Vertical distribution of clouds over Hampton, Virginia observed by lidar under the ECLIPS and FIRE ETO programs

Intensive cloud lidar observations have been made by NASA Langley Research Center during the two observation phases of the ECLIPS project. Less intensive but longer term observations have been conducted as part of the FIRE extended time observation (ETO) program since 1987. We present a preliminary analysis of the vertical distribution of clouds based on these observations. A mean cirrus thickness of just under 1 km has been observed with a mean altitude of about 80 percent of the tropopause height. Based on the lidar data, cirrus coverage was estimated to be just under 20 percent, representing roughly 50 percent of all clouds studied. Cirrus was observed to have less seasonal variation than lower clouds. Mid-level clouds are found to occur primarily in association with frontal activity

Aerosol and cloud sensing with the Lidar In-space Technology Experiment (LITE)

The Lidar In-space Technology Experiment (LITE) is a multi-wavelength backscatter lidar developed by NASA Langley Research Center to fly on the Space Shuttle. The LITE instrument is built around a three-wavelength ND:YAG laser and a 1-meter diameter telescope. The laser operates at 10 Hz and produces about 500 mJ per pulse at 1064 nm and 532 nm, and 150 mJ per pulse at 355 nm. The objective of the LITE program is to develop the engineering processes required for space lidar and to demonstrate applications of space-based lidar to remote sensing of the atmosphere. The LITE instrument was designed to study a wide range of cloud and aerosol phenomena. To this end, a comprehensive program of scientific investigations has been planned for the upcoming mission. Simulations of on-orbit performance show the instrument has sufficient sensitivity to detect even thin cirrus on a single-shot basis. Signal averaging provides the capability of measuring the height and structure of the planetary boundary layer, aerosols in the free troposphere, the stratospheric aerosol layer, and density profiles to an altitude of 40 km. The instrument has successfully completed a ground-test phase and is scheduled to fly on the Space Shuttle Discovery for a 9-day mission in September 1994

Extinction coefficients retrieved in deep tropical ice clouds from lidar observations using a CALIPSO-like algorithm compared to in-situ measurements from the Cloud Integrated Nephelometer during CRYSTAL-FACE

International audienceThis paper presents a comparison of lidar ratios and volume extinction coefficients in tropical ice clouds, retrieved using observations from two instruments: the 532-nm Cloud Physics Lidar (CPL), and the in-situ Cloud Integrating Nephelometer (CIN) probe. Both instruments were mounted on airborne platforms during the CRYSTAL-FACE campaign and took measurements up to 17 km. Coincident observations from two cases of ice clouds located on top of deep convective systems are compared. First, lidar ratios are retrieved from CPL observations of attenuated backscatter, using a retrieval algorithm for opaque cloud similar to one used in the soon-to-be launched CALIPSO mission, and compared to results from the regular CPL algorithm. These lidar ratios are used to retrieve extinction coefficient profiles, which are compared to actual observations from the CIN in-situ probe, putting the emphasis on their vertical variability. When observations coincide, retrievals from both instruments are very similar. Differences are generally variations around the average profiles, and general trends on larger spatial scales are usually well reproduced. The two instruments agree well, with an average difference of less than 11% on optical depth retrievals. Results suggest the CALIPSO Deep Convection algorithm can be trusted to deliver realistic estimates of the lidar ratio, leading to good retrievals of extinction coefficients

Extinction coefficients retrieved in deep tropical ice clouds from lidar observations using a CALIPSO-like algorithm compared to in-situ measurements from the cloud integrating nephelometer during CRYSTAL-FACE

The purpose of this paper is to examine the impact that digital technologies have on sports. Sports organisations are pursuing new technologies in order to boost the quality of their entities, not just on the playing field, but also, they are improving their business performance. I will investigate the opportunities that data analysis and digital technologies offer in sports. The main aim is to show the relationship between the use of technology and data, and business and sporting success. It is not enough to just have said technologies and big data if there is not adequate knowledge to professionally analyze data collected and if the users do not have the ability to use it in their favour. Therefore, the technology and data application has to go through a qualification process to ensure that the applied data co-exist with a context of competent knowledge sharing, individual and organizational learning in order to positively affect sporting and business performance. This paper will help readers understand how clubs and individuals use digital technology and data to their own advantage and with plenty of examples and figures provided, readers will be introduced to key trends in digital technologies in sports

