Exploring the tensile response in small carbon fibre composite bundles

Small composite bundles, AS4 carbon fibre epoxy, with a restricted number of reinforcing fibres, ca. 20, showed a progressive failure when tested in tension. In-situ acoustic emission observations under tensile load reveal that numerous fibres fail before ultimate failure of the small composite bundle, suggesting that isolated and individual fibre failures occur without compromising the integrity of the neighboring fibres or the small composite bundle’s overall mechanical performance. The average strength of the carbon fibres in small composite bundles was 9.6% higher than in standard lab-scale composite specimens using the same fibre type

Vigorous star formation hidden by dust in a galaxy at z=1.4z=1.4

Near-infrared surveys have revealed a substantial population of enigmatic faint galaxies with extremely red optical-to-near-infrared colours and with a sky surface density comparable to that of faint quasars. There are two scenarios for these extreme colours: (i) these distant galaxies have formed virtually all their stars at very high redshifts and, due to the absence of recently formed stars, the colours are extremely red and (ii) these distant galaxies contain large amounts of dust, severely reddening the rest-frame UV--optical spectrum. HR10 ($z = 1.44$) is considered the archetype of the extremely red galaxies. Here we report the detection of the continuum emission from HR10 at 850$\mu$m and at 1250$\mu$m, demonstrating that HR10 is a very dusty galaxy undergoing a major episode of star formation. Our result provides a clear example of a high-redshift galaxy where the star formation rate inferred from the ultraviolet luminosity would be underestimated by a factor up to 1000, and shows that great caution should be used to infer the global star formation history of the Universe from optical observations only.Comment: 12 pages, 1 figure, Nature, in press (30 April 1998

A Microscopic View on the Mott transition in Chromium-doped V2O3

V2O3 is the prototype system for the Mott transition, one of the most fundamental phenomena of electronic correlation. Temperature, doping or pressure induce a metal to insulator transition (MIT) between a paramagnetic metal (PM) and a paramagnetic insulator (PI). This or related MITs have a high technological potential, among others for intelligent windows and field effect transistors. However the spatial scale on which such transitions develop is not known in spite of their importance for research and applications. Here we unveil for the first time the MIT in Cr-doped V2O3 with submicron lateral resolution: with decreasing temperature, microscopic domains become metallic and coexist with an insulating background. This explains why the associated PM phase is actually a poor metal. The phase separation can be associated with a thermodynamic instability near the transition. This instability is reduced by pressure which drives a genuine Mott transition to an eventually homogeneous metallic state.Comment: Paper plus supplementary materia

Durability of interior renderings in schools: optimization of envelope insulation for mitigation of mould growth risk

A high standard education is, nowadays, a clear objective for anymodern society. In Portugal, the retrofit of educational buildings has an enormousrelevance as demonstrated by the Program for Retrofit and Upgrade of HighSchools. Educational buildings specific characteristics such as high occupancyrates and high amount of time children spend in classrooms make them a specialcase compared to other buildings. Mould growth on envelope surfaces is frequentlyobserved in these buildings, reducing the expected durability of renderingsand coatings. The present work consisted of two main lines of research: one ofsimulation and other of optimization. The simulation part included modelling ofInterior Surfaces Temperature, Indoor Air Temperature and Relative Humidityvariation, before and after a hypothetical retrofit process. Optimization techniqueswere applied in the definition of insulation thickness to be numerically tested in theafter retrofit scenario. The objective was to minimise insulation thickness ineach building element of the envelope. The constraints were derived from thecontrol of surface temperature values that would result in mould growth risk

Comparison of the CDC Backpack aspirator and the Prokopack aspirator for sampling indoor- and outdoor-resting mosquitoes in southern Tanzania.

