FOLDER3D: A graphical file management system supporting visualisation of file relationships

The desktop metaphor with its hierarchical structure of folders is the basis of almost all graphical file management systems. Despite this popularity, these systems suffer from several problems, including the restrictiveness of the single inheritance structure of hierarchical file management. Although various alternative systems have been proposed, none of these have gained popularity. We argue that the reason for this failure is that these systems have generally proposed complete alternatives to the hierarchical system, thus ignoring many of its positive aspects. In this paper we describe a 3D graphical file management which complements conventional 2D hierarchical folder structures by allowing visualisation of alternative file relationships

8x14Gb/s ring WDM modulator array with integrated tungsten heaters and Ge monitor photodetectors

An 8x14Gb/s wavelength-division multiplexed Si ring modulator array is presented with uniform channel performance. Tungsten heaters and Ge monitor photodetectors at the ring modulator drop ports are co-integrated to track and control the modulation quality

Heat budget studies of the north Arabian Sea during summer and winter seasons, 1992

In this study heat budget components and momentum flux for August and January 1992 over the north Arabian Sea are computed. The marine meteorological data measured on board during the cruises of PAK-US joint project (NASEER) are used for the computation. Significant differences were found in the heat budget components as well as in the momentum flux during different monsoon periods over the north Arabian Sea. The latent heat flux was always positive and attributed to the large vapour pressure gradient. The computed moisture and latent heat fluxes in January were higher than August The highest value of latent heat flux 309 W/m2 at station 8 was evaluated. These higher latent heat fluxes were due to the large vapour pressure gradient, air-sea temperature difference, the wind speed, and the prevailing wind direction (from north and northeast). Negative values of sensible heat fluxes in both seasons indicate that the heat transfer was from the atmosphere to the ocean. The negative values of net heat gain indicate that the sea surface field became an energy sink: or the sea surface supplied more energy to the atmosphere than it received from it. Large variation in the momentum flux mainly attributed to the variation in the wind speed. Aerial averages of heat and momentum fluxes were also computed

An ontology for defining and characterizing demonstration environments

Demonstration Environments (DEs) are essential tools for testing and demonstrating new technologies, products, and services, and reducing uncertainties and risks in the innovation process. However, the terminology used to describe these environments is inconsistent, leading to heterogeneity in defining and characterizing them. This makes it difficult to establish a universal understanding of DEs and to differentiate between the different types of DEs, including testbeds, pilot-plants, and living labs. Moreover, existing literature lacks a holistic view of DEs, with studies focusing on specific types of DEs and not offering an integrated perspective on their characteristics and applicability in different contexts. This study proposes an ontology for knowledge representation related to DEs to address this gap. Using an ontology learning approach analyzing 3621 peer-reviewed journal articles, we develop a standardized framework for defining and characterizing DEs, providing a holistic view of these environments. The resulting ontology allows innovation managers and practitioners to select appropriate DEs for achieving their innovation goals, based on the characteristics and capabilities of the specific type of DE. The contributions of this study are significant in advancing the understanding and application of DEs in innovation processes. The proposed ontology provides a standardized approach for defining and characterizing DEs, reducing inconsistencies in terminology and establishing a common understanding of these environments. This enables innovation managers and practitioners to select appropriate DEs for their specific innovation goals, facilitating more efficient and effective innovation processes. Overall, this study provides a valuable resource for researchers, practitioners, and policymakers interested in the effective use of DEs in innovation

An ontology for defining and characterizing demonstration environments

Demonstration Environments (DEs) are essential tools for testing and demonstrating new technologies, products, and services, and reducing uncertainties and risks in the innovation process. However, the terminology used to describe these environments is inconsistent, leading to heterogeneity in defining and characterizing them. This makes it difficult to establish a universal understanding of DEs and to differentiate between the different types of DEs, including testbeds, pilot-plants, and living labs. Moreover, existing literature lacks a holistic view of DEs, with studies focusing on specific types of DEs and not offering an integrated perspective on their characteristics and applicability in different contexts. This study proposes an ontology for knowledge representation related to DEs to address this gap. Using an ontology learning approach analyzing 3621 peer-reviewed journal articles, we develop a standardized framework for defining and characterizing DEs, providing a holistic view of these environments. The resulting ontology allows innovation managers and practitioners to select appropriate DEs for achieving their innovation goals, based on the characteristics and capabilities of the specific type of DE. The contributions of this study are significant in advancing the understanding and application of DEs in innovation processes. The proposed ontology provides a standardized approach for defining and characterizing DEs, reducing inconsistencies in terminology and establishing a common understanding of these environments. This enables innovation managers and practitioners to select appropriate DEs for their specific innovation goals, facilitating more efficient and effective innovation processes. Overall, this study provides a valuable resource for researchers, practitioners, and policymakers interested in the effective use of DEs in innovation

