Cell adhesion evaluation of laser-sintered HAp and 45S5 bioactive glass coatings on micro-textured zirconia surfaces using MC3T3-E1 osteoblast-like cells

Laser texturing is a technique that has been increasingly explored for the surface modification of several materials on different applications. Laser texturing can be combined with conventional coating techniques to functionalize surfaces with bioactive properties, stimulating cell differentiation and adhesion. This study focuses on the cell adhesion of laser-sintered coatings of hydroxyapatite (HAp) and 45S5 bioactive glass (45S5 BG) on zirconia textured surfaces using MC3T3-E1 cells. For this purpose, zirconia surfaces were micro-textured via laser and then coated with HAp and 45S5 BG glass via dip coating. Afterwards, the bioactive coatings were laser sintered, and a reference group of samples was conventionally sintering. The cell adhesion characterisation was achieved by cell viability performing live/dead analysis using fluorescence stains and by SEM observations for a qualitative analysis of cell adhesion. The in vitro results showed that a squared textured pattern with 100μm width grooves functionalized with a bioactive coating presented an increase of 90% of cell viability compared to flat surfaces after 48h of incubation. The functionalized laser sintered coatings do not present significant differences in cell viability when compared to conventionally sintered coatings. Therefore, the results reveal that laser sintering of HAp and 45S5 BG coatings is a fast and attractive coating technique.publishe

Structure optimisation and biological evaluation of bone scaffolds prepared by co-sintering of silicate and phosphate glasses

A degradable phosphate glass (ICEL) and a bioactive silicate glass (CEL2) were mixed in different ratios (wt-%: 100%ICEL, 70%ICEL-30%CEL2, 30%ICEL-70%CEL2, 100%CEL2; codes 100-0, 70-30, 30-70, 0-100) and then co-sintered to obtain three-dimensional porous scaffolds by gel casting foaming. Thermal analyses were carried out on the glass mixtures and were used as a starting point for the optimisation of the scaffold sintering treatment. The microcomputed tomography and field emission scanning electron microscope analyses allowed the selection of the optimal sintering temperature to obtain an adequate structure in terms of total and open porosity. The scaffolds showed an increasing solubility with increasing ICEL glass content, and for 30-70 and 0-100, the precipitation of hydroxyapatite in simulated body fluid was observed. In vitro tests indicated that all the scaffolds showed no cytotoxic effect. The co-sintering of silicate and phosphate glasses showed to be a promising strategy to tailor the scaffold osteoconductivity, degradation and bioactivit

Avaliação da qualidade de vida, da dor nas costas, da funcionalidade e de alterações da coluna vertebral de estudantes de fisioterapia

O objetivo deste estudo foi avaliar a qualidade de vida, dor nas costas, funcionalidade e as alterações da coluna vertebral de estudantes de fisioterapia. Participaram 42 universitários, sendo avaliada a coluna vertebral por meio do arcômetro, a dor nas costas por meio de um questionário multidimensional de dor, a qualidade de vida por meio do questionário SF-36 e funcionalidade a partir do Roland-Morris. Foi realizada estatística descritiva e teste qui-quadrado (α=0,05). Os resultados demonstraram: prevalência de alterações nas curvaturas da coluna vertebral de 38,1%; (n=16); alta prevalência de dor nas costas (69%; n=29); baixa prevalência de comprometimento da funcionalidade (3,4%; n=1); que não há associação entre as alterações nas curvaturas da coluna vertebral e funcionalidade e dor nas costas; e que os escores dos domínios do SF-36 foram maiores que 45, exceto o domínio "dor", cujo escore aproximado foi de 35. Conclui-se que quanto menor os níveis de intensidade da dor melhor o nível de qualidade de vida

Initial studies on the cytotoxicity of ceramics prepared from dry discharge incinerator bottom ash dust

The dust generated from a dry discharge ash handling system at a waste to energy (WtE) facility has been processed and sintered to produce ceramic samples. Preliminary cell culture studies have been completed to assess the potential cytotoxicity of the IBA ceramics prepared from dry discharge dust. The tests have used mouse embryonic fibroblast (MEF) cells. Results indicate inhibition of cell adhesion by the IBA ceramic surface. However the samples were covered by cells and these expressed similar behaviour in the context of morphology and vitality to control cells on glass samples. The work demonstrates that fine IBA dust from dry discharge systems can be formed into ceramics and that biocompatibility testing has an important role in defining potential suitability for use of these types of waste-derived ceramics

