94 research outputs found
Potential-flow models for channelled two-dimensional premixed flames around near-circular obstacles
International audienceThe dynamics of two-dimensional thin premixed flames is addressed in the framework of mathematical models where the flow field on either side of the front is piecewise incompressible and vorticity free. Flames confined in channels with asymptotically straight impenetrable walls are considered. Besides a few free propagations along straight channels, attention is focused on flames propagating against high-speed flows and positioned near a round central obstacle or near two symmetric bumps protruding inward. Combining conformal maps and Green's functions, a regularized generalization of Frankel's integro-differential equation for the instantaneous front shape in each configuration is derived and solved numerically. This produces a variety of real looking phenomena: steady fronts symmetric or not, noise-induced subwrinkles, flashback events, and breathing fronts in pulsating flows. Perspectives and open mathematical and physical problems are finally evoked
Model Equation for the Dynamics of Wrinkled Shockwaves: Comparison with DNS and Experiments
International audienceA model equation for the dynamics and the geometry of the wrinkled front of shock waves, obtained for strong shocks in the Newtonian limit, is tested by comparison with direct numerical simulations and a shock tube experiment
Non-linear model equation for three-dimensional Bunsen flames
The non linear description of laminar premixed flames has been very successful, because of the existence of model equations describing the dynamics of these flames. The Michelson Sivashinsky equation is the most well known of these equations, and has been used in different geometries, including three-dimensional quasi-planar and spherical flames. Another interesting model, usually known as the Frankel equation,which could in principle take into account large deviations of the flame front, has been used for the moment only for two-dimensional expanding and Bunsen flames. We report here for the first time numerical solutions of this equation for three-dimensional flames
Experimental two dimensional cellular flames
International audienceThe propagation of very unstable cellular flames (also called self-turbulent flames) is studied experimentally in a Hele-Shaw cell. This quasi-two dimensional configuration allows for quantitative image analysis. The dynamics of the premixed flame is controlled in these conditions by the creation or merging of the cusps that appear on the front
Potential model of a 2D Bunsen flame
The Michelson Sivashinsky equation, which models the non linear dynamics of
premixed flames, has been recently extended to describe oblique flames. This
approach was extremely successful to describe the behavior on one side of the
flame, but some qualitative effects involving the interaction of both sides of
the front were left unexplained. We use here a potential flow model, first
introduced by Frankel, to study numerically this configuration. Furthermore,
this approach allows us to provide a physical explanation of the phenomena
occuring in this geometry by means of an electrostatic analogy
Compound Specific Hydrogen Isotope Composition of Type II and III Kerogen Extracted by Pyrolysis-GC-MS-IRMS
The use of Hydrogen (H) isotopes in understanding oil and gas resource plays is in its infancy. Described here is a technique for H isotope analysis of organic compounds pyrolyzed from oil and gas shale-derived kerogen. Application of this technique will progress our understanding. This work complements that of Pernia et al. (2013, this meeting) by providing a novel method for the H isotope analysis of specific compounds in the characterization of kerogen extracted by analytically diverse techniques. Hydrogen isotope analyses were carried out entirely "on-line" utilizing a CDS 5000 Pyroprobe connected to a Thermo Trace GC Ultra interfaced with a Thermo MAT 253 IRMS. Also, a split of GC-separated products was sent to a DSQ II quadrupole MS to make semi-quantitative compositional measurements of the extracted compounds. Kerogen samples from five different basins (type II and III) were dehydrated (heated to 80 C overnight in vacuum) and analyzed for their H isotope compositions by Pyrolysis-GC-MS-TC-IRMS. This technique takes pyrolysis products separated via GC and reacts them in a high temperature conversion furnace (1450 C) which quantitatively forms H2, following a modified method of Burgoyne and Hayes, (1998, Anal. Chem., 70, 5136-5141). Samples ranging from approximately 0.5 to 1.0mg in size, were pyrolyzed at 800 C for 30s. Compounds were separated on a Poraplot Q GC column. Hydrogen isotope data from all kerogen samples typically show enrichment in D from low to high molecular weight compounds. Water (H2O) average deltaD = -215.2 (V-SMOW), ranging from -271.8 for the Marcellus Shale to -51.9 for the Polish Shale. Higher molecular weight compounds like toluene (C7H8) have an average deltaD of -89.7 0/00, ranging from -156.0 for the Barnett Shale to -50.0 for the Monterey Shale. We interpret these data as representative of potential H isotope exchange between hydrocarbons and sediment pore water during formation within each basin. Since hydrocarbon H isotopes readily exchange with water, these data may provide some useful information on gas-water or oil-water interaction in resource plays, and further as a possible indicator of paleo-environmental conditions. Alternatively, our data may be an indication of H isotope exchange with water and/or acid during the kerogen isolation process. Either of these interpretations will prove useful when deciphering H isotope data derived from kerogen analysis. More experiments are planned to discern these two or other possible scenarios
Hydrogen (H) Isotope Composition of Type II Kerogen Extracted by Pyrolysis-GC-MS-IRMS: Terrestrial Shale Deposits as Martian Analogs
