4,224 research outputs found
Recommended from our members
Understanding individuals’ decisions about vaccination: a comparison between Expected Utility and Regret Theory models
Accelerator measurement of the energy spectra of neutrons emitted in the interaction of 3-GeV protons with several elements
The application of time of flight techniques for determining the shapes of the energy spectra of neutrons between 20 and 400 MeV is discussed. The neutrons are emitted at 20, 34, and 90 degrees in the bombardment of targets by 3 GeV protons. The targets used are carbon, aluminum, cobalt, and platinum with cylindrical cross section. Targets being bombarded are located in the internal circulating beam of a particle accelerator
Data augmentation and semi-supervised learning for deep neural networks-based text classifier
User feedback is essential for understanding user needs. In this paper, we use free-text obtained from a survey on sleep-related issues to build a deep neural networks-based text classifier. However, to train the deep neural networks model, a lot of labelled data is needed. To reduce manual data labelling, we propose a method which is a combination of data augmentation and pseudo-labelling: data augmentation is applied to labelled data to increase the size of the initial train set and then the trained model is used to annotate unlabelled data with pseudo-labels. The result shows that the model with the data augmentation achieves macro-averaged f1 score of 65.2% while using 4,300 training data, whereas the model without data augmentation achieves macro-averaged f1 score of 68.2% with around 14,000 training data. Furthermore, with the combination of pseudo-labelling, the model achieves macro-averaged f1 score of 62.7% with only using 1,400 training data with labels. In other words, with the proposed method we can reduce the amount of labelled data for training while achieving relatively good performance
Blood lactate clearance after maximal exercise depends on active recovery intensity
AIM: High-intensity exercise is time-limited by onset of fatigue, marked by accumulation of blood lactate. This is accentuated at maximal, all-out exercise that rapidly accumulates high blood lactate. The optimal active recovery intensity for clearing lactate after such maximal, all-out exercise remains unknown. Thus, we studied the intensity-dependence of lactate clearance during active recovery after maximal exercise.<p></p>
METHODS: We constructed a standardized maximal, all-out treadmill exercise protocol that predictably lead to voluntary exhaustion and blood lactate concentration >10 mM. Next, subjects ran series of all-out bouts that increased blood lactate concentration to 11.5±0.2 mM, followed by recovery exercises ranging 0% (passive)-100% of the lactate threshold.<p></p>
RESULTS: Repeated measurements showed faster lactate clearance during active versus passive recovery (P<0.01), and that active recovery at 60-100% of lactate threshold was more efficient for lactate clearance than lower intensity recovery (P<0.05). Active recovery at 80% of lactate threshold had the highest rate of and shortest time constant for lactate clearance (P<0.05), whereas the response during the other intensities was graded (100%=60%>40%>passive recovery, P<0.05).<p></p>
CONCLUSION: Active recovery after maximal all-out exercise clears accumulated blood lactate faster than passive recovery in an intensity-dependent manner, with maximum clearance occurring at active recovery of 80% of lactate threshold
Field comparison of the point velocity probe with other groundwater velocity measurement methods
Field testing of a new tool for measuring groundwater velocities at the centimeter scale, the point velocity probe (PVP), was undertaken at Canadian Forces Base, Borden, Ontario, Canada. The measurements were performed in a sheet pile-bounded alleyway in which bulk flow rate and direction could be controlled. PVP velocities were compared with those estimated from bulk flow, a Geoflo® instrument, borehole dilution, colloidal borescope measurements, and a forced gradient tracer test. In addition, the velocity profiles were compared with vertical variations in hydraulic conductivity (K) measured by permeameter testing of core samples and in situ high-resolution slug tests. There was qualitative agreement between the trends in velocity and K among all the various methods. The PVP and Geoflo® meter tests returned average velocity magnitudes of 30.2 ± 7.7 to 34.7 ± 13.1 cm/d (depending on prior knowledge of flow direction in PVP tests) and 36.5 ± 10.6, respectively, which were near the estimated bulk velocity (20 cm/d). The other direct velocity measurement techniques yielded velocity estimates 5 to 12 times the bulk velocity. Best results with the PVP instrument were obtained by jetting the instrument into place, though this method may have introduced a slight positive bias to the measured velocities. The individual estimates of point velocity direction varied, but the average of the point velocity directions agreed quite well with the expected bulk flow direction. It was concluded that the PVP method is a viable technique for use in the field, where high-resolution velocity data are required.The NSERC/Motorola/ETI Industrial Research Chair in Groundwater Remediation, NSERC, CRESTech, the National Council for Scientific Research of Lebanon (NCSR), OGSST, and NSF under grant 0134545 are acknowledged for funding this work. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation. Carl McElwee performed the high-definition slug tests; Peter Kearl performed the colloidal borescope measurements; and Bob Ingleton, Paul Johnson, and Greg Friday assisted with probe construction and field installatio
Paper Session II-A - The Testability of Software for the Space Station Freedom Program
The Space Station Freedom Data Management System consists of state-of-the-art hardware and software technology that exceeds the capabilities of earlier test tools and methods used to verify and certify man-rated space systems. New technologies and techniques are being developed to meet these challenges
Mapping the CMB II: the second flight of the QMAP experiment
We report the results from the second flight of QMAP, an experiment to map
the cosmic microwave background near the North Celestial Pole. We present maps
of the sky at 31 and 42 GHz as well as a measurement of the angular power
spectrum covering the l-range 40-200. Anisotropy is detected at about 20 sigma
and is in agreement with previous results at these angular scales. We also
report details of the data reduction and analysis techniques which were used
for both flights of QMAP.Comment: 4 pages, with 5 figures included. Submitted to ApJL. Window functions
and color figures are available at
http://pupgg.princeton.edu/~cmb/welcome.htm
Comparison and Analysis of Flexibility for Cutlery Made from Biobased/ Biodegradable and Petrochemical Materials
Biorenewable plastics can have the potential to reduce pollution, demand on landfills, and dependence on foreign petroleum caused by petroleum-based plastics. To determine the performance of biobased utensils compared to petrochemical based utensils, this study investigated 13 bio-based/biorenewable utensils and six petrochemical utensils in terms of weight, stiffness, and specific stiffness (stiffness/weight ratio). The Commercial Item Description (CID), which was created by the U.S. Government via the General Services Administration (GSA), is the current standard for testing utensils. The biobased products selected for this study were “commercial or industrial products (other than food or feed) that are composed, in whole, or in significant part, of biological products, renewable agricultural materials (including plant, animal, and marine materials), or forestry materials.” (USDA Bio Preferred Program, 2012). The results of this study show that the majority of biobased products exhibited similar strength and deflection under a given load as petrochemical products. This is the first comparison of this kind and it will allow designers and manufacturers to further optimize their products
- …