Dryland maize yields and water use efficiency in response to tillage and nutrient management practices in China

Rainfed crop production in northern China is constrained by low and variable rainfall. This study explored the effects of tillage and nutrient management practices on maize (Zea mays L.) yield and water use efficiency (WUE), at Shouyang Dryland Farming Experimental Station in northern China during 2003-2008. The experiment was set-up using a split-plot design with 3 tillage methods as main treatments: conventional, reduced (till with crop residue incoperated in fall but no-till in spring), and no-till. Sub-treatments were 3 NP fertilizer rates: 105-46, 179-78 and 210-92 kg N and P ha. -1 Maize grain yields were greatly influenced by the amount of growing season rainfall, and by soil water contents at sowing. Mean grain yields over the 6-year period in response to tillage treatments were 5604, 5347 and 5185 kg ha, under reduced, no-till and conventional tillage, respectively. Mean WUE was 13.7, 13.6 and 12.6 kg ha mm under reduced, no-till, and conventional tillage, respectively. Mean soil water contents at sowing and at harvest were significantly influenced by tillage treatments. At harvest time, the no-till treatment had ~8-12% more water in the soil than the conventional and reduced tillage treatments. Under conventional tillage, grain yields increased with NP fertilizer application rates. However, under reduced tillage, grain yields were highest with lowest NP fertilizer application rate. In conclusion, grain yields and WUE were highest under reduced tillage at modest NP fertilizer application rates of 105 kg N and 46 kg P per ha. No-till increased soil water storage by 8-12% and improved WUE compared to conventional tillage

In-Plane Magnetic Anisotropy In RF Sputtered Fe-N Thin Films

We have fabricated Fe(N) thin films with varied N2 partial pressure and studied the microstructure, morphology, magnetic properties and resistivity by using X-ray diffraction, atomic force microscopy, transmission electron microscopy, vibrating-sample magnetometer and angle-resolved M-H hysteresis Loop tracer and standard four-point probe method. In the presence of low N2 partial pressure, Fe(N) films showed a basic bcc a-Fe structure with a preferred (110) texture. A variation of in-plane magnetic anisotropy of the Fe(N) films was observed with the changing of N component. The evolution of in-plane anisotropy in the films was attributed to the directional order mechanism. Nitrogen atoms play an important role in refining the a-Fe grains and inducing uniaxial anisotropy.Comment: 11 pages, 6 figure

Crop residue, manure and fertilizer in dryland maize under reduced tillage in northern China: I grain yields and nutrient use efficiencies

The rapidly increasing population and associated quest for food and feed in China has led to increased soil cultivation and nitrogen (N) fertilizer use, and as a consequence to increased wind erosion and unbalanced crop nutrition. In the study presented here, we explored the long-term effects of various combinations of maize stover, cattle manure and nitrogen (N) and phosphorus (P) fertilizer applications on maize (Zea mays L.) yield and nutrient and water use efficiencies under reduced tillage practices. In a companion paper, we present the effects on nutrient balances and soil fertility characteristics. The ongoing factorial field trial was conducted at Shouyang Dryland Farming Experimental Station in northern China from 1993 onwards. The incomplete, determinant-optimal design comprised 12 treatments, including a control treatment, in duplicate. Grain yields and N, P, and potassium (K) uptakes and N, P and K use efficiencies were greatly influenced by the amount of rain during the growing season (GSR), and by soil water at sowing (SWS). There were highly significant interactions between GSR and added stover and manure, expressed in complex annual variations in grain yield and N, P and K use efficiencies. Annual mean grain yields ranged from 3,000 kg ha¿1 to 10,000 kg ha¿1 and treatment mean yields from 4,500 kg ha¿1 to 7,000 kg ha¿1. Balanced combination of stover (3,000¿6,000 kg), manure (1,500¿6,000 kg) and N fertilizer (105 kg) gave the highest yield. Stover and manure were important for supplying K, but the effects differed greatly between years. Overall mean N recovery efficiency (NRE) ranged from 28% to 54%, depending on N source. NRE in wet years ranged from 50% to 90%. In conclusion, balanced combinations of stover, manure and NP fertilizer gave the highest yield and NRE. Reduced tillage with adding stover and manure in autumn prior to ploughing is effective in minimizing labor requirement and wind erosion. The potentials of split applications of N fertilizer, targeted to the need of the growing crop (response farming), should be explored to further increase the N use efficiency

A self-consistent method to analyze the effects of the positive Q-value neutron transfers on fusion

AbstractConsidering the present limitation of the need for external parameters to describe the nucleus–nucleus potential and the couplings in the coupled-channels calculations, this work introduces an improved method without adjustable parameter to overcome the limitation and then sort out the positive Q-value neutron transfers (PQNT) effects based on the CCFULL calculations. The corresponding analysis for Ca+Ca, S,Ca+Sn, and S,Ca+Zr provides a reliable proof and a quantitative evaluation for the residual enhancement (RE) related to PQNT. In addition, the RE for S32,Ca40+Zr94 shows an unexpected larger enhancement than S32,Ca40+Zr96 despite the similar multi-neutron transfer Q-values. This method should rather strictly test the fusion models and be helpful for excavating the underlying physics

