Zinc layered hydroxide salts: intercalation and incorporation into low-density polyethylene

In this study, polymer composites using low-density polyethylene (LDPE) and layered hydroxide salts (LHS) were synthesized. The following compositions of LHS were obtained Zn5(OH)8(An-)2/n.yH2O, where A was varied in order to obtain hydrophilic (A = NO3 -) or hydrophobic (A = DDS- – dodecyl sulfate or DBS- – dodecyl benzene sulfonate). Synthesis was carried out by co-precipitation in alkaline medium and drying, being followed by characterization via Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction and scanning electron microscopy. A variable amount of filler was then incorporated into the LDPE via extrusion, which was then injection molded to obtain specimens for evaluating tensile properties (Young’s modulus, tensile strength, strain at break and toughness). For comparison, the sodium salts of the surfactants (NaDDS and NaDBS) were also used as fillers in LDPE. The X-ray diffraction results indicated that the hydrophobic LHS were exfoliated in the polymer matrix, whereas the hydrophilic LHS was only delaminated. In the LDPE composites, melting and crystallization temperatures were nearly constant, along with the crystallinity indexes. The mechanical properties were mainly varied when the organophilic LHS was used. Overall, fillers based on LHS, especially those containing hydrophobic anions, may be interesting alternatives in the production of reinforced thermoplastics

Phase changing nanocomposites for low temperature thermal energy storage and release

The aim of this paper is to develop new elastomeric phase change materials (PCM) for the thermal energy storage/release below room temperature. In particular, poly(cyclooctene) (PCO)/paraffin blends filled with various concentrations of carbon nanotubes (CNTs), were prepared by a melt compounding process. The microstructural, thermo-mechanical and electrical properties of the resulting materials were investigated. The microstructure of these materials was characterized by the presence of paraffin domains inside the PCO, and CNTs were located only inside the paraffin domains in forms of aggregated clusters. DSC tests evidenced the existence of two distinct crystallization peaks at –10 and at 6 °C, respectively associated to the paraffin and the PCO phases, indicating that both the polymeric constituents are thermally active below room temperature. Moreover, CNT addition did not substantially alter the melting/crystallization properties of the material. Noticeable improvements of the mechanical properties and of the electrical conductivity with respect to the neat PCO/paraffin blend could be obtained upon CNT addition, and also thermal conductivity/diffusivity values were considerably enhanced above the percolation threshold. Finite element modeling demonstrated the efficacy of the prepared nanocomposites for applications in the thermal range from –30 to 6 °C

Correlation Between Process Parameters and Mechanical Properties in Parts Printed by the Fused Deposition Modeling Process

Fused deposition modeling (FDM) represents one of the most common techniques for rapid prototyping and industrial additive manufacturing (AM). Optimizing the process parameters which significantly impact the mechanical properties is critical to achieving the ultimate final part quality sought by industry today. This work investigates the effect of different process parameters including nozzle temperature, printing speed, and print orientation on Young’s modulus, yield strength, and ultimate strength of the final part for two types of filament, namely, Poly Lactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS). Design of Experiments (DOE) is used to determine optimized values of the process parameters for each type of filaments; also, a comparison is made between the mechanical properties of the parts fabricated with the two materials. The results show that Y-axis orientation presents the best mechanical properties in PLA while X-axis orientation is the best orientation to print parts with ABS

Impact of Fibrous Microplastic Pollution on Commercial Seafood and Consumer Health: A Review

Simple SummaryMicrofiber pollution is a widespread threat to marine fauna. These particles may be released into water from textiles during the washing process, and due to their low dimensions, the majority of microfibers cannot be blocked from wastewater treatment plants, reaching seas and oceans. Consequently, they could be ingested by marine organisms, including edible species, potentially leading to human exposure. However, microfiber and associated chemical exposure in fish and humans are still understudied. Further research is needed to better understand the potential negative impacts of microfibers on aquatic habitats, marine biota, and humans.The omnipresence of microfibers in marine environments has raised concerns about their availability to aquatic biota, including commercial fish species. Due to their tiny size and wide distribution, microfibers may be ingested by wild-captured pelagic or benthic fish and farmed species. Humans are exposed via seafood consumption. Despite the fact that research on the impact of microfibers on marine biota is increasing, knowledge on their role in food security and safety is limited. The present review aims to examine the current knowledge about microfiber contamination in commercially relevant fish species, their impact on the marine food chain, and their probable threat to consumer health. The available information suggests that among the marine biota, edible species are also contaminated, but there is an urgent need to standardize data collection methods to assess the extent of microfiber occurrence in seafood. In this context, natural microfibers should also be investigated. A multidisciplinary approach to the microfiber issue that recognizes the interrelationship and connection of environmental health with that of animals and humans should be used, leading to the application of strategies to reduce microfiber pollution through the control of the sources and the development of remediation technologies

Thermal stability of high density polyethylene-fumed silica nanocomposites

High-density polyethylene-based nanocomposites were prepared through a melt compounding process by using surface functionalized fumed silica nanoparticles in various amounts, in order to investigate their capability to improve both mechanical properties and resistance to thermal degradation. The fine dispersion of silica aggregates led to noticeable improvements of both the elastic modulus and of the stress at yield proportionally to the filler content, while the tensile properties at break were not impaired even at elevated filler content. Thermogravimetric analysis showed that the selected nanoparticles were extremely effective both in increasing the decomposition temperature and in decreasing the mass loss rate, even at relatively low filler loadings. The formation of a char enriched layer, limiting the diffusion of the oxygen through the nanofilled samples, was responsible of noticeable improvements of the limiting oxygen index, especially at elevated silica loadings. In contrast with commonly reported literature results, cone calorimeter tests also revealed the efficacy of functionalized nanoparticles in delaying the time to ignition and in decreasing the heat release rate values. Therefore, the addition of functionalized fumed silica nanoparticles could represent an effective way to enhance the flammability properties of polyolefin matrices even at low filler concentrations