852 research outputs found
Liquid Oxygen/Liquid Methane Ascent Main Engine Technology Development
The National Aeronautics & Space Administration (NASA) has identified Liquid Oxygen (LO2)/Liquid Methane (LCH4) as a potential propellant combination for future space vehicles based upon the Exploration Systems Architecture Study (ESAS). The technology is estimated to have higher performance and lower overall systems mass compared to existing hypergolic propulsion systems. The current application considering this technology is the lunar ascent main engine (AME). AME is anticipated to be an expendable, pressure-fed engine to provide ascent from the moon at the completion of a 210 day lunar stay. The engine is expected to produce 5,500 lbf (24,465 N) thrust with variable inlet temperatures due to the cryogenic nature of the fuel and oxidizer. The primary technology risks include establishing reliable and robust ignition in vacuum conditions, maximizing specific impulse, developing rapid start capability for the descent abort, providing the capability for two starts and producing a total engine bum time over 500 seconds. This paper will highlight the efforts of the Marshall Space Flight Center (MSFC) in addressing risk reduction activities for this technology
Impact of the SARS-CoV-2 pandemic on access to contraception and pregnancy intentions: a national prospective cohort study of the UK population
OBJECTIVE: Evaluate the impact of the COVID-19 pandemic on access to contraception and pregnancy intentions. DESIGN: Nationwide prospective cohort study. SETTING: United Kingdom. PARTICIPANTS: Women in the UK who were pregnant between 24 May and 31 December 2020. MAIN OUTCOME MEASURES: Access to contraception and level of pregnancy intentions, using the London Measure of Unplanned Pregnancy (LMUP) in women whose last menstrual period was before or after 1 April 2020. While the official date of the first UK lockdown was 23 March, we used 1 April to ensure that those in the post-lockdown group would have faced restrictions in the month that they conceived. RESULTS: A total of 9784 women enrolled in the cohort: 4114 (42.0%) conceived pre-lockdown and 5670 (58.0%) conceived post-lockdown. The proportion of women reporting difficulties accessing contraception was higher in those who conceived after lockdown (n=366, 6.5% vs n=25, 0.6%, p<0.001) and continued to rise from March to September 2020. After adjusting for confounders, women were nine times more likely to report difficulty accessing contraception after lockdown (adjusted odds ratio (aOR) 8.96, 95% CI 5.89 to 13.63, p<0.001). There is a significant difference in the levels of pregnancy planning, with higher proportions of unplanned (n=119, 2.1% vs n=55, 1.3%) and ambivalent pregnancies (n=1163, 20.5% vs n=663, 16.1%) and lower proportions of planned pregnancies (n=4388, 77.4% vs n=3396, 82.5%) in the post-lockdown group (p<0.001). After adjusting for confounders, women who conceived after lockdown were still significantly less likely to have a planned pregnancy (aOR 0.88, 95% CI 0.79 to 0.98, p=0.025). CONCLUSIONS: Access to contraception in the UK has become harder during the COVID-19 pandemic and the proportion of unplanned pregnancies has almost doubled
Joint Eglin Acoustics Week 2013 Data Report
Far-field acoustic measurements were obtained for the AH-64D, HH-60M and CV-22B at the Eglin AFB, Test Area C-72, in July/August 2013. The primary purpose for this flight test was to obtain a benchmark database of detailed acoustic source noise characteristics for the aircraft operating at typical mission gross weights over a range of typical mission operating conditions. Data were acquired for a range of steady-state level and descending flight conditions, hover, and a variety of unsteady maneuver conditions. Between 30 and 37 microphones were deployed during these tests. Vehicle position and state data, as well as weather data were acquired simultaneously with the acoustic data. This paper describes the test aircraft, onboard instrumentation, ground instrumentation, and the data acquired. Data from this test are available upon request and review
Impedance spectroscopy characterization of neutron irradiated thermoelectric modules for space nuclear power
The European Space Agency is currently supporting the research and development of advanced radioisotope power systems utilising thermoelectric modules. The performance of thermoelectric modules following exposure to neutron radiation is of significant interest due to the likely application of radioisotope thermoelectric generators in deep space exploration or planetary landers requiring prolonged periods of operation. This study utilises impedance spectroscopy to characterise the effects of neutron irradiation on the performance of complete thermoelectric modules, as opposed to standalone material. For a 50 We americium-241 radioisotope thermoelectric generator design, it is estimated that the TE modules could be exposed to a total integrated flux of approximately 5 × 1013 neutrons cm-2 (>1 MeV). In this study, an equivalent neutron dose was simulated experimentally via an acute 2-hour exposure in a research pool reactor. Bi2Te3-based thermoelectric modules with different leg aspect ratios and microstructures were investigated. Gamma-ray spectroscopy was initially used to identify activated radionuclides and hence quantify irradiation induced transmutation doping. To evaluate the thermoelectric properties pre- and post-irradiation, impedance spectroscopy characterization was employed. Isochronal thermal annealing of defects imparted by the irradiation process, revealed that polycrystalline based modules required significantly higher temperature than those with a monolithic microstructure. Whilst this may indicate a greater susceptibility to neutron irradiation, all tested modules demonstrated sufficient radiation hardness for use within an americium-241 radioisotope thermoelectric generator. Furthermore, the work reported demonstrates that impedance spectroscopy is a highly capably diagnostic tool for characterising the in-service degradation of complete thermoelectric devices