Adjoint inversion modeling of Asian dust emission using lidar observations

International audienceA four-dimensional variational (4D-Var) data assimilation system for a regional dust model (RAMS/CFORS-4DVAR; RC4) is applied to an adjoint inversion of a heavy dust event over eastern Asia during 20 March?4 April 2007. The vertical profiles of the dust extinction coefficients derived from NIES Lidar network are directly assimilated, with validation using observation data. Two experiments assess impacts of observation site selection: Experiment A uses five Japanese observation sites located downwind of dust source regions; Experiment B uses these and two other sites near source regions. Assimilation improves the modeled dust extinction coefficients. Experiment A and Experiment B assimilation results are mutually consistent, indicating that observations of Experiment A distributed over Japan can provide comprehensive information related to dust emission inversion. Time series data of dust AOT calculated using modeled and Lidar dust extinction coefficients improve the model results. At Seoul, Matsue, and Toyama, assimilation reduces the root mean square differences of dust AOT by 35?40%. However, at Beijing and Tsukuba, the RMS differences degrade because of fewer observations during the heavy dust event. Vertical profiles of the dust layer observed by CALIPSO are compared with assimilation results. The dense dust layer was trapped at potential temperatures (?) of 280?300 K and was higher toward the north; the model reproduces those characteristics well. Latitudinal distributions of modeled dust AOT along the CALIPSO orbit paths agree well with those of CALIPSO dust AOT, OMI AI, and MODIS coarse-mode AOT, capturing the latitude at which AOTs and AI have high values. Assimilation results show increased dust emissions over the Gobi Desert and Mongolia; especially for 29?30 March, emission flux is about 10 times greater. Strong dust uplift fluxes over the Gobi Desert and Mongolia cause the heavy dust event. Total optimized dust emissions are 57.9 Tg (Experiment A; 57.8% larger than before assimilation) and 56.3 Tg (Experiment B; 53.4% larger)

Numerical modeling of Asian dust emission and transport with adjoint inversion using LIDAR network observations

International audienceA four-dimensional variational (4D-Var) data assimilation system for a regional dust model (RAMS/CFORS-4DVAR; RC4) is applied to a heavy dust event which occurred between 20 March and 4 April 2007 over eastern Asia. The vertical profiles of the dust extinction coefficients derived from NIES LIDAR observation network are directly assimilated. We conduct two experiments to evaluate impacts of selections of observation sites: Experiment A uses five Japanese observation sites located only downwind of dust source regions; the other Experiment B uses these sites together with two other sites near source regions (China and Korea). Validations using various observation data (e.g., PM10 concentration, MODIS AOT, OMI Aerosol Index, and the dust extinction coefficient derived by space-based LIDAR NASA/CALIPSO) are demonstrated. The modeled dust extinction coefficients are improved considerably through the assimilation. Assimilation results of Experiment A are consistent with those of Experiment B, indicating that observations of Experiment A can capture the dust event correctly and include sufficient information for dust emission inversion. Time series of dust AOT calculated by modeled and LIDAR dust extinction coefficients show good agreement. At Seoul, Matsue, and Toyama, assimilation reduces the root mean square errors of dust AOT by 31?32%. Vertical profiles of the dust layer observed by CALIPSO are also compared with assimilation results. The dense dust layer was trapped between ?=280?300 K and elevated higher toward the north; the model reproduces those characteristics well. The modeled dust AOT along the orbit paths agrees well with the CALIPSO dust AOT, OMI AI, and the coarse mode AOT retrieved from MODIS; especially the modeled dust AOT and the MODIS coarse mode AOT are consistent quantitatively. Assimilation results increase dust emissions over the Gobi Desert and Mongolia considerably; especially between 29 and 30 March, emission flux is increased by about 2?3 times. The heavy dust event is caused by the heavy dust uplift flux over the Gobi Desert and Mongolia during those days. We obtain the total optimized dust emissions of 57.9 Tg (Experiment A; 57.8% larger than before assimilation) and 56.3 Tg (Experiment B; 53.4% larger)