BACKGROUND\ud \ud Resting mosquitoes can easily be collected using an aspirating device. The most commonly used mechanical aspirator is the CDC Backpack aspirator. Recently, a simple, and low-cost aspirator called the Prokopack has been devised and proved to have comparable performance. The following study evaluates the Prokopack aspirator compared to the CDC backpack aspirator when sampling resting mosquitoes in rural Tanzania.\ud \ud METHODS\ud \ud Mosquitoes were sampled in- and outdoors of 48 typical rural African households using both aspirators. The aspirators were rotated between collectors and households in a randomized, Latin Square design. Outdoor collections were performed using artificial resting places (large barrel and car tyre), underneath the outdoor kitchen (kibanda) roof and from a drop-net. Data were analysed with generalized linear models.\ud \ud RESULTS\ud \ud The number of mosquitoes collected using the CDC Backpack and the Prokopack aspirator were not significantly different both in- and outdoors (indoors p = 0.735; large barrel p = 0.867; car tyre p = 0.418; kibanda p = 0.519). The Prokopack was superior for sampling of drop-nets due to its smaller size. The number mosquitoes collected per technician was more consistent when using the Prokopack aspirator. The Prokopack was more user-friendly: technicians preferred using the it over the CDC backpack aspirator as it weighs considerably less, retains its charge for longer and is easier to manoeuvre.\ud \ud CONCLUSIONS\ud \ud The Prokopack proved in the field to be more advantageous than the CDC Backpack aspirator. It can be self assembled using simple, low-cost and easily attainable materials. This device is a useful tool for researchers or vector-control surveillance programs operating in rural Africa, as it is far simpler and quicker than traditional means of sampling resting mosquitoes. Further longitudinal evaluations of the Prokopack aspirator versus the gold standard pyrethrum spray catch for indoor resting catches are recommended

A systematic review of randomised controlled trials on the effectiveness of exercise programs on lumbo pelvic pain among postnatal women

Background: A substantial number of women tend to be affected by Lumbo Pelvic Pain (LPP) following child birth. Physical exercise is indicated as a beneficial method to relieve LPP, but individual studies appear to suggest mixed findings about its effectiveness. This systematic review aimed to synthesise evidence from randomised controlled trials on the effectiveness of exercise on LPP among postnatal women to inform policy, practice and future research. Methods: A systematic review was conducted of all randomised controlled trials published between January 1990 and July 2014, identified through a comprehensive search of following databases: PubMed, PEDro, Embase, Cinahl, Medline, SPORTDiscus, Cochrane Pregnancy and Childbirth Group’s Trials Register, and electronic libraries of authors’institutions. Randomised controlled trials were eligible for inclusion if the intervention comprised of postnatal exercise for women with LPP onset during pregnancy or within 3 months after delivery and the outcome measures included changes in LPP. Selected articles were assessed using the PEDro Scale for methodological quality and findings were synthesised narratively as meta-analysis was found to be inappropriate due to heterogeneity among included studies. Results: Four randomised controlled trials were included, involving 251 postnatal women. Three trials were rated as of ‘good’ methodological quality. All trials, except one, were at low risk of bias. The trials included physical exercise programs with varying components, differing modes of delivery, follow up times and outcome measures. Intervention in one trial, involving physical therapy with specific stabilising exercises, proved to be effective in reducing LPP intensity. An improvement in gluteal pain on the right side was reported in another trial and a significant difference in pain frequency in another. Conclusion: Our review indicates that only few randomised controlled trials have evaluated the effectiveness of exercise on LPP among postnatal women. There is also a great amount of variability across existing trials in the components of exercise programs, modes of delivery, follow up times and outcome measures. While there is some evidence to indicate the effectiveness of exercise for relieving LPP, further good quality trials are needed to ascertain the most effective elements of postnatal exercise programs suited for LPP treatment

Directed self-organization of graphene nanoribbons on SiC

Realization of post-CMOS graphene electronics requires production of semiconducting graphene, which has been a labor-intensive process. We present tailoring of silicon carbide crystals via conventional photolithography and microelectronics processing to enable templated graphene growth on 4H-SiC{1-10n} (n = 8) crystal facets rather than the customary {0001} planes. This allows self-organized growth of graphene nanoribbons with dimensions defined by those of the facet. Preferential growth is confirmed by Raman spectroscopy and high-resolution transmission electron microscopy (HRTEM) measurements, and electrical characterization of prototypic graphene devices is presented. Fabrication of > 10,000 top-gated graphene transistors on a 0.24 cm2 SiC chip demonstrates scalability of this process and represents the highest density of graphene devices reported to date.Comment: 13 pages, 5 figure

Metabolic flexibility as a major predictor of spatial distribution in microbial communities

