Two-stage fan. 3: Data and performance with rotor tip casing treatment, uniform and distorted inlet flows

A two stage fan with a 1st-stage rotor design tip speed of 1450 ft/sec, a design pressure ratio of 2.8, and corrected flow of 184.2 lbm/sec was tested with axial skewed slots in the casings over the tips of both rotors. The variable stagger stators were set in the nominal positions. Casing treatment improved stall margin by nine percentage points at 70 percent speed but decreased stall margin, efficiency, and flow by small amounts at design speed. Treatment improved first stage performance at low speed only and decreased second stage performance at all operating conditions. Casing treatment did not affect the stall line with tip radially distorted flow but improved stall margin with circumferentially distorted flow. Casing treatment increased the attenuation for both types of inlet flow distortion

Photonic Crystal Nanobeam Cavity Strongly Coupled to the Feeding Waveguide

A deterministic design of an ultrahigh Q, wavelength scale mode volume photonic crystal nanobeam cavity is proposed and experimentally demonstrated. Using this approach, cavities with Q>10^6 and on-resonance transmission T>90% are designed. The devices fabricated in Si and capped with low-index polymer, have Q=80,000 and T=73%. This is, to the best of our knowledge, the highest transmission measured in deterministically designed, wavelength scale high Q cavities

Antireflective nanotextures for monolithic perovskite silicon tandem solar cells

Recently, we studied the effect of hexagonal sinusoidal textures on the reflective properties of perovskite silicon tandem solar cells using the finite element method FEM . We saw that such nanotextures, applied to the perovskite top cell, can strongly increase the current density utilization from 91 for the optimized planar reference to 98 for the best nanotextured device period 500 nm and peak to valley height 500 nm , where 100 refers to the Tiedje Yablonovitch limit. [D. Chen et al., J. Photonics Energy 8, 022601, 2018 , doi 10.1117 1.JPE.8.022601] In this manuscript we elaborate on some numerical details of that work we validate an assumption based on the Tiedje Yablonovitch limit, we present a convergence study for simulations with the finite element method, and we compare different configurations for sinusoidal nanotexture

Two-stage fan. 4: Performance data for stator setting angle optimization

Stator setting angle optimization tests were conducted on a two-stage fan to improve efficiency at overspeed, stall margin at design speed, and both efficiency and stall margin at partspeed. The fan has a design pressure ratio of 2.8, a flow rate of 184.2 lb/sec (83.55 kg/sec) and a 1st-stage rotor tip speed of 1450 ft/sec (441.96 in/sec). Performance was obtained at 70,100, and 105 percent of design speed with different combinations of 1st-stage and 2nd-stage stator settings. One combination of settings, other than design, was common to all three speeds. At design speed, a 2.0 percentage point increase in stall margin was obtained at the expense of a 1.3 percentage point efficiency decrease. At 105 percent speed, efficiency was improved by 1.8 percentage points but stall margin decreased 4.7 percentage points. At 70 percent speed, no change in stall margin or operating line efficiency was obtained with stator resets although considerable speed-flow requlation occurred

Prevalence of a postoperative troponin leak in patients with cardiac risk factors undergoing knee and hip arthroplasty in a South African population

Background. Patients undergoing arthroplasty may have comorbidities that put them at risk of myocardial injury after non-cardiac surgery (MINS). MINS, a new clinical concept that has a different pathophysiology from conventional myocardial infarction, is related to a supply-demand mismatch ischaemia in the perioperative setting. MINS is often a silent event, and the diagnosis relies on cardiac biomarker testing such as troponin T. The incidence is estimated at 40%, with a fourfold increase in morbidity and mortality risk 1 year post surgery.Objectives. To determine the prevalence of postoperative troponin leak in a single-centre arthroplasty unit in patients with various cardiac risk factors undergoing hip or knee arthroplasty and investigate the differences in troponin T levels between comorbidities and different types of arthroplasty, i.e. total hip replacement (THR), total knee replacement (TKR) and neck of femur (NoF) fracture hip replacement.Methods. A prospective, cross-sectional study of patients with one or more cardiac risk factors undergoing replacement surgery was conducted from October 2017 to April 2018. Troponin levels of all included patients were recorded on days 1 and 3 post surgery using a high-sensitivity cardiac troponin T assay (Roche hs-cTnT). A level of >15 ng/L is considered abnormal and termed a positive troponin leak, while >100 ng/L is considered suspected acute coronary syndrome (ACS).Results. One hundred and sixty patients (n=66 THR, n=55 NoF hip replacement, n=39 TKR) were included. Sixty-eight patients (42%) had a positive troponin leak, and in 6 of these cases ACS was suspected. The highest prevalence of troponin leak was recorded in patients undergoing NoF hip replacement (62%), followed by TKR (46%) and then THR (24%). Sixty-two patients (38%) had positive troponin levels on day 1 and 53 patients (33%) had positive levels on day 3. Important patient cardiac risk factors were identified in the presence of a positive troponin leak, with ischaemic heart disease, hypertension, diabetes, renal disease, age >65 years and atrial fibrillation being statistically most likely.Conclusions. Postoperative troponin surveillance is an inexpensive and reliable way to identify patients at risk of MINS and subsequently enhance early detection, medical optimisation and referral strategies. Simple interventions may improve outcomes and contribute to lower ACS rates and the timeous prevention of other complications. The prevalence of MINS in orthopaedic-specific patients in South Africa (SA) and other resource-constrained developing countries is unknown. Our finding of 42% positive troponin leaks raises awareness of this issue, and we recommend routine postoperative troponin surveillance for all arthroplasty units in SA.

Purification, growth, and characterization of Zn(x)Cd(1-x)Se crystals

The purification of starting materials which were used in the growth of Zn(x)Cd(1-x)Se (x = 0.2) single crystals using the traveling solution method (TSM) is reported. Up to 13 cm long single crystals and as grown resistivities of 6 x 10(exp 12) ohm/cm could be achieved. Infrared and Raman spectra of Zn(0.2)Cd(0.8)Se are also presented and discussed

Combining Contrast Invariant L1 Data Fidelities with Nonlinear Spectral Image Decomposition

This paper focuses on multi-scale approaches for variational methods and corresponding gradient flows. Recently, for convex regularization functionals such as total variation, new theory and algorithms for nonlinear eigenvalue problems via nonlinear spectral decompositions have been developed. Those methods open new directions for advanced image filtering. However, for an effective use in image segmentation and shape decomposition, a clear interpretation of the spectral response regarding size and intensity scales is needed but lacking in current approaches. In this context, $L^1$ data fidelities are particularly helpful due to their interesting multi-scale properties such as contrast invariance. Hence, the novelty of this work is the combination of $L^1$-based multi-scale methods with nonlinear spectral decompositions. We compare $L^1$ with $L^2$ scale-space methods in view of spectral image representation and decomposition. We show that the contrast invariant multi-scale behavior of $L^1-TV$ promotes sparsity in the spectral response providing more informative decompositions. We provide a numerical method and analyze synthetic and biomedical images at which decomposition leads to improved segmentation.Comment: 13 pages, 7 figures, conference SSVM 201