Aged organic aerosol in the Eastern Mediterranean: the Finokalia Aerosol Measurement Experiment – 2008

Aged organic aerosol (OA) was measured at a remote coastal site on the island of Crete, Greece during the Finokalia Aerosol Measurement Experiment-2008 (FAME-2008), which was part of the EUCAARI intensive campaign of May 2008. The site at Finokalia is influenced by air masses from different source regions, including long-range transport of pollution from continental Europe. A quadrupole aerosol mass spectrometer (Q-AMS) was employed to measure the size-resolved chemical composition of non-refractory submicron aerosol (NR-PM<sub>1</sub>), and to estimate the extent of oxidation of the organic aerosol. Factor analysis was used to gain insights into the processes and sources affecting the OA composition. The particles were internally mixed and liquid. The largest fraction of the dry NR-PM<sub>1</sub> sampled was ammonium sulfate and ammonium bisulfate, followed by organics and a small amount of nitrate. The variability in OA composition could be explained with two factors of oxygenated organic aerosol (OOA) with differing extents of oxidation but similar volatility. Hydrocarbon-like organic aerosol (HOA) was not detected. There was no statistically significant diurnal variation in the bulk composition of NR-PM<sub>1</sub> such as total sulfate or total organic aerosol concentrations. However, the OA composition exhibited statistically significant diurnal variation with more oxidized OA in the afternoon. The organic aerosol was highly oxidized, regardless of the source region. Total OA concentrations also varied little with source region, suggesting that local sources had only a small effect on OA concentrations measured at Finokalia. The aerosol was transported for about one day before arriving at the site, corresponding to an OH exposure of approximately 4×10<sup>11</sup> molecules cm<sup>−3</sup> s. The constant extent of oxidation suggests that atmospheric aging results in a highly oxidized OA at these OH exposures, regardless of the aerosol source

Measurement of the ambient organic aerosol volatility distribution: application during the Finokalia Aerosol Measurement Experiment (FAME-2008)

A variable residence time thermodenuder (TD) was combined with an Aerodyne Aerosol Mass Spectrometer (AMS) and a Scanning Mobility Particle Sizer (SMPS) to measure the volatility distribution of aged organic aerosol in the Eastern Mediterranean during the Finokalia Aerosol Measurement Experiment in May of 2008 (FAME-2008). A new method for the quantification of the organic aerosol volatility distribution was developed combining measurements of all three instruments together with an aerosol dynamics model. <br><br> Challenges in the interpretation of ambient thermodenuder-AMS measurements include the potential resistances to mass transfer during particle evaporation, the effects of particle size on the evaporated mass fraction, the changes in the AMS collection efficiency and particle density as the particles evaporate partially in the TD, and finally potential losses inside the TD. Our proposed measurement and data analysis method accounts for all of these problems combining the AMS and SMPS measurements. <br><br> The AMS collection efficiency of the aerosol that passed through the TD was found to be approximately 10% lower than the collection efficiency of the aerosol that passed through the bypass. The organic aerosol measured at Finokalia is approximately 2 or more orders of magnitude less volatile than fresh laboratory-generated monoterpene (α-pinene, β-pinene and limonene under low NO<sub>x</sub> conditions) secondary organic aerosol. This low volatility is consistent with its highly oxygenated AMS mass spectrum. The results are found to be highly sensitive to the mass accommodation coefficient of the evaporating species. This analysis is based on the assumption that there were no significant reactions taking place inside the thermodenuder

X-ray lenses fabricated by deep x-ray lithography

Refractive x-ray lenses have been fabricated using deep x-ray lithography. Lenses were produced directly in 1- to 6-mm-thick sheets of polymethylmethacrylate (PMMA) with as many as 100 cylindrical lenses along the optical axis. The fabrication process consists of exposing the PMMA sheets to high-energy synchrotron radiation through a mask of 50-micron-thick gold on silicon and subsequent development in ketone. The lenses are suitable for use in synchrotron radiation from a bending magnet at the Advanced Photon Source in the energy range of 8-16 keV. Results of measurements of focus quality, flux density gain, and scatter are presented and discussed with regard to the quality of lens material and fabrication method. Means for improving the performance of the lenses is discussed

Recognising facial expressions in video sequences

We introduce a system that processes a sequence of images of a front-facing human face and recognises a set of facial expressions. We use an efficient appearance-based face tracker to locate the face in the image sequence and estimate the deformation of its non-rigid components. The tracker works in real-time. It is robust to strong illumination changes and factors out changes in appearance caused by illumination from changes due to face deformation. We adopt a model-based approach for facial expression recognition. In our model, an image of a face is represented by a point in a deformation space. The variability of the classes of images associated to facial expressions are represented by a set of samples which model a low-dimensional manifold in the space of deformations. We introduce a probabilistic procedure based on a nearest-neighbour approach to combine the information provided by the incoming image sequence with the prior information stored in the expression manifold in order to compute a posterior probability associated to a facial expression. In the experiments conducted we show that this system is able to work in an unconstrained environment with strong changes in illumination and face location. It achieves an 89\% recognition rate in a set of 333 sequences from the Cohn-Kanade data base