A novel VWF variant associated with type 2 von Willebrand disease in German Wirehaired Pointers and German Shorthaired Pointers

Von Willebrand disease (VWD), caused by deficiency of the von Willebrand factor (VWF), is the most common bleeding disorder in humans and dogs. The complete cDNA encoding VWF of a German Wirehaired Pointer with type 2 VWD was sequenced, and we found four variants that alter the amino acid sequence. These variants were: c.1657T>G corresponding to p.Trp553Gly; c.1777G>A (p.Glu593Lys); c.4937A>G (p.Asn1646Ser) and c.5544G>A (p.Met1848Ile). A haplotype of the c.1657G, c.1777A and c.4937G alleles co-segregated with the VWF antigen level in a four-generation pedigree with the disease. Healthy dogs of the breed were found that were homozygous for the c.1777A or the c.5544A allele, indicating that these variants do not cause VWD. Dogs that were homozygous for the c.4937G allele and had no signs of a bleeding disorder were observed in the Chinese Crested dog breed. Thus, only the c.1657G variant was found in the homozygous state exclusively in VWD affecteds, and this variant is the strongest candidate to be the cause of VWD type 2 in the German Wirehaired Pointer breed. A screen of German Shorthaired Pointers indicated that the variant also segregates with VWD in this breed

A novel VWF variant associated with type 2 von Willebrand disease in German Wirehaired Pointers and German Shorthaired Pointers

Von Willebrand disease (VWD), caused by deficiency of the von Willebrand factor (VWF), is the most common bleeding disorder in humans and dogs. The complete cDNA encoding VWF of a German Wirehaired Pointer with type 2 VWD was sequenced, and we found four variants that alter the amino acid sequence. These variants were: c.1657T>G corresponding to p.Trp553Gly; c.1777G>A (p.Glu593Lys); c.4937A>G (p.Asn1646Ser) and c.5544G>A (p.Met1848Ile). A haplotype of the c.1657G, c.1777A and c.4937G alleles co-segregated with the VWF antigen level in a four-generation pedigree with the disease. Healthy dogs of the breed were found that were homozygous for the c.1777A or the c.5544A allele, indicating that these variants do not cause VWD. Dogs that were homozygous for the c.4937G allele and had no signs of a bleeding disorder were observed in the Chinese Crested dog breed. Thus, only the c.1657G variant was found in the homozygous state exclusively in VWD affecteds, and this variant is the strongest candidate to be the cause of VWD type 2 in the German Wirehaired Pointer breed. A screen of German Shorthaired Pointers indicated that the variant also segregates with VWD in this breed

Improved 3D Printing and Cell Biology Characterization of Inorganic-Filler Containing Alginate-Based Composites for Bone Regeneration: Particle Shape and Effective Surface Area Are the Dominant Factors for Printing Performance

The use of organic–inorganic 3D printed composites with enhanced properties in biomedical applications continues to increase. The present study focuses on the development of 3D printed alginate-based composites incorporating inorganic fillers with different shapes (angular and round), for bone regeneration. Reactive fillers (bioactive glass 13–93 and hydroxyapatite) and non-reactive fillers (inert soda–lime glass) were investigated. Rheological studies and the characterization of various extrusion-based parameters, including material throughput, printability, shape fidelity and filament fusion, were carried out to identify the parameters dominating the printing process. It was shown that the effective surface area of the filler particle has the highest impact on the printing behavior, while the filler reactivity presents a side aspect. Composites with angular particle morphologies showed the same high resolution during the printing process, almost independent from their reactivity, while composites with comparable amounts of round filler particles lacked stackability after printing. Further, it could be shown that a higher effective surface area of the particles can circumvent the need for a higher filler content for obtaining convincing printing results. In addition, it was proven that, by changing the particle shape, the critical filler content for the obtained adequate printability can be altered. Preliminary in vitro biocompatibility investigations were carried out with the bioactive glass containing ink. The 3D printed ink, forming an interconnected porous scaffold, was analyzed regarding its biocompatibility in direct or indirect contact with the pre-osteoblast cell line MC3T3-E1. Both kinds of cell tests showed increased viability and a high rate of proliferation, with complete coverage of the 3D scaffolds’ surface already after 7 d post cell-seeding