Calibration Technique for Polarization-Sensitive Lidars

Polarization-sensitive lidars have proven to be highly effective in discriminating between spherical and non-spherical particles in the atmosphere. These lidars use a linearly polarized laser and are equipped with a receiver that can separately measure the components of the return signal polarized parallel and perpendicular to the outgoing beam. In this work we describe a technique for calibrating polarization-sensitive lidars that was originally developed at NASA s Langley Research Center (LaRC) and has been used continually over the past fifteen years. The procedure uses a rotatable half-wave plate inserted into the optical path of the lidar receiver to introduce controlled amounts of polarization cross-talk into a sequence of atmospheric backscatter measurements. Solving the resulting system of nonlinear equations generates the system calibration constants (gain ratio, G, and offset angle, theta) required for deriving calibrated measurements of depolarization ratio from the lidar signals. In addition, this procedure also determines the mean depolarization ratio within the region of the atmosphere that is analyzed. Simulations and error propagation studies show the method to be both reliable and well behaved. Operational details of the technique are illustrated using measurements obtained as part of Langley Research Center s participation in the First ISCCP Regional Experiment (FIRE)

Vertical Profiles of Aerosol Optical Properties Over Central Illinois and Comparison with Surface and Satellite Measurements

Between June 2006 and September 2009, an instrumented light aircraft measured over 400 vertical profiles of aerosol and trace gas properties over eastern and central Illinois. The primary objectives of this program were to (1) measure the in situ aerosol properties and determine their vertical and temporal variability and (2) relate these aircraft measurements to concurrent surface and satellite measurements. Underflights of the CALIPSO satellite show reasonable agreement in a majority of retrieved profiles between aircraft-measured extinction at 532 nm (adjusted to ambient relative humidity) and CALIPSO-retrieved extinction, and suggest that routine aircraft profiling programs can be used to better understand and validate satellite retrieval algorithms. CALIPSO tended to overestimate the aerosol extinction at this location in some boundary layer flight segments when scattered or broken clouds were present, which could be related to problems with CALIPSO cloud screening methods. The in situ aircraft-collected aerosol data suggest extinction thresholds for the likelihood of aerosol layers being detected by the CALIOP lidar. These statistical data offer guidance as to the likelihood of CALIPSO's ability to retrieve aerosol extinction at various locations around the globe

Asian dust outflow in the PBL and free atmosphere retrieved by NASA CALIPSO and an assimilated dust transport model

International audienceThree-dimensional structures of Asian dust transport in the planetary boundary layer (PBL) and free atmosphere occurring successively during the end of May 2007 were clarified using results of space-borne backscatter lidar, Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), and results simulated using a data-assimilated version of a dust transport model (RC4) based on a ground-based NIES lidar network. Assimilated results mitigated overestimation of dust concentration by reducing 17.4% of dust emissions and improved the root mean square difference (RMSD) of dust AOT between the model and NIES lidar by 31.2?66.9%. The dust layer depths, vertical and horizontal structure simulated by RC4 agreed with CALIOP from the dust source region to a long-range downwind region for which 3-D distribution of dust clouds had not been clarified previously. Based on CALIOP and RC4, two significant transport mechanisms of Asian dust in the PBL and free atmosphere were clarified: a low level dust outbreak within the dry slot region of a well developed low-pressure system, and formation of an elevated dust layer within the warm sector of a low-pressure system. Finally, the aging of pure dust particles was investigated using the particle depolarization ratio (PDR) at 532 nm and the color ratio (CR) at 1064 nm and 532 nm for the low-altitude dust transport case. Aerosols with high PDR were observed uniformly over the dust source region. As the dust cloud was transported to the eastern downwind regions, aerosols with low PDR and high CR were found in the layer of less than 1 km height, suggesting changes from the external to internal mixing state of spherical aerosols and dust in the surface layer

The 48-inch lidar aerosol measurements taken at the Langley Research Center

This report presents lidar data taken between July 1991 and December 1992 using a ground-based 48-inch lidar instrument at the Langley Research Center in Hampton, Virginia. Seventy lidar profiles (approximately one per week) were obtained during this period, which began less than 1 month after the eruption of the Mount Pinatubo volcano in the Philippines. Plots of backscattering ratio as a function of altitude are presented for each data set along with tables containing numerical values of the backscattering ratio and backscattering coefficient versus altitude. The enhanced aerosol backscattering seen in the profiles highlights the influence of the Mount Pinatubo eruption on the stratospheric aerosol loading over Hampton. The long-term record of the profiles gives a picture of the evolution of the aerosol cloud, which reached maximum loading approximately 8 months after the eruption and then started to decrease gradually. NASA RP-1209 discusses 48-inch lidar aerosol measurements taken at the Langley Research Center from May 1974 to December 1987