Studies of Prototype CsI(Tl) Crystal Scintillators for Low-Energy Neutrino Experiments

Crystal scintillators provide potential merits for the pursuit of low-energy low-background experiments. A CsI(Tl) scintillating crystal detector is being constructed to study low-energy neutrino physics at a nuclear reactor, while projects are underway to adopt this technique for dark matter searches. The choice of the geometrical parameters of the crystal modules, as well as the optimization of the read-out scheme, are the results of an R&D program. Crystals with 40 cm in length were developed. The detector requirements and the achieved performance of the prototypes are presented. Future prospects for this technique are discussed.Comment: 32 pages, 14 figure

Contribution of biomimetic collagen-ligand interaction to intrafibrillar mineralization

Contemporary models of intrafibrillar mineralization mechanisms are established using collagen fibrils as templates without considering the contribution from collagen-bound apatite nucleation inhibitors. However, collagen matrices destined for mineralization in vertebrates contain bound matrix proteins for intrafibrillar mineralization. Negatively charged, high\u2013molecular weight polycarboxylic acid is cross-linked to reconstituted collagen to create a model for examining the contribution of collagen-ligand interaction to intrafibrillar mineralization. Cryogenic electron microscopy and molecular dynamics simulation show that, after cross-linking to collagen, the bound polyelectrolyte caches prenucleation cluster singlets into chain-like aggregates along the fibrillar surface to increase the pool of mineralization precursors available for intrafibrillar mineralization. Higher-quality mineralized scaffolds with better biomechanical properties are achieved compared with mineralization of unmodified scaffolds in polyelectrolyte-stabilized mineralization solution. Collagen-ligand interaction provides insights on the genesis of heterogeneously mineralized tissues and the potential causes of ectopic calcification in nonmineralized body tissues

Spin- and charge-density oscillations in spin chains and quantum wires

We analyze the spin- and charge-density oscillations near impurities in spin chains and quantum wires. These so-called Friedel oscillations give detailed information about the impurity and also about the interactions in the system. The temperature dependence of these oscillations explicitly shows the renormalization of backscattering and conductivity, which we analyze for a number of different impurity models. We are also able to analyze screening effects in one dimension. The relation to the Kondo effect and experimental consequences are discussed.Comment: Final published version. 15 pages in revtex format including 22 epsf-embedded figures. The latest version in PDF format is available from http://fy.chalmers.se/~eggert/papers/density-osc.pd

Varying Contents of Sources Affect Tectonic-Setting Discrimination of Sediments: A Case Study from Permian Sandstones in the Eastern Tianshan, Northwestern China

This article reports new geochemical data from Permian sandstones, most probably deposited during a period of postcollisional extension, from the Yamansu, Shaquanzi, and Xingxingxia areas in the Eastern Tianshan, northwestern China, to determine and characterize their provenance and source nature. The medium- to coarse-grained sandstones are composed mainly of angular to subangular quartz and volcanic fragments, with minor plagioclase and/or microcline, suggesting proximal deposition. Although the samples show relatively large variations in SiO2 (59.7–70.8 wt%), Al2O3 (9.0–14.9 wt%), and Fe2O3T + MgO (2.3–5.2 wt%) contents, they yield low chemical index of alteration values (41–55) but high index of compositional variability values (1.06–1.78), suggestive of their derivation mainly from compositionally immature sources with weak chemical weathering. Their relatively low Zr concentrations (99–225 ppm) and GdN/YbN ratios (1.20–1.53) manifest insignificant zircon and monazite enrichments. Most of the samples are characterized by upper continental crust–like rare earth element (REE) patterns with δEu values of 0.63–0.99, reflecting dominant contributions from intermediate to felsic rocks. In particular, the Xingxingxia and Shaquanzi samples have relatively low SiO2/Al2O3 (4.51–5.82) and Th/U (2.67–3.77) ratios but high ∑REE (total REE) contents (71.8–141.1 ppm), indicative of a low degree of sedimentary sorting/recycling, whereas the Yamansu samples have higher SiO2/Al2O3 (6.30–6.57) and Th/U (3.93–5.16) ratios but low ∑REE contents (77.1–86.8 ppm), probably indicative of a higher degree of sedimentary recycling or more involvement of recycled materials. Tectonic-setting discrimination using geochemical data from the samples yielded inconsistent results, with the Xingxingxia and Shaquanzi samples dominantly plotted in or adjacent to the active continental margin or continental island arc field, while the Yamansu samples mostly plotted in or adjacent to the passive margin field. Combining our findings with those of previous detrital zircon studies, we suggest that the inconsistent tectonic discriminations of the Permian sandstones most likely resulted from their receiving different proportions of source rocks that have distinct geochemical compositions. This study provides ample evidence that the geochemical compositions of sedimentary rocks within a continuous sequence or in the same depositional tectonic setting can vary significantly as a result of changes in contents of different source materials and thus that the use of tectonic-setting discrimination diagrams requires great caution

Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta

Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector, the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and (7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure