662 research outputs found
Detecting and quantifying methane emissions from oil and gas production: algorithm development with ground-truth calibration based on Sentinel-2 satellite imagery
Sentinel-2 satellite imagery has been shown by studies to be
capable of detecting and quantifying methane emissions from oil and gas
production. However, current methods lack performance calibration with
ground-truth testing. This study developed a multi-band–multi-pass–multi-comparison-date methane retrieval algorithm that enhances Sentinel-2 sensitivity to methane plumes. The method was calibrated
using data from a large-scale controlled-release test in Ehrenberg, Arizona,
in fall 2021, with three algorithm parameters tuned based on the true
emission rates. Tuned parameters are the pixel-level concentration upper-bound threshold during extreme value removal, the number of comparison
dates, and the pixel-level methane concentration percentage threshold when
determining the spatial extent of a plume. We found that a low value of the
upper-bound threshold during extreme value removal can result in false
negatives. A high number of comparison dates helps enhance the algorithm
sensitivity to the plumes in the target date, but values in excess of
12 d are neither necessary nor computationally efficient. A high percentage
threshold when determining the spatial extent of a plume helps enhance the
quantification accuracy, but it may harm the yes/no detection accuracy. We
found that there is a trade-off between quantification accuracy and
detection accuracy. In a scenario with the highest quantification accuracy,
we achieved the lowest quantification error and had zero false-positive
detections; however, the algorithm missed three true plumes, which reduced the
yes/no detection accuracy. In contrast, all of the true plumes were
detected in the highest detection accuracy scenario, but the emission rate
quantification had higher errors. We illustrated a two-step method that
updates the emission rate estimates in an interim step, which improves
quantification accuracy while keeping high yes/no detection accuracy. We
also validated the algorithm's ability to detect true positives and true
negatives in two application studies.</p
Quantification of Linear and Nonlinear Cardiorespiratory Interactions under Autonomic Nervous System Blockade
This paper proposes a methodology to extract both linear and nonlinear respiratory influences from the heart rate variability (HRV), by decomposing the HRV into a respiratory and a residual component. This methodology is based on least-squares support vector machines (LS-SVM) formulated for nonlinear function estimation. From this decomposition, a better estimation of the respiratory sinus arrhythmia (RSA) and the sympathovagal balance (SB) can be achieved. These estimates are first analyzed during autonomic blockade and an orthostatic maneuver, and then compared against the classical HRV and a model that considers only linear interactions. Results are evaluated using surrogate data analysis and they indicate that the classical HRV and the linear model underestimate the cardiorespiratory interactions. Moreover, the linear and nonlinear interactions appear to be mediated by different control mechanisms. These findings will allow to better assess the ANS and to improve the understanding of the interactions within the cardiorespiratory system
Quantifying methane point sources from fine-scale satellite observations of atmospheric methane plumes
Anthropogenic methane emissions originate from a large
number of relatively small point sources. The planned GHGSat satellite fleet
aims to quantify emissions from individual point sources by measuring methane
column plumes over selected ∼ 10×10 km2 domains with
≤ 50×50 m2 pixel resolution and 1 %–5 %
measurement precision. Here we develop algorithms for retrieving point source
rates from such measurements. We simulate a large ensemble of instantaneous
methane column plumes at 50×50 m2 pixel resolution for a range
of atmospheric conditions using the Weather Research and Forecasting model
(WRF) in large eddy simulation (LES) mode and adding instrument noise. We
show that standard methods to infer source rates by Gaussian plume inversion
or source pixel mass balance are prone to large errors because the turbulence
cannot be properly parameterized on the small scale of instantaneous methane
plumes. The integrated mass enhancement (IME) method, which relates total
plume mass to source rate, and the cross-sectional flux method, which infers
source rate from fluxes across plume transects, are better adapted to the
problem. We show that the IME method with local measurements of
the 10 m wind speed can infer source rates with an error of
0.07–0.17 t h−1 + 5 %–12 % depending on instrument precision
(1 %–5 %). The cross-sectional flux method has slightly larger
