Uncertainties on exclusive diffractive Higgs and jets production at the LHC

Two theoretical descriptions of exclusive diffractive jets and Higgs production at the LHC were implemented into the FPMC generator: the Khoze, Martin, Ryskin model and the Cudell, Hern\'andez, Ivanov, Dechambre exclusive model. We then study the uncertainties. We compare their predictions to the CDF measurement and discuss the possibility of constraining the exclusive Higgs production at the LHC with early measurements of exclusive jets. We show that the present theoretical uncertainties can be reduced with such data by a factor of 5

Exclusive quasielastic production of dijets at hadronic colliders

We critically re-examine the calculation of central production of dijets in quasi-elastic hadronic collisions. We find that the process is not dominated by the perturbative contribution, and discuss several sources of uncertainties in the calculation.Comment: 4 pages, talk given at Diffraction-2008, La Londe-les-Maures, France, 9-14 Sept 200

What is the impact of physical effort on the diagnosis of concussion?

Objective: Sport-related concussion commonly occurs in contact sports such as rugby. To date, diagnosis is based on the realization of clinical tests conducted pitch-side. Yet, the potential effect of prior physical effort on the results of these tests remains poorly understood. The purpose of this study was to determine whether preceding physical effort can influence the outcome of concussion assessments. Design: Prospective observational study. Setting: University Medicine Center Patients: A cohort of 40 subjects (20 rugby players and 20 athletes from a range of sports). Intervention: A concussion assessment was performed immediately following physical activity. Following a period of 6 months and under the same experimental conditions, the same cohort performed the same tests in resting conditions. Main outcome measure: Results of concussion tests. Results: In both cohorts, the comparison for post-exercise and rest assessments demonstrated a most likely moderate-to-very large increase in the number of symptoms, severity of symptoms and BESS score. In the rugby cohort, scores for concentration, delayed memory and SAC, likely-to-most likely decreased following completion of physical activity compared to baseline values. The between-cohort comparison showed a greater impact post-exercise in the rugby players for delayed recall (0.73±0.61, 93/7/1) and SAC score (0.75±0.41, 98/2/0). Conclusion: Physical activity altered the results of concussion diagnostic tests in athletes from a range of sports and notably in rugby players. Therefore, physical efforts prior to the concussion incident should be accounted for during pitch-side assessments and particularly during rugby competition and training

Central Exclusive Dijet Production

Calculations of central exclusive production are affected by very large perturbative and non-perturbative corrections. In this talk, we summarize the results of a study of the uncertainties on these corrections in the case of exclusive dijet production.Comment: To appear in the Proceedings of the 43rd Rencontres de Moriond, QCD and High Energy Interactions, La Thuile, Italy, 1-8 March 200

Clinical outcomes of 130 patients with primary and secondary lung tumors treated with Cyberknife robotic stereotactic body radiotherapy

K

Design and RF measurements of a 5 GHz 500 kW window for the ITER LHCD system

International audienceCEA/IRFM is conducting R&D efforts in order to validate the critical RF components of the 5 GHz ITER LHCD system, which is expected to transmit 20 MW of RF power to the plasma. Two 5 GHz 500 kW BeO pill-box type window prototypes have been manufactured in 2012 by the PMB Company, in close collaboration with CEA/IRFM. Both windows have been validated at low power, showing good agreement between measured and modeling, with a return loss better than 32 dB and an insertion loss below 0.05 dB. This paper reports on the window RF design and the low power measurements. The high power tests up to 500kW have been carried out in March 2013 in collaboration with NFRI. Results of these tests are also reported. In the current ITER LHCD design, 20 MW Continuous Wave (CW) of Radio-Frequency power at 5 GHz are expected to be generated and transmitted to the plasma. In order to separate the vacuum vessel pressure from the cryostat waveguide pressure, forty eight 5 GHz 500kW CW windows are to be assembled on the waveguides at the equatorial port flange. For nuclear safety reasons, forty eight additional windows could be located in the cryostat section, to separate and monitor the cryostat waveguide pressure from the exterior transmission line pressure. These windows are identified as being one of the main critical components for the ITER LHCD system since first ITER LHCD studies [1] [2] [3] or more recently [4] [5] , and clearly require an important R&D effort. In this context and even if the LHCD system is not part of the construction baseline, the CEA/IRFM is conducting a R&D effort in order to validate a design and the performances of these RF windows. In order to begin the assessment of this need, two 5 GHz 500 kW/5 s pill-box type windows prototypes have been manufactured in 2012 by the PMB Company in close collaboration with the CEA/IRFM [6]. The section 2 of this paper reports the RF and mechanical design of a 5 GHz window. Some features of the mechanical design and the experimental RF measurements at low power are reported in section 3. High power results, made in collaboration with NFRI, are detailed in section 4. The development of CW windows is discussed in the conclusion. 2-RF AND MECHANICAL DESIGN The proposed 5 GHz RF window is based on a pill-box design [2] , i.e. a ceramic brazed in portion of a circular waveguide, connected on either side to a rectangular waveguide section. Typical design rules of thumb of such device are circular section diameter about the same size of the diagonal of the rectangular waveguide (cf. FIGURE 1). Without taking into account the ceramic, the circular section length is approximately half a guided wavelength of the circular TE 11 mode, in order for the device to act as a half-wave transformer. Once optimized, taking into account the ceramic, matching is correct only for a narrow band of frequency and is very sensitive to the device dimensions and the ceramic relative permittivity. The heat losses in the ceramic, which have to be extracted by an active water cooling, depends on the inside electric field topology and of ceramic dielectric loss (loss tangent). Undesirable modes due to parasitic resonances can be excited in the ceramic volume, raising the electric field an

Central exclusive production of dijets at hadronic colliders

In view of the recent diffractive dijet data from CDF run II, we critically re-evaluate the standard approach to the calculation of central production of dijets in quasi-elastic hadronic collisions. We find that the process is dominated by the non-perturbative region, and that even perturbative ingredients, such as the Sudakov form factor, are not under theoretical control. Comparison with data allows us to fix some of the uncertainties. Although we focus on dijets, our arguments apply to other high-mass central systems, such as the Higgs boson.Comment: 37 pages, 18 figures. Two new appendices, and a discussion of the upper scale of the Sudakov form factor are introduced. The text about the calculation of the uncertainties has been rewritte