A better understand the ecology of microbes and their role in the global ecosystem could be achieved if traditional ecological theories can be applied to microbes. In ecology organisms are defined as specialists or generalists according to the breadth of their niche. Spatial distribution is often used as a proxy measure of niche breadth; generalists have broad niches and a wide spatial distribution and specialists a narrow niche and spatial distribution. Previous studies suggest that microbial distribution patterns are contrary to this idea; a microbial generalist genus (Desulfobulbus) has a limited spatial distribution while a specialist genus (Methanosaeta) has a cosmopolitan distribution. Therefore, we hypothesise that this counter-intuitive distribution within generalist and specialist microbial genera is a common microbial characteristic. Using molecular fingerprinting the distribution of four microbial genera, two generalists, Desulfobulbus and the methanogenic archaea Methanosarcina, and two specialists, Methanosaeta and the sulfate-reducing bacteria Desulfobacter were analysed in sediment samples from along a UK estuary. Detected genotypes of both generalist genera showed a distinct spatial distribution, significantly correlated with geographic distance between sites. Genotypes of both specialist genera showed no significant differential spatial distribution. These data support the hypothesis that the spatial distribution of specialist and generalist microbes does not match that seen with specialist and generalist large organisms. It may be that generalist microbes, while having a wider potential niche, are constrained, possibly by intrageneric competition, to exploit only a small part of that potential niche while specialists, with far fewer constraints to their niche, are more capable of filling their potential niche more effectively, perhaps by avoiding intrageneric competition. We suggest that these counter-intuitive distribution patterns may be a common feature of microbes in general and represent a distinct microbial principle in ecology, which is a real challenge if we are to develop a truly inclusive ecology

Mapping species distributions: A comparison of skilled naturalist and lay citizen science recording

To assess the ability of traditional biological recording schemes and lay citizen science approaches to gather data on species distributions and changes therein, we examined bumblebee records from the UK’s national repository (National Biodiversity Network) and from BeeWatch. The two recording approaches revealed similar relative abundances of bumblebee species but different geographical distributions. For the widespread common carder (Bombus pascuorum), traditional recording scheme data were patchy, both spatially and temporally, reflecting active record centre rather than species distribution. Lay citizen science records displayed more extensive geographic coverage, reflecting human population density, thus offering better opportunities to account for recording effort. For the rapidly spreading tree bumblebee (Bombus hypnorum), both recording approaches revealed similar distributions due to a dedicated mapping project which overcame the patchy nature of naturalist records. We recommend, where possible, complementing skilled naturalist recording with lay citizen science programmes to obtain a nation-wide capability, and stress the need for timely uploading of data to the national repository

Conservative management versus open reduction and internal fixation for mid-shaft clavicle fractures in adults - The Clavicle Trial: Study protocol for a multicentre randomized controlled trial

Background: Clavicle fractures account for around 4% of all fractures and up to 44% of fractures of the shoulder girdle. Fractures of the middle third (or mid-shaft) account for approximately 80% of all clavicle fractures. Management of this group of fractures is often challenging and the outcome can be unsatisfactory. In particular it is not clear whether surgery produces better outcomes than non-surgical management. Currently there is much variation in the use of surgery and a lack of good quality evidence to inform our decision.Methods/Design: We aim to undertake a multicentre randomised controlled trial evaluating the effectiveness and safety of conservative management versus open reduction and internal fixation for displaced mid-shaft clavicle fractures in adults. Surgical treatment will be performed using the Acumed clavicle fixation system. Conservative management will consist of immobilisation in a sling at the side in internal rotation for 6 weeks or until clinical or radiological union. We aim to recruit 300 patients. These patients will be followed-up for at least 9 months. The primary endpoint will be the rate of non-union at 3 months following treatment. Secondary endpoints will be limb function measured using the Constant-Murley Score and the Disabilities of the Arm, Shoulder and Hand (DASH) Score at 3 and 9 months post-operatively.Discussion: This article presents the protocol for a multicentre randomised controlled trial. It gives extensive details of, and the basis for, the chosen methods, and describes the key measures taken to avoid bias and to ensure validity.Trial Registration: United Kingdom Clinical Research Network ID: 8665. The date of registration of the trial is 07/09/2006. The date the first patient was recruited is 18/12/2007. © 2011 Longo et al; licensee BioMed Central Ltd