Lessons Learned on the Tensile and Bond Behavior of Fabric Reinforced Cementitious Matrix (FRCM) Composites

Fabric Reinforced Cementitious Matrix (FRCM) composites represent an effective, compatible and cost-efficient solution for strengthening and retrofitting existing structures. A strong research effort was done to investigate the tensile and bond properties of these materials, as well as the overall behaviour of strengthened members. A Round Robin Test was organized by Rilem TC 250-CSM on 28 FRCM composites comprising basalt, carbon, glass, PBO, aramid and steel textiles, embedded in either cement, lime or geopolymer mortars, to collect an experimental dataset and define test protocols. This paper collects the outcomes of this study to highlight fundamental properties of FRCM and to investigate the variability of test results. Grid spacing, equivalent thickness of the textiles and mechanical properties of FRCM composites, such as stiffness, tensile and bond strength, are provided. Based on the comparison of experimental outcomes, the scatter of the mechanical properties is estimated, as a consequence of the quasi-brittle behaviour of the inorganic matrix and its sensitivity to manufacturing, curing and handling processes. Eventually, the influence of testing implementation, such as gripping method and measuring techniques, are outlined

Strain and damage monitoring in carbon-nanotube-based composite under cyclic strain

The resistive behavior of multi-walled carbon nanotube (MWCNT)/epoxy resins, tested under mechanical cycles and different levels of applied strain, was investigated for specimens loaded in axial tension. The surface normalized resistivity is linear with the strain for volume fraction of MWCNTs between 2.96 × 10-4 and 2.97 × 10-3 (0.05 and 0.5% wt/wt). For values lower than 0.05% wt/wt, close to the electrical percolation threshold (EPT) a non-linear behavior was observed. The strain sensitivity, in the range between 0.67 and 4.45, may be specifically modified by controlling the nanotube loading, in fact the sensor sensitivity decreases with increasing the carbon nanotubes amount. Microscale damages resulted directly related to the resistance changes and hence easily detectable in a non-destructive way by means of electrical measurements. In the fatigue tests, the damage is expressed through the presence of a residual resistivity, which increases with the amount of plastic strain accumulated in the matrix

Scanning Nanocalorimetry at High Cooling Rate of Isotactic Polypropylene

A wide set of cooling scans and subsequent melting behavior of isotactic polypropylene (i-PP) were investigated using differential scanning calorimetry and nanocalorimetry at very high cooling rate. The latter technique offers, indeed, the distinctive possibility to perform heat capacity measurements at rates of more than 1000 K/s, both in cooling and in heating, to characterize the crystallization. When the i-PP sample was solidified with cooling rate larger than 160 K/s, a novel enthalpic process was observed that was related to the mesomorphic phase formation. Furthermore, at cooling rates higher than 1000 K/s, the i-PP sample did not crystallize neither in the α nor in the mesomorphic form. The subsequent heating scan starting from −15 °C showed an exothermic event, between 0 and 30 °C, ascribed to the mesophase cold crystallization

Synthesis and characterization of P(MMA-AA) copolymers for targeted oral drug delivery

This paper describes the development of pH-sensitive poly(methyl methacrylate-acrylic acid) copolymers for the enteric coating of pharmaceutical products for oral administration. To obtain the dissolution at the desired pH level, different pH-sensitive polymers are available on the market. Usually, for each desired dissolution pH, an ad hoc polymer is designed. Thus, different dissolution pH values could ask for completely different polymers. Instead, the materials proposed in this work are copolymers of the same two monomers, and the different dissolution pH was obtained by changing the volume fraction of the hydrophobic methyl methacrylate monomer to the hydrophilic acrylic acid monomer. Increasing the volumetric percentage of methyl methacrylate causes the polymer to dissolve at increasing pH, until the dissolution does not take place at all, and it is replaced by a slow swelling phenomenon. The copolymers obtained were characterized by differential scanning calorimetry, in order to evaluate their glass transition temperature, and these latter were related to %MMA. The molecular weights of the pure polymers (PAA, PMMA) were measured by intrinsic viscosity, to further validate the glass transition temperatures observed. The dissolution of the copolymers was carefully tested in buffer solutions for a dense set of pH values. A linear relationship between dissolution pH and volumetric percentage of methyl methacrylate was obtained from these measurements. As a result, for any physiological compartment, the copolymer which dissolves at the pH of interest can be easily synthesized. doi:10.1007/s00289-009-0040-