Volatility and hygroscopicity of aging secondary organic aerosol in a smog chamber

Peer reviewe

Source apportionment of size and time resolved trace elements and organic aerosols from an urban courtyard site in Switzerland

Time and size resolved data of trace elements were obtained from measurements with a rotating drum impactor (RDI) and subsequent X-ray fluorescence spectrometry. Trace elements can act as indicators for the identification of sources of particulate matter <10 μm (PM10) in ambient air. Receptor modeling was performed with positive matrix factorization (PMF) for trace element data from an urban background site in Zürich, Switzerland. Eight different sources were identified for the three examined size ranges (PM1-0.1, PM2.5-1 and PM 10-2.5): secondary sulfate, wood combustion, fire works, road traffic, mineral dust, de-icing salt, industrial and local anthropogenic activities. The major component was secondary sulfate for the smallest size range; the road traffic factor was found in all three size ranges. This trace element analysis is complemented with data from an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (AMS), assessing the PM1 fraction of organic aerosols. A separate PMF analysis revealed three factors related to three of the sources found with the RDI: oxygenated organic aerosol (OOA, related to inorganic secondary sulfate), hydrocarbon-like organic aerosol (HOA, related to road traffic) and biomass burning organic aerosol (BBOA), explaining 60 %, 22 % and 17 % of total measured organics, respectively. Since different compounds are used for the source classification, a higher percentage of the ambient PM10 mass concentration can be apportioned to sources by the combination of both methods. © 2011 Author(s)

Validating an infrared thermal switch as a novel access technology

<p>Abstract</p> <p>Background</p> <p>Recently, a novel single-switch access technology based on infrared thermography was proposed. The technology exploits the temperature differences between the inside and surrounding areas of the mouth as a switch trigger, thereby allowing voluntary switch activation upon mouth opening. However, for this technology to be clinically viable, it must be validated against a gold standard switch, such as a chin switch, that taps into the same voluntary motion.</p> <p>Methods</p> <p>In this study, we report an experiment designed to gauge the concurrent validity of the infrared thermal switch. Ten able-bodied adults participated in a series of 3 test sessions where they simultaneously used both an infrared thermal and conventional chin switch to perform multiple trials of a number identification task with visual, auditory and audiovisual stimuli. Participants also provided qualitative feedback about switch use. User performance with the two switches was quantified using an efficiency measure based on mutual information.</p> <p>Results</p> <p>User performance (p = 0.16) and response time (p = 0.25) with the infrared thermal switch were comparable to those of the gold standard. Users reported preference for the infrared thermal switch given its non-contact nature and robustness to changes in user posture.</p> <p>Conclusions</p> <p>Thermal infrared access technology appears to be a valid single switch alternative for individuals with disabilities who retain voluntary mouth opening and closing.</p

The role of configurality in the Thatcher illusion: an ERP study.

The Thatcher illusion (Thompson in Perception, 9, 483-484, 1980) is often explained as resulting from recognising a distortion of configural information when 'Thatcherised' faces are upright but not when inverted. However, recent behavioural studies suggest that there is an absence of perceptual configurality in upright Thatcherised faces (Donnelly et al. in Attention, Perception & Psychophysics, 74, 1475-1487, 2012) and both perceptual and decisional sources of configurality in behavioural tasks with Thatcherised stimuli (Mestry, Menneer et al. in Frontiers in Psychology, 3, 456, 2012). To examine sources linked to the behavioural experience of the illusion, we studied inversion and Thatcherisation of faces (comparing across conditions in which no features, the eyes, the mouth, or both features were Thatcherised) on a set of event-related potential (ERP) components. Effects of inversion were found at the N170, P2 and P3b. Effects of eye condition were restricted to the N170 generated in the right hemisphere. Critically, an interaction of orientation and eye Thatcherisation was found for the P3b amplitude. Results from an individual with acquired prosopagnosia who can discriminate Thatcherised from typical faces but cannot categorise them or perceive the illusion (Mestry, Donnelly et al. in Neuropsychologia, 50, 3410-3418, 2012) only differed from typical participants at the P3b component. Findings suggest the P3b links most directly to the experience of the illusion. Overall, the study showed evidence consistent with both perceptual and decisional sources and the need to consider both in relation to configurality