Grafting of polystyrene on nitrogen-doped multi-walled carbon nanotubes.

International audiencePolymer grafting of polystyrene (PS) on nitrogen-doped multiwall carbon nanotubes (CNx) was successfully obtained by a "grafting from" technique. The production method involves the immobilization of initiators, using wet chemistry, onto the nanotube surface, followed by an in situ surface-initiated polymerization. The polymer-grafting carbon nanotubes synthesis includes the free radical functionalization of CNx and the "controlled/living" Nitroxide Mediated Radical Polymerization (NMRP). The obtained products were studied using several microscopic techniques as scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and electron energy loss spectroscopy (EELS). The characterization also includes thermogravimetric analysis (TGA), Raman spectroscopy, infrared spectroscopy, and electron spin resonance (ESR), among others. The analyzed samples were also compared with solutions fabricated by physical blending of the polymer and CNx nanotubes. These results indicate that the nanotube radical functionalization, the chemical grafting, and the polymerization reaction were obtained over CNx when NMRP method was successfully used, giving rise to a uniform PS layer of several nanometers grafted on the outer surface of the CNx nanotubes. Several properties of the PS-grafted CNx nanotubes were also studied. It is shown that the production method leads to a narrower distribution of the external diameters. Moreover, their solubilization in organic solvents is greatly improved. Finally, the dispersion of PS-grafted CNx into a PS matrix is studied to determine the differences in filler dispersion and interfacial adhesion strength, in comparison with nanocomposites elaborated with as-produced CNx

Optimizing cellulose fraction for enhanced utility: Comparative pre-treatment of Agave tequilana Weber var. blue bagasse fiber for sustainable applications

In recent decades, natural fibers have emerged as an alternative to synthetic fibers due to their renewable nature, lower environmental impact, and comparable strength properties. Agave bagasse, a byproduct of agave juice extraction in Mexico, stands out for its potential in various industrial applications, notably biocomposite production. Bagasse is rich in cellulose, along with hemicellulose and lignin. Cellulose is the most suitable to be converted into valuable products, and it is versatile, renewable, and biodegradable. An effective pre-treatment is crucial to enrich its fraction. This study aims to determine the optimal pre-treatment conditions for the agave bagasse. Three different pre-treatments were tested, acid (H2SO4), enzymatic (Cellic® HTec2 enzymatic preparation), and sequence of acid-enzymatic (sulfuric acid and Cellic® HTec2), to determine which pre-treatment got the optimal cellulose fraction increase. The acid pre-treatment was conducted over three time ranges (5, 10, and 15 min) at different acid concentrations (1%, 1.5%, and 2%). Enzymatic reactions were conducted over 24 h, testing three different enzyme concentrations (1.5%, 3%, 4.5%). The sequential pre-treatment utilized the optimal conditions derived from the acid experiments (1.5% H2SO4 for 10 min), followed by enzymatic reactions carried out over three different durations (6, 12, and 24 h). The findings revealed that a 1.5% acid concentration applied for 10 min was the most efficient pre-treatment method. This pre-treatment resulted in a 1.9-fold increase in the cellulose fraction while reducing hemicellulose content by 30%. The hemicellulose reduction was confirmed through Fourier Transform IR spectroscopy (FTIR) analysis, complemented by scanning electron microscopy (SEM) observations highlighting physical alterations in the fiber structure. Furthermore, thermogravimetric analysis (TGA) demonstrated improved thermal stability, suggesting potential use in biocomposites. Future research should evaluate the environmental impact of optimized pre-treatment methods for agave bagasse