159 research outputs found

    2D perovskite stabilized phase-pure formamidinium perovskite solar cells.

    Get PDF
    Compositional engineering has been used to overcome difficulties in fabricating high-quality phase-pure formamidinium perovskite films together with its ambient instability. However, this comes alongside an undesirable increase in bandgap that sacrifices the device photocurrent. Here we report the fabrication of phase-pure formamidinium-lead tri-iodide perovskite films with excellent optoelectronic quality and stability. Incorporation of 1.67 mol% of 2D phenylethylammonium lead iodide into the precursor solution enables the formation of phase-pure formamidinium perovskite with an order of magnitude enhanced photoluminescence lifetime. The 2D perovskite spontaneously forms at grain boundaries to protect the formamidinium perovskite from moisture and suppress ion migration. A stabilized power conversion efficiency (PCE) of 20.64% (certified stabilized PCE of 19.77%) is achieved with a short-circuit current density exceeding 24 mA cm-2 and an open-circuit voltage of 1.130 V, corresponding to a loss-in-potential of 0.35 V, and significantly enhanced operational stability

    Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells.

    Get PDF
    Manipulation of grain boundaries in polycrystalline perovskite is an essential consideration for both the optoelectronic properties and environmental stability of solar cells as the solution-processing of perovskite films inevitably introduces many defects at grain boundaries. Though small molecule-based additives have proven to be effective defect passivating agents, their high volatility and diffusivity cannot render perovskite films robust enough against harsh environments. Here we suggest design rules for effective molecules by considering their molecular structure. From these, we introduce a strategy to form macromolecular intermediate phases using long chain polymers, which leads to the formation of a polymer-perovskite composite cross-linker. The cross-linker functions to bridge the perovskite grains, minimizing grain-to-grain electrical decoupling and yielding excellent environmental stability against moisture, light, and heat, which has not been attainable with small molecule defect passivating agents. Consequently, all photovoltaic parameters are significantly enhanced in the solar cells and the devices also show excellent stability

    Compact high-quality CdSe–CdS core–shell nanocrystals with narrow emission linewidths and suppressed blinking

    Get PDF
    High particle uniformity, high photoluminescence quantum yields, narrow and symmetric emission spectral lineshapes and minimal single-dot emission intermittency (known as blinking) have been recognized as universal requirements for the successful use of colloidal quantum dots in nearly all optical applications. However, synthesizing samples that simultaneously meet all these four criteria has proven challenging. Here, we report the synthesis of such high-quality CdSe–CdS core–shell quantum dots in an optimized process that maintains a slow growth rate of the shell through the use of octanethiol and cadmium oleate as precursors. In contrast with previous observations, single-dot blinking is significantly suppressed with only a relatively thin shell. Furthermore, we demonstrate the elimination of the ensemble luminescence photodarkening that is an intrinsic consequence of quantum dot blinking statistical ageing. Furthermore, the small size and high photoluminescence quantum yields of these novel quantum dots render them superior in vivo imaging agents compared with conventional quantum dots. We anticipate these quantum dots will also result in significant improvement in the performance of quantum dots in other applications such as solid-state lighting and illumination.National Institutes of Health (U.S.) (Grant 5-U54-CA119349)National Institutes of Health (U.S.) (Grant 5R01CA126642)Massachusetts Institute of Technology. Institute for Soldier Nanotechnologies (W911NF-07-D-0004)National Science Foundation (U.S.) (Collaborative Research in Chemistry Program CHE-0714189)National Science Foundation (U.S.) (Award DMR-08-19762)National Science Foundation (U.S.) (Grant CHE-9808061)National Science Foundation (U.S.) (Grant DBI-9729592

    Quantum dot/antibody conjugates for in vivo cytometric imaging in mice

    Get PDF
    Multiplexed, phenotypic, intravital cytometric imaging requires novel fluorophore conjugates that have an appropriate size for long circulation and diffusion and show virtually no nonspecific binding to cells/serum while binding to cells of interest with high specificity. In addition, these conjugates must be stable and maintain a high quantum yield in the in vivo environments. Here, we show that this can be achieved using compact (~15 nm in hydrodynamic diameter) and biocompatible quantum dot (QD) -Ab conjugates. We developed these conjugates by coupling whole mAbs to QDs coated with norbornene-displaying polyimidazole ligands using tetrazine–norbornene cycloaddition. Our QD immunoconstructs were used for in vivo single-cell labeling in bone marrow. The intravital imaging studies using a chronic calvarial bone window showed that our QD-Ab conjugates diffuse into the entire bone marrow and efficiently label single cells belonging to rare populations of hematopoietic stem and progenitor cells (Sca1[superscript +]c-Kit[superscript +] cells). This in vivo cytometric technique may be useful in a wide range of structural and functional imaging to study the interactions between cells and between a cell and its environment in intact and diseased tissues.National Institutes of Health (U.S.) (Grant U54-CA151884)National Institutes of Health (U.S.) (Grant P41-EB015871-26A1)Samsung Scholarship Foundation (Graduate Student Fellowship)Massachusetts Institute of Technology. Institute for Soldier Nanotechnologies (Grant W911NF-07-D-0004