Shake table testing of a low-impact technology for the seismic protection of stone masonry

This paper presents a novel low-impact technique for the seismic protection of fair-face masonry walls. The proposed strengthening solution involves the use of carbon-fibre reinforced polymer (CFRP) connectors installed from the outside by perforating the stone elements, combined with grout injections. The connectors cover ¾ of the wall thickness, so as to leave the inner surface undisturbed. Once the work is completed, they are also substantially invisible. Shake table tests were carried out under natural accelerograms on two full-scale irregular multi-leaf stone masonry wall specimens. In order to replicate materials and construction technique of the Apennine historical buildings, the prototypes were made from stones recovered from the debris of a settlement in the municipality of Accumoli (RI, Italy), and the mortar was designed to reproduce lime-poor mortars surveyed in the field. The experimental setup was designed to induce out-of-plane vertical bending under base seismic motion, while allowing the vertical displacement of the wall top. One specimen was tested “as-built” and the other one was tested strengthened, to investigate the gain in seismic performance, the limitation of progressive damage accumulation and the effects on dynamic properties

application of externally bonded inorganic matrix composites to existing masonry structures

Fabric-reinforced cementitious matrix (FRCM) and composite-reinforced mortar (CRM) are recently introduced inorganic-matrix composites that have shown promising results as externally bonded reinforcement (EBR) of existing masonry structures. FRCM and CRM comprised high-strength fiber textiles embedded within inorganic matrices. Different fibers and matrices can be used, which lead to a large number of systems characterized by different properties. In this paper, different techniques employed to strengthen the existing masonry structures with EBR. FRCM and CRM composites are presented and discussed

Interactive Exhibits for Geophysical Education: Uncovering the Secrets of the Earth

The Educational & Outreach Group of the Istituto Nazionale di Geofisica e Vulcanologia (INGV, Rome, Italy) designed a portable museum to bring on the road educational activities focused on the understanding of geomagnetism, plate tectonics, seismology and seismic hazard. Here the main experiments, models and exhibits which have been successfully installed in Genoa for the Science Festival (2003, 2004) and in Rome (2005) with enthusiastic audience participation are shown.Published375-3815.8. TTC - Formazione e informazioneN/A or not JCRope

PAMELA results on the cosmic-ray antiproton flux from 60 MeV to 180 GeV in kinetic energy

The satellite-borne experiment PAMELA has been used to make a new measurement of the cosmic-ray antiproton flux and the antiproton-to-proton flux ratio which extends previously published measurements down to 60 MeV and up to 180 GeV in kinetic energy. During 850 days of data acquisition approximately 1500 antiprotons were observed. The measurements are consistent with purely secondary production of antiprotons in the galaxy. More precise secondary production models are required for a complete interpretation of the results.Comment: 11 pages, 3 figures, 1 table. Accepted for publication in Physical Review Letter

Repair of composite-to-masonry bond using flexible matrix

The paper presents an experimental investigation on an innovative repair method, in which composite reinforcements, after debonding, are re-bonded to the substrate using a highly deformable polymer. In order to assess the effectiveness of this solution, shear bond tests were carried out on brick and masonry substrates within two Round Robin Test series organized within the RILEM TC 250-CSM: Composites for Sustainable strengthening of Masonry. Five laboratories from Italy, Poland and Portugal were involved. The shear bond performance of the reinforcement systems before and after repair were compared in terms of ultimate loads, load-displacement curves and strain distributions. The results showed that the proposed repair method may provide higher strength and ductility than stiff epoxy resins, making it an effective and cost efficient technique for several perspective structural applications