In this paper, we report the details and findings of a study on tri-axis convective accelerometer, which is designed with the closed-loop type heat source and thermal sensing hotwire elements. The closed-loopheat source enhances the convective flow to the central part where a hotwire is placed to measure the vertical component of acceleration. The simulation was conducted using numerical analysis, and the devicewas prototyped by additive manufacturing. The device, functioning as a tilt sensor and an accelerometer,was tested up to acceleration of 20 g. The experiments were successfully conducted and the experimental results agreed reasonably with those obtained by numerical analysis. The results demonstrated that the closed-loop heat source could reduce the cross effect between the acceleration components. The scalefactor and cross-sensitivity had the values of 0.26 microοΏ½V/g and 1.2%, respectively. The cross-sensitivity andthe effects of heating power were also investigated in this study