Inference with interference between units in an fMRI experiment of motor inhibition
An experimental unit is an opportunity to randomly apply or withhold a
treatment. There is interference between units if the application of the
treatment to one unit may also affect other units. In cognitive neuroscience, a
common form of experiment presents a sequence of stimuli or requests for
cognitive activity at random to each experimental subject and measures
biological aspects of brain activity that follow these requests. Each subject
is then many experimental units, and interference between units within an
experimental subject is likely, in part because the stimuli follow one another
quickly and in part because human subjects learn or become experienced or
primed or bored as the experiment proceeds. We use a recent fMRI experiment
concerned with the inhibition of motor activity to illustrate and further
develop recently proposed methodology for inference in the presence of
interference. A simulation evaluates the power of competing procedures.Comment: Published by Journal of the American Statistical Association at
http://www.tandfonline.com/doi/full/10.1080/01621459.2012.655954 . R package
cin (Causal Inference for Neuroscience) implementing the proposed method is
freely available on CRAN at https://CRAN.R-project.org/package=ci
The domestication of SARS-CoV-2 into a seasonal infection by viral variants
IntroductionThe COVID-19 pandemic was caused by the zoonotic betacoronavirus SARS-CoV-2. SARS-CoV-2 variants have emerged due to adaptation in humans, shifting SARS-CoV-2 towards an endemic seasonal virus. We have termed this process ‘virus domestication’.MethodsWe analyzed aggregate COVID-19 data from a publicly funded healthcare system in Canada from March 7, 2020 to November 21, 2022. We graphed surrogate calculations of COVID-19 disease severity and SARS-CoV-2 variant plaque sizes in tissue culture.Results and DiscussionMutations in SARS-CoV-2 adapt the virus to better infect humans and evade the host immune response, resulting in the emergence of variants with altered pathogenicity. We observed a decrease in COVID-19 disease severity surrogates after the arrival of the Delta variant, coinciding with significantly smaller plaque sizes. Overall, we suggest that SARS-CoV-2 has become more infectious and less virulent through viral domestication. Our findings highlight the importance of SARS-CoV-2 vaccination and help inform public policy on the highest probability outcomes during viral pandemics
AT Cnc: A Second Dwarf Nova with a Classical Nova Shell
We are systematically surveying all known and suspected Z Cam-type dwarf
novae for classical nova shells. This survey is motivated by the discovery of
the largest known classical nova shell, which surrounds the archetypal dwarf
nova Z Camelopardalis. The Z Cam shell demonstrates that at least some dwarf
novae must have undergone classical nova eruptions in the past, and that at
least some classical novae become dwarf novae long after their nova
thermonuclear outbursts, in accord with the hibernation scenario of cataclysmic
binaries. Here we report the detection of a fragmented "shell", 3 arcmin in
diameter, surrounding the dwarf nova AT Cancri. This second discovery
demonstrates that nova shells surrounding Z Cam-type dwarf novae cannot be very
rare. The shell geometry is suggestive of bipolar, conical ejection seen nearly
pole-on. A spectrum of the brightest AT Cnc shell knot is similar to that of
the ejecta of the classical nova GK Per, and of Z Cam, dominated by [NII]
emission. Galex FUV imagery reveals a similar-sized, FUV-emitting shell. We
determine a distance of 460 pc to AT Cnc, and an upper limit to its ejecta mass
of ~ 5 x 10^{-5} Msun, typical of classical novae.Comment: 17 pages, 6 figures, submitted to AJ. arXiv admin note: text overlap
with arXiv:1205.353
Methyl mercury dynamics in a tidal wetland quantified using in situ optical measurements
Author Posting. © American Society of Limnology and Oceanography, 2011. This article is posted here by permission of American Society of Limnology and Oceanography for personal use, not for redistribution. The definitive version was published in Limnology and Oceanography 56 (2011): 1355-1371, doi:10.4319/lo.2011.56.4.1355.We assessed monomethylmercury (MeHg) dynamics in a tidal wetland over three seasons using a novel method that employs a combination of in situ optical measurements as concentration proxies. MeHg concentrations measured over a single spring tide were extended to a concentration time series using in situ optical measurements. Tidal fluxes were calculated using modeled concentrations and bi-directional velocities obtained acoustically. The magnitude of the flux was the result of complex interactions of tides, geomorphic features, particle sorption, and random episodic events such as wind storms and precipitation. Correlation of dissolved organic matter quality measurements with timing of MeHg release suggests that MeHg is produced in areas of fluctuating redox and not limited by buildup of sulfide. The wetland was a net source of MeHg to the estuary in all seasons, with particulate flux being much higher than dissolved flux, even though dissolved concentrations were commonly higher. Estimated total MeHg yields out of the wetland were approximately 2.5 µg m−2 yr−1—4–40 times previously published yields—representing a potential loading to the estuary of 80 g yr−1, equivalent to 3% of the river loading. Thus, export from tidal wetlands should be included in mass balance estimates for MeHg loading to estuaries. Also, adequate estimation of loads and the interactions between physical and biogeochemical processes in tidal wetlands might not be possible without long-term, high-frequency in situ measurements.This work was supported by funding from the California Bay
Delta Authority Ecosystem Restoration and Drinking Water
Programs (grant ERP-00-G01) and matching funds from the U.S.
Geological Survey Cooperative Research Program
- …