errors (0.07–0.26 t h−1 + 8 %–12 %) but a simpler physical
basis. For comparison, point sources larger than 0.3 t h−1 contribute
more than 75 % of methane emissions reported to the US Greenhouse Gas
Reporting Program. Additional error applies if local wind speed measurements
are not available and may dominate the overall error at low wind speeds. Low
winds are beneficial for source detection but detrimental for source
quantification.</p
Demersal fish assemblages on seamounts and other rugged features in the northeastern Caribbean
© The Author(s), 2017. This is the author's version of the work and is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Deep Sea Research Part I: Oceanographic Research Papers 123 (2017): 90–104, doi:10.1016/j.dsr.2017.03.009.Recent investigations of demersal fish communities in deepwater (>50 m) habitats have considerably increased our knowledge of the factors that influence the assemblage structure of fishes across mesophotic to deep-sea depths. While different habitat types influence deepwater fish distribution, whether different types of rugged seafloor features provide functionally equivalent habitat for fishes is poorly understood. In the northeastern Caribbean, different types of rugged features (e.g., seamounts, banks, canyons) punctuate insular margins, and thus create a remarkable setting in which to compare demersal fish communities across various features. Concurrently, several water masses are vertically layered in the water column, creating strong stratification layers corresponding to specific abiotic conditions. In this study, we examined differences among fish assemblages across different features (e.g., seamount, canyon, bank/ridge) and water masses at depths ranging from 98 to 4060 m in the northeastern Caribbean. We conducted 26 remotely operated vehicle dives across 18 sites, identifying 156 species of which 42% of had not been previously recorded from particular depths or localities in the region. While rarefaction curves indicated fewer species at seamounts than at other features in the NE Caribbean, assemblage structure was similar among the different types of features. Thus, similar to seamount studies in other regions, seamounts in the Anegada Passage do not harbor distinct communities from other types of rugged features. Species assemblages, however, differed among depths, with zonation generally corresponding to water mass boundaries in the region. High species turnover occurred at depths <1200 m, and may be driven by changes in water mass characteristics including temperature (4.8–24.4 °C) and dissolved oxygen (2.2–9.5 mg per l). Our study suggests the importance of water masses in influencing community structure of benthic fauna, while considerably adding to the knowledge of mesophotic and deep-sea fish biogeography.Funding was provided by NOAA-OER for the 2014 E/V Nautilus cruise and by the USGS Environments and Hazards Program and Ocean Exploration Trust for the 2013 E/V Nautilus 807 cruise.2019-03-1
On the 'centre of gravity' method for measuring the composition of magnetite/maghemite mixtures, or the stoichiometry of magnetite-maghemite solid solutions, via Fe-57 Mossbauer spectroscopy
We evaluate the application of 57Fe Mössbauer spectroscopy to the determination of the
composition of magnetite (Fe3O4)/maghemite (γ-Fe2O3) mixtures and the stoichiometry
of magnetite-maghemite solid solutions. In particular, we consider a recently proposed
model-independent method which does not rely on a priori assumptions regarding the
nature of the sample, other than that it is free of other Fe-containing phases. In it a single
parameter, δRT—the ‘centre of gravity’, or area weighted mean isomer shift at room
temperature, T = 295 ± 5 K—is extracted by curve-fitting a sample’s Mössbauer spectrum,
and is correlated to the sample’s composition or stoichiometry. We present data on highpurity
magnetite and maghemite powders, and mixtures thereof, as well as comparison
literature data from nanoparticulate mixtures and solid solutions, to show that a linear
correlation exists between δRT and the numerical proportion of Fe atoms in the magnetite
environment: α = Femagnetite/Fetotal = − ( ) δ δ RT o /m, where δo = 0.3206 ± 0.0022mm s−1
and m = 0.2135 ± 0.0076mm s−1
. We also present equations to relate α to the weight
percentage w of magnetite in mixed phases, and the magnetite stoichiometry x = Fe2+/Fe3+
in solid solutions. The analytical method is generally applicable, but is most accurate when
the absorption profiles are sharp; in some samples this may require spectra to be recorded
at reduced temperatures. We consider such cases and provide equations to relate δ ( ) T to the
corresponding α value
Evaluation of Methods to Characterize the Change of the Respiratory Sinus Arrhythmia with Age in Sleep Apnea Patients
