81 research outputs found

    Proposal for a single-molecule field-effect transistor for phonons

    Full text link
    We propose a practical realization of a field-effect transistor for phonons. Our device is based on a single ionic polymeric molecule and it gives modulations as large as -25% in the thermal conductance for feasible temperatures and electric field magnitudes. Such effect can be achieved by reversibly switching the acoustic torsion mode into an optical mode through the coupling of an applied electric field to the dipole moments of the monomers. This device can pave the way to the future development of phononics at the nanoscale or molecular scale

    Biofilter Media Characterization Using Water Sorption Isotherms

    Get PDF
    Compost material has been used extensively as a gas‐phase biofilter media for contaminant gas treatment in recent years. One of the biggest challenges in the use of this type of material is adequate control of compost moisture content and understanding its effect on the biofiltration process. The present work provides a methodology for characterization of biofilter media under low moisture conditions. Results indicated that low levels of equilibrium moisture content (EMC) were obtained for high levels of equilibrium relative humidity (ERH), i.e., 99% ERH produced EMC of approximately 20% (dry basis) at 25° C. Most bacteria struggle to survive in environments with ERH levels lower than 95%. Compost material from the same source was sieved into four compost particle size (PS) ranges to evaluate its water sorption behavior: 4.76 mm \u3e PS1 \u3e 3.36 mm \u3e PS2 \u3e 2.38 mm \u3e PS3 \u3e 2.00 mm \u3e PS4 \u3e 1.68 mm. Observed data were tested against isotherm models for their goodness‐of‐fit. Seven isotherm models were compared: (1) Langmuir; (2) Freundlich; (3) Sips; (4) Brunauer, Emmett, and Teller (BET); (5) BET for n‐layers; (6) Guggenheim, Anderson, de Boer (GAB); and (7) Henderson. In comparison with the other models, the Henderson model provided the best fit, as determined by the best combination of regression coefficient standard errors (Δ) and coefficients of determination (r2) for all four particle size ranges tested (95% confidence interval, C.I., and prediction interval, P.I.). The Henderson model was then used to test for significant differences in isotherms by particle size ranges.The four tested particle size ranges were not significantly different from each other (p \u3c 0.05), indicating similar water sorption behavior. Data from all four particle size ranges were pooled and regressed, and the minimum required moisture to maintain ERH at or above 95% was 16.41% ± 2.68% (dry basis)

    Characterizing Physical Properties of Gas-Phase Biofilter Media

    Get PDF
    Gas-phase biofiltration is an effective technology for reduction of odors and trace-gas contaminants. Significant contributions to the technical literature regarding the characterization of biofilter media have been generated in the past two decades. Nevertheless, the information produced has not been systematically organized. The objective of this study is to demonstrate and document methods for physical characterization of gas-phase compost biofilters (GPCB). The inclusion of moisture content, compaction, and particle size effects in the determination of media bulk density and porosity, field capacity, drying rate analysis, water sorption isotherms, and resistance to airflow is demonstrated. Results indicated that: (1) higher moisture content led to about 2% reduction in porosity after compaction; (2) biofilter media sieved into three particle size ranges (12.5 mm \u3e PSR1 \u3e 8.0 mm \u3e PSR2 \u3e 4.75 mm \u3e PSR3 \u3e 1.35 mm) produced significantly different media field capacities, i.e., 52.8% (PSR1), 61.6% (PSR2), and 72.2% (PSR3) on a wet basis; (3) a drying rate analysis provides important information regarding media-water relations and can be potentially used for in situ indirect media moisture monitoring (as shown in previous work, changes in drying rate significantly affected ammonia removal and nitrous oxide generation); (4) the Henderson isotherm can be accurately used for dry organic media to determine the minimum moisture required for microbial activity; and finally (5) the combination of high airflow and high moisture content drastically increased pressure drop up to 65-fold (6350 Pa m-1) compared to the lowest pressure drop (98 Pa m-1). Further, the research community should integrate efforts to elaborate standard methods and protocols for physical characterization of gas-phase biofilter media before and during biofilter operation

    Optimal management of constipation associated with irritable bowel syndrome.

    Get PDF
    Irritable bowel syndrome (IBS) is a common chronic functional disorder of the gastrointestinal tract, meanly characterized by recurrent abdominal pain or discomfort and altered bowel habit. It is a complex disorder involving biological, environmental, and psychosocial factors. The diagnosis is achieved according to the Rome III criteria provided that organic causes have been excluded. Although IBS does not constitute a life-threatening condition, it has a remarkable prevalence and profoundly reduces the quality of life with burdening socioeconomic costs. One of the principal concerns about IBS is the lack of effective therapeutic options. Up to 40% of patients are not satisfied with any available medications, especially those suffering from chronic constipation. A correct management of IBS with constipation should evolve through a global approach focused on the patient, starting with careful history taking in order to assess the presence of organic diseases that might trigger the disorder. Therefore, the second step is to examine lifestyle, dietary habits, and psychological status. On these bases, a step-up management of disease is recommended: from fiber and bulking agents, to osmotic laxative drugs, to new molecules like lubiprostone and linaclotide. Although new promising tools for relief of bowel-movement-related symptoms are being discovered, a dedicated doctor\u2013patient relationship still seems to be the key for succes

    Development of a Chemiresistor Sensor Based on Polymers-Dye Blend for Detection of Ethanol Vapor

    Get PDF
    The conductive blend of the poly (3,4-ethylene dioxythiophene) and polystyrene sulfonated acid (PEDOT-PSS) polymers were doped with Methyl Red (MR) dye in the acid form and were used as the basis for a chemiresistor sensor for detection of ethanol vapor. This Au | Polymers-dye blend | Au device was manufactured by chemical vapor deposition and spin-coating, the first for deposition of the metal electrodes onto a glass substrate, and the second for preparation of the organic thin film forming ∌1.0 mm2 of active area. The results obtained are the following: (i) electrical resistance dependence with atmospheres containing ethanol vapor carried by nitrogen gas and humidity; (ii) sensitivity at 1.15 for limit detection of 26.25 ppm analyte and an operating temperature of 25 °C; and (iii) the sensing process is quickly reversible and shows very a low power consumption of 20 ÎŒW. The thin film morphology of ∌200 nm thickness was analyzed by Atomic Force Microscopy (AFM), where it was observed to have a peculiarly granulometric surface favorable to adsorption. This work indicates that PEDOT-PSS doped with MR dye to compose blend film shows good performance like resistive sensor

    Parùmetros psicométricos: uma anålise de testes psicológicos comercializados no Brasil

    Full text link

    Fronteira, cana e tråfico: escravidão, doenças e mortes em Capivari, SP, 1821-1869

    Full text link
    • 

    corecore