Antitumor activity of the tea polyphenol epigallocatechin-3-gallate encapsulated in targeted vesicles after intravenous administration

The therapeutic potential of epigallocatechin gallate, a green tea polyphenol with anti-cancer properties, is limited by its inability to specifically reach tumors following intravenous administration. The purpose of this study is to determine whether a tumor-targeted vesicular formulation of epigallocatechin gallate would suppress the growth of A431 epidermoid carcinoma and B16-F10 melanoma in vitro and in vivo. Transferrin-bearing vesicles encapsulating epigallocatechin gallate were intravenously administered to mice bearing subcutaneous A431 and B16-F10 tumors. The intravenous administration of epigallocatechin gallate encapsulated in transferrin-bearing vesicles resulted in tumor suppression for 40% of A431 and B16-F10 tumors. Animal survival was improved by more than 20 days compared to controls. Encapsulation of epigallocatechin gallate in transferrin-bearing vesicles is a promising therapeutic strategy

Therapeutic efficacy of intravenously administered transferrin-conjugated dendriplexes on prostate carcinomas

Aim: Improved treatments for prostate cancer are critically needed in order to overcome metastasis and lethal recurrence. Intravenously administered gene therapy would be an attractive anticancer treatment strategy; however, the lack of suitable carrier systems able to selectively deliver therapeutic genes to tumors has so far limited this investigation. Given that transferrin receptors are overexpressed on prostate cancer cells, the purpose of this study is to determine whether transferrin-conjugated dendriplexes encoding TNF-α, TNF-related apoptosis-inducing ligand and IL-12 would suppress the growth of prostate cancer cell lines in vitro and in vivo. Materials & methods: Transferrin-conjugated dendriplexes encoding TNF-α, TNF-related apoptosis-inducing ligand and IL-12 were intravenously administered to mice bearing subcutaneous PC-3 and DU145 tumors. Results: The administration of the transferrin-conjugated generation 3 diaminobutyric polypropylenimine dendriplex encoding TNF-α resulted in tumor suppression for 60% of PC-3 and 50% of DU145 prostate tumors. Conclusion: These dendriplexes hold great potential as a novel approach for prostate cancer therapy

Hepatitis B virus infected physicians and disclosure of transmission risks to patients: A critical analysis

BACKGROUND: The potential for transmission of blood-borne pathogens such as hepatitis B virus from infected healthcare workers to patients is an important and difficult issue facing healthcare policymakers internationally. Law and policy on the subject is still in its infancy, and subject to a great degree of uncertainty and controversy. Policymakers have made few recommendations regarding the specifics of practice restriction for health care workers who are hepatitis B seropositive. Generally, they have deferred this work to vaguely defined "expert panels" which will have the power to dictate the conditions under which infected health care workers may continue to practice. DISCUSSION: In this paper we use recent Canadian policy statements as a critical departure point to propose more specific recommendations regarding disclosure of transmission risks in a way that minimizes practice restriction of hepatitis B seropositive health care workers without compromising patient safety. The range of arguments proposed in the literature are critically examined from the perspective of ethical analysis. SUMMARY: A process for considering the ethical implications of the disclosure of the sero-status of health care workers is advanced that considers the varied perspectives of different stakeholders

Bacterially assembled biopolyester nanobeads for removing cadmium from water

Cadmium (Cd)-contaminated waterbodies are a worldwide concern for the environment, impacting human health. To address the need for efficient, sustainable and cost-effective remediation measures, we developed innovative Cd bioremediation agents by engineering Escherichia coli to assemble poly(3-hydroxybutyric acid) (PHB) beads densely coated with Cd-binding peptides. This was accomplished by translational fusion of Cd-binding peptides to the N- or C-terminus of a PHB synthase that catalyzes PHB synthesis and mediates assembly of Cd2 or Cd1 coated PHB beads, respectively. Cd1 beads showed greater Cd adsorption with 441 nmol Cd mg-1 bead mass when compared to Cd2 beads (334 nmol Cd mg-1 bead-mass) and plain beads (238 nmol Cd mg-1 bead-mass). The Cd beads were not ecotoxic and did attenuate Cd-spiked solutions toxicity. Overall, the bioengineered beads provide a means to remediate Cd-contaminated sites, can be cost-effectively produced at large scale, and offer a biodegradable and safe alternative to synthetic ecotoxic treatments.publishe

Shattered pellet injection experiments at JET in support of the ITER disruption mitigation system design

A series of experiments have been executed at JET to assess the efficacy of the newly installed shattered pellet injection (SPI) system in mitigating the effects of disruptions. Issues, important for the ITER disruption mitigation system, such as thermal load mitigation, avoidance of runaway electron (RE) formation, radiation asymmetries during thermal quench mitigation, electromagnetic load control and RE energy dissipation have been addressed over a large parameter range. The efficiency of the mitigation has been examined for the various SPI injection strategies. The paper summarises the results from these JET SPI experiments and discusses their implications for the ITER disruption mitigation scheme

The role of ETG modes in JET-ILW pedestals with varying levels of power and fuelling