The High Frequency (HF) band of the power spectrum of the Heart Rate Variability (HRV) is widely accepted to contain information related to the respiration. However, it is known that this often results in misleading estimations of the strength of the Respiratory Sinus Arrhythmia (RSA). In this paper, different approaches to characterize the change of the RSA with age, combining HRV and respiratory signals, are studied. These approaches are the bandwidths in the power spectral density estimations, bivariate phase rectified signal averaging, information dynamics, a time-frequency representation, and a heart rate decomposition based on subspace projections. They were applied to a dataset of sleep apnea patients, specifically to periods without apneas and during NREM sleep. Each estimate reflected a different relationship between RSA and age, suggesting that they all capture the cardiorespiratory information in a different way. The comparison of the estimates indicates that the approaches based on the extraction of respiratory information from HRV provide a better characterization of the age-dependent degradation of the RSA
Dephasing-induced diffusive transport in anisotropic Heisenberg model
We study transport properties of anisotropic Heisenberg model in a disordered
magnetic field experiencing dephasing due to external degrees of freedom. In
the absence of dephasing the model can display, depending on parameter values,
the whole range of possible transport regimes: ideal ballistic conduction,
diffusive, or ideal insulating behavior. We show that the presence of dephasing
induces normal diffusive transport in a wide range of parameters. We also
analyze the dependence of spin conductivity on the dephasing strength. In
addition, by analyzing the decay of spin-spin correlation function we discover
a presence of long-range order for finite chain sizes. All our results for a
one-dimensional spin chain at infinite temperature can be equivalently
rephrased for strongly-interacting disordered spinless fermions.Comment: 15 pages, 9 PS figure
A blended TROPOMI+GOSAT satellite data product for atmospheric methane using machine learning to correct retrieval biases
Satellite observations of dry-column methane mixing
ratios (XCH4) from shortwave infrared (SWIR) solar backscatter
radiation provide a powerful resource to quantify methane emissions in
service of climate action. The TROPOspheric Monitoring Instrument (TROPOMI), launched in October 2017,
provides global daily coverage at a 5.5 × 7 km2 (nadir) pixel
resolution, but its methane retrievals can suffer from biases associated with
SWIR surface albedo, scattering from aerosols and cirrus clouds, and
across-track variability (striping). The Greenhouse gases Observing SATellite (GOSAT) instrument, launched in 2009,
has better spectral characteristics and its methane retrieval is much less
subject to biases, but its data density is 250 times sparser than TROPOMI.
Here, we present a blended TROPOMI+GOSAT methane product obtained by
training a machine learning (ML) model to predict the difference between
TROPOMI and GOSAT co-located measurements, using only predictor variables
included in the TROPOMI retrieval, and then applying the correction to the
complete TROPOMI record from April 2018 to present. We find that the largest corrections are associated with coarse aerosol particles, high SWIR surface
albedo, and across-track pixel index. Our blended product corrects a
systematic difference between TROPOMI and GOSAT over water, and it features
corrections exceeding 10 ppb over arid land, persistently cloudy regions,
and high northern latitudes. It reduces the TROPOMI spatially variable bias
over land (referenced to GOSAT data) from 14.3 to 10.4 ppb at a
0.25∘ × 0.3125∘ resolution. Validation
with Total Carbon Column Observing Network (TCCON) ground-based column measurements shows reductions in variable
bias compared with the original TROPOMI data from 4.7 to 4.4 ppb and in
single-retrieval precision from 14.5 to 11.9 ppb. TCCON data are all in
locations with a SWIR surface albedo below 0.4 (where TROPOMI biases tend to be
relatively low), but they confirm the dependence of TROPOMI biases on SWIR
surface albedo and coarse aerosol particles, as well as the reduction of
these biases in the blended product. Fine-scale inspection of the Arabian
Peninsula shows that a number of hotspots in the original TROPOMI data are
removed as artifacts in the blended product. The blended product also
corrects striping and aerosol/cloud biases in single-orbit TROPOMI data,
enabling better detection and quantification of ultra-emitters. Residual
coastal biases can be removed by applying additional filters. The ML method
presented here can be applied more generally to validate and correct data
from any new satellite instrument by reference to a more established
instrument.</p
- …