Described here is a technique for H isotope analysis of organic compounds pyrolyzed from kerogens isolated from gas and liquidsrich shales. Application of this technique will progress the understanding of the use of H isotopes not only in potential kerogen occurrences on Mars, but also in terrestrial oil and gas resource plays. H isotope extraction and analyses were carried out utilizing a CDS 5000 Pyroprobe connected to a Thermo Trace GC interfaced with a Thermo MAT 253 IRMS. Also, a split of GCseparated products was sent to a DSQ II quadrupole MS to make qualitative and semiquantitative compositional measurements of these products. Kerogen samples from five different basins (type II and IIS) were dehydrated (heated to 80 C overnight under vacuum) and analyzed for their H isotope compositions by PyrolysisGCMSTCIRMS. This technique takes pyrolysis products separated via GC and reacts them in a high temperature conversion furnace (1450 C), which quantitatively forms H2. Samples ranging from ~0.5 to 1.0mg in size, were pyrolyzed at 800 C for 30s. and separated on a Poraplot Q GC column. H isotope data from all kerogen samples typically show enrichment in D from low to high molecular weight. H2O average delta D = 215.2 per mille (VSMOW), ranging from 271.8 per mille for the Marcellus Shale to 51.9 per mille for a Polish shale. Higher molecular weight compounds like toluene (C7H8) have an average delta D of 89.7 per mille, ranging from 156.0 per mille for the Barnett Shale to 50.0 per mille for the Monterey Shale. We interpret these data as representative of potential H isotope exchange between hydrocarbons and sediment pore water during basin formation. Since hydrocarbon H isotopes readily exchange with water, these data may provide some useful information on gaswater or oilwater interaction in resource plays, and further as a possible indicator of paleoenvironmental conditions. Alternatively, our data may be an indication of H isotope exchange with water and/or acid during the kerogen isolation process. Either of these interpretations will prove useful when deciphering H isotope data derived from kerogen analyses. Understanding the role that these Hbearing compounds play in terrestrial shale paleoenvironmental reconstruction may also prove useful as analogs for understanding the interactions of water and potential kerogen/organic compounds on the planet Mars
Emergency surgery for splenic flexure cancer: results of the SFC Study Group database
Background: The effectiveness of surgical treatment for splenic flexure carcinomas (SFCs) in emergency settings remains unexplored. This study aims to compare the perioperative and long-term outcomes of different alternatives for emergency SFC resection. Method: This multicenter retrospective study was based on the SFC Study Group database. For the present analysis, SFC patients were selected if they had received emergency surgical resection with curative intent between 2000 and 2018. Extended right colectomy (ERC), left colectomy (LC), and segmental left colectomy (SLC) were evaluated and compared. Results: The study sample was composed of 90 SFC patients who underwent emergency ERC (n = 55, 61.1%), LC (n = 18, 20%), or SLC (n = 17, 18.9%). Bowel obstruction was the most frequent indication for surgery (n = 75, 83.3%), and an open approach was chosen in 81.1% of the patients. A higher incidence of postoperative complications was observed in the ERC group (70.9%) than in the LC (44.4%) and SLC groups (47.1%), with a significant procedure-related difference for severe postoperative complications (Dindo-Clavien â„ III; adjusted odds ratio for ERC vs. LC:7.23; 95% CI 1.51-34.66; p = 0.013). Anastomotic leakage occurred in 8 (11.2%) patients, with no differences between the groups (p = 0.902). R0 resection was achieved in 98.9% of the procedures, and â„ 12 lymph nodes were retrieved in 92.2% of patients. Overall and disease-free survival rates at 5 years were similar between the groups and were significantly associated with stage pT4 and the presence of synchronous metastases. Conclusion: In the emergency setting, ERC and open surgery are the most frequently performed procedures. ERC is associated with increased odds of severe postoperative complications when compared to more conservative SFC resections. Nonetheless, all the alternatives seem to provide similar pathologic and long-term outcomes, supporting the oncological safety of more conservative resections for emergency SFCs
Improving the reach of vaccines to low-resource regions, with a needle-free vaccine delivery device and long-term thermostabilization
Dry-coated microprojections can deliver vaccine to abundant antigen-presenting cells in the skin and induce efficient immune responses and the dry-coated vaccines are expected to be thermostable at elevated temperatures. In this paper, we show that we have dramatically improved our previously reported gas-jet drying coating method and greatly increased the delivery efficiency of coating from patch to skin to from 6.5% to 32.5%, by both varying the coating parameters and removing the patch edge. Combined with our previous dose sparing report of influenza vaccine delivery in a mouse model, the results show that we now achieve equivalent protective immune responses as intramuscular injection (with the needle and syringe), but with only 1/30th of the actual dose. We also show that influenza vaccine coated microprojection patches are stable for at least 6 months at 23 degrees C. inducing comparable immunogenicity with freshly coated patches. The dry-coated microprojection patches thus have key and unique attributes in ultimately meeting the medical need in certain low-resource regions with low vaccine affordability and difficulty in maintaining "cold-chain" for vaccine storage and transport. (C) 2011 Elsevier B.V. All rights reserved
Transdermal Drug Delivery Aided by an Ultrasound Contrast Agent: An In Vitro Experimental Study
Sonophoresis temporarily increases skin permeability such that medicine can be delivered transdermally. Cavitation is believed to be the predominant mechanism in sonophoresis. In this study, an ultrasound contrast agent (UCA) strategy was adopted instead of low frequency ultrasound to assure that cavitation occurred, and the efficacy of sonophoresis with UCA was quantitatively analyzed by optical measurements. The target drug used in this study was 0.1 % DefinityÂź in 70% glycerol, which was delivered into porcine skin samples. Glycerol was used because it is an optical clearing agent, and the efficiency of glycerol delivery could be analyzed with optical measurements. The applied acoustic pressure was approximately 600 kPa at 1 MHz ultrasound with a 10% duty cycle for 60 minutes. Experimental results indicated that the measured relative contrast (RC) after sonophoresis with UCA was approximately 80% higher than RC after sonophoresis without UCA. In addition, the variance of RC was also reduced by more than 50% with the addition of a UCA. The use of a UCA appeared to increase cavitation, demonstrating that the use of a UCA can be effective in transdermal drug delivery (TDD)
- âŠ