65,749 research outputs found
Fatigue failure load indicator
An indicator for recording the load at which a fatigue specimen breaks during the last cycle of a fatigue test is described. A load cell is attached to the specimen which is alternately subjected to tension and compression loads. The output of the load cell which is proportional to the load on the specimen is applied to the input of a peak detector. Each time the specimen is subjected to a compression load, means are provided for applying a positive voltage to the rest of the peak detector to reset it. During the last cycle of the tension load the peak detector measures the maximum load on the specimen. Means are provided for disconnecting the load cell from the peak detector when there is a failure in the specimen
Calibration of Hewlett-Packard network analyzers: A precision viewpoint
Alternative calibration procedures are examined for Hewlett-Packard vector network analyzers which lead to an improved open-circuit capacitance model, and hence, higher measurement accuracy
A study to examine the feasibility of using surface penetrators for mineral exploration
The feasibility of using penetrators in earth applications is examined. Penetrator applications in exploration for mineral resources only is summarized. Instrumentation for future penetrators is described. Portions of this report are incorporated into a more extensive report examining other penetrator applications in exploration for fossil fuels, geothermal resources, and in environmental and engineering problems, which is to be published as a NASA technical publication
Surface and flow field measurements in a symmetric crossing shock wave/turbulent boundary-layer interaction
Results of an experimental investigation of a symmetric crossing shock/turbulent boundary layer interaction are presented for a Mach number of 3.44 and deflection angles of 2, 6, 8, and 9 degrees. The interaction strengths vary from weak to strong enough to cause a large region of separated flow. Measured quantities include surface static pressure (both steady and unsteady) and flowfield Pitot pressures. Pitot profiles in the plane of symmetry through the interaction region are shown for various deflection angles. Oil flow visualization and the results of a trace gas streamline tracking technique are also presented
IECM calibration and data reduction requirements
The induced environment contamination monitor (IECM) tape recorder format, as it relates to the ouput of meaningful data from the IECM instrument, is explained. Eight-bit words (or bytes) generate numbers that represent voltage levels of electronic detection probes for each experiment. This information is amalgamated by the IECM Data Acquisition and Control System (DACS). In some cases bits represent certain status situations concerning an experiment, such as whether a valve is opened or closed. Voltages are transformed into meaningful physical phenomena through equations of calibration. Data formats and plots are generated as requested for each IECM experimenter
The western Wabigoon Subprovince, Superior Province, Canada: Archean greenstone succession in rifted basement complex
The Wabigoon Subprovince, interposed between the predominantly metasedimentary-plutonic and gneissic English River and Quetico Subprovinces to the north and south respectively, exposed Archean greenstone and granitoid rocks for a strike length of greater than 700 km. Based on predominating rock types, the western part of the subprovince is divided into two terrains: the northern Wabigoon volcano-sedimentary and pluonic terrain (NWW) and the Wabigoon Diapiric Axis terrain (WDA). Both the NWW and WDA are described according to volcanic sequence, geological faults, chemical composition and evolutionary history
Progress toward synergistic hypermixing nozzles
Mean flow measurements were obtained for air-to-air mixing downstream of swept and unswept ramp wall mounted hypermixing nozzle configurations. Aside from the sweep of the ramps, the two nozzle configurations studied are identical. The nozzles inject three parallel supersonic jets at a 15 deg angle (relative to the wind tunnel wall) into a supersonic freestream. Mach number and volume fraction distributions in a transverse plane 11.1 nozzle heights downstream from the nozzle exit plane were measured. Data are presented for a freestream Mach number of three at a matched static pressure condition and also at underexpanded static pressure condition (pressure ratio = 5). Surface oil flow visualization was used to study the near wall flow behavior. The results indicate that the swept ramp injectors produce stronger and larger vortex pairs than the unswept ramp injectors. The increased interaction between the swept ramp model's larger vortex pairs yields better mixing characteristics for this model
Determination of spectral signatures of substances in natural waters
Optical remote sensing of water pollution offers the possibility of fast, large scale coverage at a relatively low cost. The possibility of using the spectral characteristics of the upwelling light from water for the purpose of ocean water quality monitoring was explained. The work was broken into several broad tasks as follows: (1) definition of a remotely measured spectral signature of water, (2) collection of field data and testing of the signature analysis, and (3) the possibility of using LANDSAT data for the identification of substances in water. An attempt to extract spectral signatures of acid waste and sediment was successful
An investigation of the decoupling effects in a magnetic forming beryllium coil assembly
Decoupling effects in magnetic forming beryllium coil assembl
Application of LANDSAT-2 to the Management of Delaware's Marine and Wetland Resources
The author has identified the following significant results. The duPont waste disposal plume was observed in 12 NASA/LANDSAT satellite images during dump up to 54 hours after dump. The circulation processes at the acid waste disposal site are highly event-dominated, with the majority of the water transport occurring strong northeasters. There is a mean flow to the south alongshore. During the warm months, the ocean stratifies with warm water over cold water. During stratified conditions, the near-bottom drogues showed very little movement. LANDSAT, aircraft, and boats were used successfully to study estuarine and coastal fronts or boundaries. By capturing and holding oil slicks, frontal systems significantly influence the movement and dispersion of oil slicks in Delaware Bay. Recent oil slick tracking experiments conducted to verify a predictive oil dispersion and movement model have shown that during certain parts of the tidal cycle the oil slicks tend to line up along boundaries
- …