GS of 96 sub-samples from 12 sediment samples collected on December 17, 2017 were measured to clarify their relationships. The WC was highly correlated with the reflectance ratio of two shortwave-infrared bands, R(2190)/R(1610) (R² = 0.93). The median GS (D₅₀) at 0%, 15%, and 20% of WC was significantly correlated with the reflectance ratio of the near-infrared band (842 nm) versus the visible-green band (560 nm) (R² > 0.78). Next, D₅₀ was estimated from a multivariate regression model using this band ratio, the visible-red band (665 nm), and WC. The accuracy of the models was verified by comparisons with WC and D₅₀ from 20 samples collected on March 12th 2019 (RMSE of both WC and D₅₀ 30%) in very fine sediments (silts), which is consistent with other intertidal flats with similar sediment types. This article was limited to fine sediment samples. Therefore, our next step is to incorporate coarse sediments into the models to provide more universal mapping of WC and sediment types

A circulatory ionic wind for inertial sensing application

A novel gyroscope using circulatory electro-hydrodynamics flow in a confined space is presented for the first time. The configuration of the new gyroscope includes three point-ring corona discharge actuators that generate ion flows in three separated sub-channels. The three ion flows then merge together when going through a nozzle of the main chamber entrance and create a jet flow. In the new configuration, the residual charge of ion wind flow is removed by a master-ring electrode located at one end of the main chamber. Under the effect of the angular speed of gyroscope, the jet flow is deflected and this deflection is sensed using hotwires. The results, which are consistently acquired by both the numerical simulation and experiment on our prototypes, demonstrate the repeatability and stability of the new approach. Since the ion wind can be generated by a minimum power, the present configuration-based device does not require any vibrating component. Thus, the device is robust, cost, and energy-effective

Dual-pin electrohydrodynamic generator driven by alternating current

We report a unique alternating current (AC) driven corona based air-flow generator using symmetrically arranged electrodes. Unlike the conventional configuration where one electrode generates charged ions moving towards the reference electrode, this configuration allows both negative and positive charges to simultaneously move away from the device and generate ion wind in parallel with the electrodes. In comparison with the direct current (DC) driven corona generator, the time oscillating AC field allows the device a better stabilization owing to the independence of ion wind strength from the inter-electrode spacing. Our results by both simulation and experiment showed that when the AC frequency exceeds a threshold value of 1100 Hz, the electric field at the electrode tips is determined dominantly by the charge cloud created in the previous half-cycle, resulting in stronger net electric field and thus stronger ion wind. In addition, the electrode separation in the AC driven corona based generator is less critical above the frequency threshold, yielding a more robust design with minimized susceptibility to manufacturing tolerances and impurities on the electrodes. Moreover, lower voltage levels of the AC driven system allow simpler and more economical design in the high voltage circuit of the AC generator