Effects of seagrasses and algae of the Caulerpa family on hydrodynamics and particle-trapping rates

The widespread decline of seagrass beds within the Mediterranean often results in the replacement of seagrasses by opportunistic green algae of the Caulerpa family. Because Caulerpa beds have a different height, stiffness and density compared to seagrasses, these changes in habitat type modify the interaction of the seafloor with hydrodynamics, influencing key processes such as sediment resuspension and particle trapping. Here, we compare the effects on hydrodynamics and particle trapping of Caulerpa taxifolia, C. racemosa, and C. prolifera with the Mediterranean seagrasses Cymodocea nodosa and Posidonia oceanica. All macrophyte canopies reduced near-bed volumetric flow rates compared to bare sediment, vertical profiles of turbulent kinetic energy revealed peak values around the top of the canopies, and maximum values of Reynolds stress increased by a factor of between 1.4 (C. nodosa) and 324.1 (P. oceanica) when vegetation was present. All canopies enhanced particle retention rates compared to bare sediment. The experimental C. prolifera canopy was the most effective at particle retention (m2 habitat); however, C. racemosa had the largest particle retention capacity per structure surface area. Hence, in terms of enhancing particle trapping and reducing hydrodynamic forces at the sediment surface, Caulerpa beds provided a similar or enhanced function compared to P.oceanica and C. nodosa. However, strong seasonality in the leaf area index of C. racemosa and C. taxifolia within the Mediterranean, combined with a weak rhizome structure, suggests that sediments maybe unprotected during winter storms, when most erosion occurs. Hence, replacement of seagrass beds with Caulerpa is likely to have a major influence on annual sediment dynamics at ecosystem scales.This research was funded by the European Network of Excellence ‘‘Marine Biodiversity and Ecosystem Function’’ (MarBEF); FP6, EC contract no. 505446 and a grant from the Fundacio ´n BBVA. EPM was supported by a European Union Marie Curie host fellowship for transfer of knowledge, MTKD-CT-2004-509254, the Spanish national project EVAMARIA (CTM2005-00395/MAR) and the regional government of Andalusia project FUNDIV(P07-RNM-2516)

Washing load influences the microplastic release from polyester fabrics by affecting wettability and mechanical stress

AbstractMicroplastics released from textiles during the washing process represent the most prevalent type of microparticles found in different environmental compartments and ecosystems around the world. Release of microfibres during the washing process of synthetic textiles is due to the mechanical and chemical stresses that clothes undergo in washing machines. Several washing process parameters, conditions, formulations of laundering additives have been correlated to microfibre release and some of them have been identified to affect microfibre release during washing process, while no correlation has been evaluated between microfibre release and washing load. In the present study, microfibre release was evaluated as function of the washing load in a real washing process, indicating a progressive decrease of microfibre release with increasing washing load. The quantity of released microfibres increased by around 5 times by decreasing the washing load due to a synergistic effect between water-volume to fabric ratio and mechanical stress during washing. Moreover, the higher mechanical stress to which the fabric is subjected in the case of a low washing load, hinders the discrimination of the effect on the release of other washing parameters like the type of detergent and laundry additives used.</jats:p

Search for new phenomena with the MT2 variable in the all-hadronic final state produced in proton-proton collisions at s=13 TeV.

A search for new phenomena is performed using events with jets and significant transverse momentum imbalance, as inferred through the MT2 variable. The results are based on a sample of proton-proton collisions collected in 2016 at a center-of-mass energy of 13 TeV with the CMS detector and corresponding to an integrated luminosity of 35.9 fb-1 . No excess event yield is observed above the predicted standard model background, and the results are interpreted as exclusion limits at 95% confidence level on the masses of predicted particles in a variety of simplified models of R-parity conserving supersymmetry. Depending on the details of the model, 95% confidence level lower limits on the gluino (light-flavor squark) masses are placed up to 2025 (1550) GeV . Mass limits as high as 1070 (1175) GeV are set on the masses of top (bottom) squarks. Information is provided to enable re-interpretation of these results, including model-independent limits on the number of non-standard model events for a set of simplified, inclusive search regions

Studies of Bs2∗(5840)0 and Bs1(5830)0 mesons including the observation of the Bs2∗(5840)0→B0KS0 decay in proton-proton collisions at s=8TeV.

Measurements of Bs2∗(5840)0 and Bs1(5830)0 mesons are performed using a data sample of proton-proton collisions corresponding to an integrated luminosity of , collected with the CMS detector at the LHC at a centre-of-mass energy of 8TeV . The analysis studies P-wave Bs0 meson decays into B(∗)+K- and B(∗)0KS0 , where the B+ and B0 mesons are identified using the decays B+→J/ψK+ and B0→J/ψK∗(892)0 . The masses of the P-wave Bs0 meson states are measured and the natural width of the Bs2∗(5840)0 state is determined. The first measurement of the mass difference between the charged and neutral B∗ mesons is also presented. The Bs2∗(5840)0 decay to B0KS0 is observed, together with a measurement of its branching fraction relative to the Bs2∗(5840)0→B+K- decay