    An Antinuclear Antibody-Negative Patient With Lupus Nephritis

    Get PDF
    Systemic lupus erythematosus (SLE) is a typical autoimmune disease that's characterized by various autoantibodies to nuclear and cytoplasmic antigens. The presence of antinuclear antibodies (ANA) in serum is generally considered a decisive diagnostic sign of SLE. However, a small subset of SLE patients who had the typical clinical features of SLE was reported to show persistently negative ANA tests. Our report describes a 16-yr-old female who presented with the clinical manifestations of SLE such as malar rash, photosensitivity, arthritis, lymphopenia, pericarditis and proteinuria. The serum autoantibodies were all negative and renal biopsy showed that the histopathological changes of immune complex mediated the focal segmental necrotizing glomerulonephritis with crescent formation. She was treated with monthly pulse cyclophosphamide along with corticosteroids. During the 2-yr follow-up period, the proteinuria was markedly decreased and all of the ANA and anti-double stranded DNA antibody tests were negative. This case suggests that ANA may not be required in the pathogenesis of lupus nephritis

    Two Methods of Setting Positive End-expiratory Pressure in Acute Lung Injury: An Experimental Computed Tomography Volumetric Study

    Get PDF
    This study was conducted to observe effects of two methods of setting positive end-expiratory pressure (PEEP) based on the pressure-volume (PV) curve. After lung injury was induced by oleic acid in six mongrel adult dogs, the inflation PV curve was traced and the lower inflection point (LIP) was measured. The 'PEEPINF' was defined as LIP+2 cmH2O. After recruitment maneuver to move the lung physiology to the deflation limb of PV curve, decremental PEEP was applied. The lowest level of PEEP that did not result in a significant drop in PaO2 was defined as the 'PEEPDEF'. Arterial blood gases, lung mechanics, hemodynamics, and lung volumes (measured on computed tomography during end-expiratory pause) were measured at PEEP of 0 cmH2O, PEEPINF and PEEPDEF sequentially. The median PEEPINF was 13.4 cm H2O (interquartile range, 12.5-14.3) and median PEEPDEF was 12.0 cm H2O (10.0-16.5) (p=0.813). PEEPDEF was associated with significantly higher PaO2 and lung volumes, and significantly lower shunt fraction and cardiac index when compared to PEEPINF (p<0.05). Setting the PEEP based on the deflation limb of the PV curve was useful in improving oxygenation and lung volumes in a canine lung injury model

    Tip-functionalized carbon nanotubes under electric fields

    Get PDF
    We investigated the electronic structures of chemically modified carbon nanotube tips under electric fields using density functional calculations. Hydrogen, oxygen, and hydroxyl group-terminated nanotubes have been considered as field emitters or probe tips. In the case of the open-ended tubes, the field emission originates primarily from the dangling-bond states localized at the edge, whereas the pentagonal defects are the main source of the field emission in the capped tubes. The open-ended nanotube with a zigzag edge is an efficient field emitter because of the localized electronic states around the Fermi level and the atomic alignment of carbon-carbon bonds along with external electric fields. Tip functionalization alters the local density of states as well as the chemical selectivity of nanotubes in various ways. The correlations between atomic geometries of chemically functionalized tips and their electronic structures are further discussed. We propose that a hydrogen-terminated tube would be a promising probe tip for selective chemical imaging.open252

    The JCMT BISTRO Survey: A Spiral Magnetic Field in a Hub-filament Structure, Monoceros R2

    Get PDF
    We present and analyze observations of polarized dust emission at 850 μm toward the central 1 7 1 pc hub-filament structure of Monoceros R2 (Mon R2). The data are obtained with SCUBA-2/POL-2 on the James Clerk Maxwell Telescope (JCMT) as part of the B-fields in Star-forming Region Observations survey. The orientations of the magnetic field follow the spiral structure of Mon R2, which are well described by an axisymmetric magnetic field model. We estimate the turbulent component of the magnetic field using the angle difference between our observations and the best-fit model of the underlying large-scale mean magnetic field. This estimate is used to calculate the magnetic field strength using the Davis–Chandrasekhar–Fermi method, for which we also obtain the distribution of volume density and velocity dispersion using a column density map derived from Herschel data and the C18O (J = 3 - 2) data taken with HARP on the JCMT, respectively. We make maps of magnetic field strengths and mass-to-flux ratios, finding that magnetic field strengths vary from 0.02 to 3.64 mG with a mean value of 1.0 \ub1 0.06 mG, and the mean critical mass-to-flux ratio is 0.47 \ub1 0.02. Additionally, the mean Alfv\ue9n Mach number is 0.35 \ub1 0.01. This suggests that, in Mon R2, the magnetic fields provide resistance against large-scale gravitational collapse, and the magnetic pressure exceeds the turbulent pressure. We also investigate the properties of each filament in Mon R2. Most of the filaments are aligned along the magnetic field direction and are magnetically subcritical

    The JCMT BISTRO Survey: Studying the Complex Magnetic Field of L43

    Get PDF
    We present observations of polarized dust emission at 850 μm from the L43 molecular cloud, which sits in the Ophiuchus cloud complex. The data were taken using SCUBA-2/POL-2 on the James Clerk Maxwell Telescope as a part of the BISTRO large program. L43 is a dense (NH 10 22 2 ~ –1023 cm−2) complex molecular cloud with a submillimeter-bright starless core and two protostellar sources. There appears to be an evolutionary gradient along the isolated filament that L43 is embedded within, with the most evolved source closest to the Sco OB2 association. One of the protostars drives a CO outflow that has created a cavity to the southeast. We see a magnetic field that appears to be aligned with the cavity walls of the outflow, suggesting interaction with the outflow. We also find a magnetic field strength of up to ∼160 ± 30 μG in the main starless core and up to ∼90 ± 40 μG in the more diffuse, extended region. These field strengths give magnetically super- and subcritical values, respectively, and both are found to be roughly trans-Alfvénic. We also present a new method of data reduction for these denser but fainter objects like starless cores
    corecore