Electrical testing of the full-scale model of the NSTX HHFW antenna array

The 30 MHz high harmonic fast wave (HHFW) antenna array for NSTX consists of 12 current straps, evenly spaced in the toroidal direction. Each pair of straps is connected as a half-wave resonant loop and will be driven by one transmitter, allowing rapid phase shift between transmitters. A decoupling network using shunt stub tuners has been designed to compensate for the mutual inductive coupling between adjacent current straps, effectively isolating the six transmitters from one another. One half of the array, consisting of six full-scale current strap modules, three shunt stub decouplers, and powered by three phase-adjustable rf amplifiers had been built for electrical testing at ORNL. Low power testing includes electrical characterization of the straps, operation and performance of the decoupler system, and mapping of the rf fields in three dimensions

Modelling vehicles acceleration during overtaking manoeuvres

[EN] Abstract: Overtaking manoeuvre is a key issue for two-lane rural roads. These roads should provide sufficient overtaking sight distance (OSD) at certain locations to allow faster vehicles to pass slower ones. However, overtaking requires occupying the opposing lane, which represents a serious safety concern. Severity of overtaking related crashes is very high, compared with other manoeuvres. The development of advanced driver assistance systems (ADAS) for overtaking is being a complex task. Only few systems have been developed, but are not still in use. This research incorporated accurate data of real manoeuvres to improve the knowledge of the phenomenon. The trajectory of the overtaking vehicles on the left lane was observed. An instrumented vehicle measured the overtaking time and distance, the abreast position, and the initial and final speed of 180 drivers that passed it during a field experiment. Six different kinematic models (such as uniform acceleration or linear variation of acceleration) were calibrated. Generally, drivers started to accelerate before changing to the opposing lane. These models may be applied to ADAS, to estimate OSD and to improve microsimulation models.Part of this research was included in the project 'Desarrollo de modelos de distancias de visibilidad de adelantamiento', with reference code TRA2010-21736 and subsidised by the Spanish Ministery of Economy and Competitivity. The authors also thank Prof Dr Sayed, from University of British Columbia, for his valuable review.Llorca Garcia, C.; Moreno, AT.; García García, A. (2016). Modelling vehicles acceleration during overtaking manoeuvres. IET Intelligent Transport Systems. 10(3):206-215. https://doi.org/10.1049/iet-its.2015.0035S206215103Gray, R., & Regan, D. M. (2005). Perceptual Processes Used by Drivers During Overtaking in a Driving Simulator. Human Factors: The Journal of the Human Factors and Ergonomics Society, 47(2), 394-417. doi:10.1518/0018720054679443Basilio, N., Morice, A. H. P., Marti, G., & Montagne, G. (2015). High- and Low-Order Overtaking-Ability Affordances. Human Factors: The Journal of the Human Factors and Ergonomics Society, 57(5), 879-894. doi:10.1177/0018720815583581Morice, A. H. P., Diaz, G. J., Fajen, B. R., Basilio, N., & Montagne, G. (2015). An Affordance-Based Approach to Visually Guided Overtaking. Ecological Psychology, 27(1), 1-25. doi:10.1080/10407413.2015.991641Farah, H., Bekhor, S., & Polus, A. (2009). Risk evaluation by modeling of passing behavior on two-lane rural highways. Accident Analysis & Prevention, 41(4), 887-894. doi:10.1016/j.aap.2009.05.006Hassan, Y., Easa, S. M., & El Halim, A. O. A. (1996). Passing sight distance on two-lane highways: Review and revision. Transportation Research Part A: Policy and Practice, 30(6), 453-467. doi:10.1016/0965-8564(95)00032-1Wang, Y., & Cartmell, M. P. (1998). New Model for Passing Sight Distance on Two-Lane Highways. Journal of Transportation Engineering, 124(6), 536-545. doi:10.1061/(asce)0733-947x(1998)124:6(536)Sparks, G. A., Neudorf, R. D., Robinson, J. B. L., & Good, D. (1993). Effect of Vehicle Length on Passing Operations. Journal of Transportation Engineering, 119(2), 272-283. doi:10.1061/(asce)0733-947x(1993)119:2(272)Hanley, P. F., & Forkenbrock, D. J. (2005). Safety of passing longer combination vehicles on two-lane highways. Transportation Research Part A: Policy and Practice, 39(1), 1-15. doi:10.1016/j.tra.2004.09.001Khoury, J. E., & Hobeika, A. G. (2012). Integrated Stochastic Approach for Risk and Service Estimation: Passing Sight Distance Application. Journal of Transportation Engineering, 138(5), 571-579. doi:10.1061/(asce)te.1943-5436.0000366Jenkins, J. M., & Rilett, L. R. (2004). Application of Distributed Traffic Simulation for Passing Behavior Study. Transportation Research Record: Journal of the Transportation Research Board, 1899(1), 11-18. doi:10.3141/1899-02Rakha, H., Ahn, K., & Trani, A. (2004). Development of VT-Micro model for estimating hot stabilized light duty vehicle and truck emissions. Transportation Research Part D: Transport and Environment, 9(1), 49-74. doi:10.1016/s1361-9209(03)00054-3Polus, A., Livneh, M., & Frischer, B. (2000). Evaluation of the Passing Process on Two-Lane Rural Highways. Transportation Research Record: Journal of the Transportation Research Board, 1701(1), 53-60. doi:10.3141/1701-07Harwood, D. W., Gilmore, D. K., & Richard, K. R. (2010). Criteria for Passing Sight Distance for Roadway Design and Marking. Transportation Research Record: Journal of the Transportation Research Board, 2195(1), 36-46. doi:10.3141/2195-05Hegeman, G., Tapani, A., & Hoogendoorn, S. (2009). Overtaking assistant assessment using traffic simulation. Transportation Research Part C: Emerging Technologies, 17(6), 617-630. doi:10.1016/j.trc.2009.04.010Milanés, V., Llorca, D. F., Villagrá, J., Pérez, J., Fernández, C., Parra, I., … Sotelo, M. A. (2012). Intelligent automatic overtaking system using vision for vehicle detection. Expert Systems with Applications, 39(3), 3362-3373. doi:10.1016/j.eswa.2011.09.024Isermann, R., Mannale, R., & Schmitt, K. (2012). Collision-avoidance systems PRORETA: Situation analysis and intervention control. Control Engineering Practice, 20(11), 1236-1246. doi:10.1016/j.conengprac.2012.06.003Petrov, P., & Nashashibi, F. (2014). Modeling and Nonlinear Adaptive Control for Autonomous Vehicle Overtaking. IEEE Transactions on Intelligent Transportation Systems, 15(4), 1643-1656. doi:10.1109/tits.2014.2303995Llorca, C., & García, A. (2011). Evaluation of Passing Process on Two-Lane Rural Highways in Spain with New Methodology Based on Video Data. Transportation Research Record: Journal of the Transportation Research Board, 2262(1), 42-51. doi:10.3141/2262-05Llorca, C., Moreno, A. T., García, A., & Pérez-Zuriaga, A. M. (2013). Daytime and Nighttime Passing Maneuvers on a Two-Lane Rural Road in Spain. Transportation Research Record: Journal of the Transportation Research Board, 2358(1), 3-11. doi:10.3141/2358-01Llorca, C., Moreno, A. T., Pérez-Zuriaga, A. M., & García, A. (2013). Influence of age, gender and delay on overtaking dynamics. IET Intelligent Transport Systems, 7(2), 174-181. doi:10.1049/iet-its.2012.0147Khoury, J. E., & Hobeika, A. (2007). Incorporating Uncertainty into the Estimation of the Passing Sight Distance Requirements. Computer-Aided Civil and Infrastructure Engineering, 22(5), 347-357. doi:10.1111/j.1467-8667.2007.00491.xRakha, H., Snare, M., & Dion, F. (2004). Vehicle Dynamics Model for Estimating Maximum Light-Duty Vehicle Acceleration Levels. Transportation Research Record: Journal of the Transportation Research Board, 1883(1), 40-49. doi:10.3141/1883-05Fitzpatrick, K., Chrysler, S. T., & Brewer, M. (2012). Deceleration Lengths for Exit Terminals. Journal of Transportation Engineering, 138(6), 768-775. doi:10.1061/(asce)te.1943-5436.000038

