Rapid fabrication and characterization of sine wave targets

The effect of surface perturbations on Inertial Confinement Fusion target performance is currently being researched at Los Alamos National Laboratory (LANL). These perturbations can cause hydrodynamic instabilities which in turn reduce the targets` yield. To systematically measure the growth of these instabilities requires targets to be produced which have perturbations of a known amplitude and spatial frequency. The authors have recently assembled hardware onto one of their diamond turning lathes which enables them to machine and measure these sine waves in about 15 minutes. This is a significant reduction in time from the two and one half hours required by the previous method. This paper discusses the hardware, how it works, and how well the system is working for them to produce these targets

Polarization transfer in the 4^{4}He(e⃗,e′p⃗3(\vec{e},e' \vec{p}^{3}H reaction

Polarization transfer in the 4He(e,e'p)3H reaction at a Q^2 of 0.4 (GeV/c)^2 was measured at the Mainz Microtron MAMI. The ratio of the transverse to the longitudinal polarization components of the ejected protons was compared with the same ratio for elastic ep scattering. The results are consistent with a recent fully relativistic calculation which includes a predicted medium modification of the proton form factor based on a quark-meson coupling model.Comment: 5 pages, Latex, 2 postscript figures, submitted to Physics Letters

Computational Nuclear Physics and Post Hartree-Fock Methods

We present a computational approach to infinite nuclear matter employing Hartree-Fock theory, many-body perturbation theory and coupled cluster theory. These lectures are closely linked with those of chapters 9, 10 and 11 and serve as input for the correlation functions employed in Monte Carlo calculations in chapter 9, the in-medium similarity renormalization group theory of dense fermionic systems of chapter 10 and the Green's function approach in chapter 11. We provide extensive code examples and benchmark calculations, allowing thereby an eventual reader to start writing her/his own codes. We start with an object-oriented serial code and end with discussions on strategies for porting the code to present and planned high-performance computing facilities.Comment: 82 pages, to appear in Lecture Notes in Physics (Springer), "An advanced course in computational nuclear physics: Bridging the scales from quarks to neutron stars", M. Hjorth-Jensen, M. P. Lombardo, U. van Kolck, Editor

Construction of plant transformation vectors carrying beet necrotic yellow vein virus coat protein gene (ii)- plant transformation

Fragments containing the coat protein gene of beet necrotic yellow vein virus were cloned in two plant transformation vectors: pCAMBIA3301M with the bar gene as selectable marker, and pCAMBIA1304M, with resistance to hygromycin. Three constructs were made of each vector: CPL, containing coat protein gene with leader sequence; CPS with coat protein gene, and CPSas with coat protein gene in antisense orientation. Vectors pC3301MCPL, pC3301MCPS. and pC3301MCPSas were used in Agrobacterium—mediated transformation of Nicotiana tabacum (tobacco), Nicotiana excelsior and Nicotiana benthamiana. Regenerants that developed roots on selective media were tested for the presence of CP fragments and the bar gene, but most regenerants were nontransformed (50-83% escapes). After all rooted plants had been selfed, and T1 seed germinated on selective media, only plants descending from one N. excelsior regenerant transformed with pC3301MCPS were positive for presence of bar gene and CPS fragment. Tobacco and Nicotiana benthamiana were transformed with constructs pC1304MCPS and pC1304MCPSas. Transformation efficiency was much higher and approximately 50% of regenerants that rooted on media with 20 mg l−1 hygromycin were positive for the presence of CP fragments. All T1 plants were positive for presence of CP fragments

First -decay spectroscopy of and new -decay branches of

19 pags., 14 figs., 3 tabs.The  decay of the neutron-rich and was investigated experimentally in order to provide new insights into the nuclear structure of the tin isotopes with magic proton number above the shell. The -delayed -ray spectroscopy measurement was performed at the ISOLDE facility at CERN, where indium isotopes were selectively laser-ionized and on-line mass separated. Three -decay branches of were established, two of which were observed for the first time. Population of neutron-unbound states decaying via rays was identified in the two daughter nuclei of and , at excitation energies exceeding the neutron separation energy by 1 MeV. The -delayed one- and two-neutron emission branching ratios of were determined and compared with theoretical calculations. The -delayed one-neutron decay was observed to be dominant -decay branch of even though the Gamow-Teller resonance is located substantially above the two-neutron separation energy of . Transitions following the  decay of are reported for the first time, including rays tentatively attributed to . In total, six new levels were identified in on the basis of the coincidences observed in the and decays. A transition that might be a candidate for deexciting the missing neutron single-particle state in was observed in both  decays and its assignment is discussed. Experimental level schemes of and are compared with shell-model predictions. Using the fast timing technique, half-lives of the , and levels in were determined. From the lifetime of the state measured for the first time, an unexpectedly large transition strength was deduced, which is not reproduced by the shell-model calculations.M.P.-S. acknowledges the funding support from the Polish National Science Center under Grants No. 2019/33/N/ST2/03023 and No. 2020/36/T/ST2/00547 (Doctoral scholarship ETIUDA). J.B. acknowledges support from the Universidad Complutense de Madrid under the Predoctoral Grant No. CT27/16- CT28/16. This work was partially funded by the Polish National Science Center under Grants No. 2020/39/B/ST2/02346, No. 2015/18/E/ST2/00217, and No. 2015/18/M/ST2/00523, by the Spanish government via Projects No. FPA2017-87568-P, No. RTI2018-098868-B-I00, No. PID2019-104390GB-I00, and No. PID2019-104714GB-C21, by the U.K. Science and Technology Facilities Council (STFC), the German BMBF under Contract No. 05P18PKCIA, by the Portuguese FCT under the Projects No. CERN/FIS-PAR/0005/2017, and No. CERN/FIS-TEC/0003/2019, and by the Romanian IFA Grant CERN/ISOLDE. The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 654002. M.Str. acknowledges the funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 771036 (ERC CoG MAIDEN). J.P. acknowledges support from the Academy of Finland (Finland) with Grant No. 307685. Work at the University of York was supported under STFC Grants No. ST/L005727/1 and No. ST/P003885/1

Velocity-space sensitivity of the time-of-flight neutron spectrometer at JET

The velocity-space sensitivities of fast-ion diagnostics are often described by so-called weight functions. Recently, we formulated weight functions showing the velocity-space sensitivity of the often dominant beam-target part of neutron energy spectra. These weight functions for neutron emission spectrometry (NES) are independent of the particular NES diagnostic. Here we apply these NES weight functions to the time-of-flight spectrometer TOFOR at JET. By taking the instrumental response function of TOFOR into account, we calculate time-of-flight NES weight functions that enable us to directly determine the velocity-space sensitivity of a given part of a measured time-of-flight spectrum from TOFOR