We present the results of GENE gyrokinetic calculations based on a series of JET-ITER-like-wall (ILW) type I ELMy H-mode discharges operating with similar experimental inputs but at different levels of power and gas fuelling. We show that turbulence due to electron-temperature-gradient (ETGs) modes produces a significant amount of heat flux in four JET-ILW discharges, and, when combined with neoclassical simulations, is able to reproduce the experimental heat flux for the two low gas pulses. The simulations plausibly reproduce the high-gas heat fluxes as well, although power balance analysis is complicated by short ELM cycles. By independently varying the normalised temperature gradients (omega(T)(e)) and normalised density gradients (omega(ne )) around their experimental values, we demonstrate that it is the ratio of these two quantities eta(e) = omega(Te)/omega(ne) that determines the location of the peak in the ETG growth rate and heat flux spectra. The heat flux increases rapidly as eta(e) increases above the experimental point, suggesting that ETGs limit the temperature gradient in these pulses. When quantities are normalised using the minor radius, only increases in omega(Te) produce appreciable increases in the ETG growth rates, as well as the largest increases in turbulent heat flux which follow scalings similar to that of critical balance theory. However, when the heat flux is normalised to the electron gyro-Bohm heat flux using the temperature gradient scale length L-Te, it follows a linear trend in correspondence with previous work by different authors

Testing a prediction model for the H-mode density pedestal against JET-ILW pedestals

The neutral ionisation model proposed by Groebner et al (2002 Phys. Plasmas 9 2134) to determine the plasma density profile in the H-mode pedestal, is extended to include charge exchange processes in the pedestal stimulated by the ideas of Mahdavi et al (2003 Phys. Plasmas 10 3984). The model is then tested against JET H-mode pedestal data, both in a 'standalone' version using experimental temperature profiles and also by incorporating it in the Europed version of EPED. The model is able to predict the density pedestal over a wide range of conditions with good accuracy. It is also able to predict the experimentally observed isotope effect on the density pedestal that eludes simpler neutral ionization models

Interpretative and predictive modelling of Joint European Torus collisionality scans

Transport modelling of Joint European Torus (JET) dimensionless collisionality scaling experiments in various operational scenarios is presented. Interpretative simulations at a fixed radial position are combined with predictive JETTO simulations of temperatures and densities, using the TGLF transport model. The model includes electromagnetic effects and collisions as well as □(→┬E ) X □(→┬B ) shear in Miller geometry. Focus is on particle transport and the role of the neutral beam injection (NBI) particle source for the density peaking. The experimental 3-point collisionality scans include L-mode, and H-mode (D and H and higher beta D plasma) plasmas in a total of 12 discharges. Experimental results presented in (Tala et al 2017 44th EPS Conf.) indicate that for the H-mode scans, the NBI particle source plays an important role for the density peaking, whereas for the L-mode scan, the influence of the particle source is small. In general, both the interpretative and predictive transport simulations support the experimental conclusions on the role of the NBI particle source for the 12 JET discharges

New H-mode regimes with small ELMs and high thermal confinement in the Joint European Torus

New H-mode regimes with high confinement, low core impurity accumulation, and small edge-localized mode perturbations have been obtained in magnetically confined plasmas at the Joint European Torus tokamak. Such regimes are achieved by means of optimized particle fueling conditions at high input power, current, and magnetic field, which lead to a self-organized state with a strong increase in rotation and ion temperature and a decrease in the edge density. An interplay between core and edge plasma regions leads to reduced turbulence levels and outward impurity convection. These results pave the way to an attractive alternative to the standard plasmas considered for fusion energy generation in a tokamak with a metallic wall environment such as the ones expected in ITER.& nbsp;Published under an exclusive license by AIP Publishing

Comparing pedestal structure in JET-ILW H-mode plasmas with a model for stiff ETG turbulent heat transport

A predictive model for the electron temperature profile of the H-mode pedestal is described, and its results are compared with the pedestal structure of JET-ILW plasmas. The model is based on a scaling for the gyro-Bohm normalized, turbulent electron heat flux qe/qe,gB resulting from electron temperature gradient (ETG) turbulence, derived from results of nonlinear gyrokinetic (GK) calculations for the steep gradient region. By using the local temperature gradient scale length L-Te in the normalization, the dependence of q(e)/q(e,g)B on the normalized gradients R/L-Te and R/(Lne) can be represented by a unified scaling with the parameter eta(e) = L-ne/L-Te, to which the linear stability of ETG turbulence is sensitive when the density gradient is sufficiently steep. For a prescribed density profile, the value of R/L-Te determined from this scaling, required to maintain a constant electron heat flux qe across the pedestal, is used to calculate the temperature profile. Reasonable agreement with measurements is found for different cases, the model providing an explanation of the relative widths and shifts of the T-e and n(e) profiles, as well as highlighting the importance of the separatrix boundary conditions. Other cases showing disagreement indicate conditions where other branches of turbulence might dominate.This article is part of a discussion meeting issue "H-mode transition and pedestal studies in fusion plasmas'