Cichlid biogeography: comment and review

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/72313/1/j.1467-2979.2004.00148.x.pd

Milagro limits and HAWC sensitivity for the rate-density of evaporating Primordial Black Holes

postprin

On the sensitivity of the HAWC observatory to gamma-ray bursts

We present the sensitivity of HAWC to Gamma Ray Bursts (GRBs). HAWC is a very high-energy gamma-ray observatory currently under construction in Mexico at an altitude of 4100 m. It will observe atmospheric air showers via the water Cherenkov method. HAWC will consist of 300 large water tanks instrumented with 4 photomultipliers each. HAWC has two data acquisition (DAQ) systems. The main DAQ system reads out coincident signals in the tanks and reconstructs the direction and energy of individual atmospheric showers. The scaler DAQ counts the hits in each photomultiplier tube (PMT) in the detector and searches for a statistical excess over the noise of all PMTs. We show that HAWC has a realistic opportunity to observe the high-energy power law components of GRBs that extend at least up to 30 GeV, as it has been observed by Fermi LAT. The two DAQ systems have an energy threshold that is low enough to observe events similar to GRB 090510 and GRB 090902b with the characteristics observed by Fermi LAT. HAWC will provide information about the high-energy spectra of GRBs which in turn could help to understanding about e-pair attenuation in GRB jets, extragalactic background light absorption, as well as establishing the highest energy to which GRBs accelerate particles

Selective semiconductor filling of microstructured optical fibers

A novel selective filling technique has been developed for the patterning of semiconductor materials in microstructured optical fibers (MOFs) based on waveguide curing of epoxy filled capillary holes. The technique is compatible with the high pressures required for the semiconductor deposition and allows for quick and convenient selective filling, or coating, of complex designs in a range of MOF hole sizes and spacings. A variety of semiconductor filled MOFs have been demonstrated including the patterning of different materials within selected holes. The ability to selectively fill MOFs with multiple semiconductor materials is a step towards developing arrays of both passive and active all-fiber optoelectronic devices