5α-Dihydro­vespertilin acetate

In the title compound, C24H36O4 [systematic name: (20S)-3β-acet­oxy-16α-hydr­oxy-22,23-bis­nor-5α,17β-cholano(22-16)lac­tone], the three six-membered rings adopt classical chair conformations, while the five-membered rings are in envelope conformations. The ester group attached to ring A is in an equatorial position. Rings A/B, B/C and C/D are trans-fused, whereas rings D/E are cis-fused. The structure is devoid of any classical hydrogen bonds. However, non-classical inter- and intra­molecular hydrogen-bonding inter­actions of the type C—H⋯O are present in the structure

MultiTex RCT - A multifaceted intervention package for protection against cotton dust exposure among textile workers - A cluster randomized controlled trial in Pakistan: Study protocol

Background: In the Pakistani textile industry the prevalence of workplace respiratory illnesses, including byssinosis, is high. The MultiTex RCT study aims to determine the effectiveness of a multifaceted intervention package in reducing dust levels in cotton mills, decreasing the frequency of respiratory symptoms among cotton textile workers, and improving their lung function.Methods/design: We will conduct a cluster-randomized controlled trial at 28 textile mills in Karachi. The intervention will comprise: training in occupational health for all workers and managers reinforced by regular refresher sessions; the formation of workplace committees to draw up, agree and promote a health and safety plan that includes wet mopping, safe disposal of cotton dust, and the use of simple face-masks, as well as further publicity about the risks from cotton dust; and provision of adequate supplies of face-masks to support the health and safety plan. Participating mills will be randomized to intervention and control arms following a baseline survey. The impact of the intervention will be determined through follow-up surveys conducted at 3, 12 and 18 months. Data collection in the surveys will include spirometry, questionnaire-based interviews and cotton-dust measurements.Discussion: If successful, the study may pave the way for simple, low-cost interventions that can help reduce cotton-dust levels in textile mills, and improve the respiratory health of textile workers in developing countries such as Pakistan

Evaluating the suitability of several AR devices and tools for industrial applications

In recent years, there has been an increasing interest in Industrial Augmented Reality (IAR) due to its prominent role in the ongoing revolution known as Industry 4.0. For companies and industries it is essential to evaluate carefully which of the developed AR-based technologies to adopt, and when, for tasks such as training, maintenance, assistance, and collaborative design. There is also a wide array of hardware and software alternatives on the market, characterized by a significant heterogeneity in terms of functionalities, performance and cost. With this work, our objective is to study and compare some widely available devices and Software Development Kits (SDKs) for AR by leveraging a set of evaluation criteria derived from the actual literature which have been deemed capable to qualify the above assets as suitable for industrial applications. Such criteria include the operative range, robustness, accuracy and stability. Both marker-based and marker-less solutions have been considered, in order to investigate a wide range of possible use cases

Rapid purification of serine proteinases from Bothrops alternatus and Bothrops moojeni venoms

AbstractEnvenomation by Bothrops species results, among other symptoms, in hemostatic disturbances. These changes can be ascribed to the presence of enzymes, primarily serine proteinases some of which are structurally similar to thrombin and specifically cleave fibrinogen releasing fibrinopeptides. A rapid, three-step, chromatographic procedure was developed to routinely purify serine proteinases from the venoms of Bothrops alternatus and Bothrops moojeni. The serine proteinase from B. alternatus displays an apparent molecular mass of ∼32 kDa whereas the two closely related serine proteinases from B. moojeni display apparent molecular masses of ∼32 kDa and ∼35 kDa in SDS–PAGE gels. The partial sequences indicated that these enzymes share high identity with serine proteinases from the venoms of other Bothrops species. These proteins coagulate plasma and possess fibrinogenolytic activity but lack fibrinolytic activity