550 research outputs found

    "Wet-to-Dry" Conformational Transition of Polymer Layers Grafted to Nanoparticles in Nanocomposite

    Get PDF
    The present communication reports the first direct measurement of the conformation of a polymer corona grafted around silica nano-particles dispersed inside a nanocomposite, a matrix of the same polymer. This measurement constitutes an experimental breakthrough based on a refined combination of chemical synthesis, which permits to match the contribution of the neutron silica signal inside the composite, and the use of complementary scattering methods SANS and SAXS to extract the grafted polymer layer form factor from the inter-particles silica structure factor. The modelization of the signal of the grafted polymer on nanoparticles inside the matrix and the direct comparison with the form factor of the same particles in solution show a clear-cut change of the polymer conformation from bulk to the nanocomposite: a transition from a stretched and swollen form in solution to a Gaussian conformation in the matrix followed with a compression of a factor two of the grafted corona. In the probed range, increasing the interactions between the grafted particles (by increasing the particle volume fraction) or between the grafted and the free matrix chains (decreasing the grafted-free chain length ratio) does not influence the amplitude of the grafted brush compression. This is the first direct observation of the wet-to-dry conformational transition theoretically expected to minimize the free energy of swelling of grafted chains in interaction with free matrix chains, illustrating the competition between the mixing entropy of grafted and free chains, and the elastic deformation of the grafted chains. In addition to the experimental validation of the theoretical prediction, this result constitutes a new insight for the nderstanding of the general problem of dispersion of nanoparticles inside a polymer matrix for the design of new nanocomposites materials

    Morphology of axisymmetric vesicles with encapsulated filaments and impurities

    Full text link
    The shape deformation of a three-dimensional axisymmetric vesicle with encapsulated filaments or impurities is analyzed by integrating a dissipation dynamics. This method can incorporate systematically the constraint of a fixed surface area and/or a fixed volume. The filament encapsulated in a vesicle is assumed to take a form of a rod or a ring so as to imitate cytoskeletons. In both cases, results of the shape transition of the vesicle are summarized in phase diagrams in the phase space of the vesicular volume and a rod length or a ring radius. We also study the dynamics of a vesicle with impurities coupled to the membrane curvature. The phase separation and the associated shape deformation in the early stage of the dynamical evolution can well be explained by the linear stability analysis. Long runs of simulation demonstrate the nonlinear coarsening of the wavy deformation of the vesicle in the late stage.Comment: 9 pages, 9 figure

    Zooming In on the Progenitors of Superluminous Supernovae With the HST

    Full text link
    We present Hubble Space Telescope (HST) rest-frame ultraviolet imaging of the host galaxies of 16 hydrogen-poor superluminous supernovae (SLSNe), including 11 events from the Pan-STARRS Medium Deep Survey. Taking advantage of the superb angular resolution of HST, we characterize the galaxies' morphological properties, sizes and star formation rate (SFR) densities. We determine the supernova (SN) locations within the host galaxies through precise astrometric matching, and measure physical and host-normalized offsets, as well as the SN positions within the cumulative distribution of UV light pixel brightness. We find that the host galaxies of H-poor SLSNe are irregular, compact dwarf galaxies, with a median half-light radius of just 0.9 kpc. The UV-derived SFR densities are high ( ~ 0.1 M_sun/yr/kpc^2), suggesting that SLSNe form in overdense environments. Their locations trace the UV light of their host galaxies, with a distribution intermediate between that of long-duration gamma-ray bursts (LGRBs) (which are strongly clustered on the brightest regions of their hosts) and a uniform distribution (characteristic of normal core-collapse SNe), though cannot be statistically distinguished from either with the current sample size. Taken together, this strengthens the picture that SLSN progenitors require different conditions than those of ordinary core-collapse SNe to form, and that they explode in broadly similar galaxies as do LGRBs. If the tendency for SLSNe to be less clustered on the brightest regions than are LGRBs is confirmed by a larger sample, this would indicate a different, potentially lower-mass progenitor for SLSNe than LRGBs.Comment: ApJ in press; matches published version. Minor changes following referee's comments; conclusions unchange

    Orientational phase transitions in the hexagonal phase of a diblock copolymer melt under shear flow

    Get PDF
    We generalize the earlier theory by Fredrickson [J. Rheol. v.38, 1045 (1994)] to study the orientational behaviour of the hexagonal phase of diblock copolymer melt subjected to steady shear flow. We use symmetry arguments to show that the orientational ordering in the hexagonal phase is a much weaker effect than in the lamellae. We predict the parallel orientation to be stable at low and the perpendicular orientation at high shear rates. Our analysis reproduces the experimental results by Tepe et al. [Macromolecules v.28, 3008 (1995)] and explains the difficulties in experimental observation of the different orientations in the hexagonal phase.Comment: 21 pages, 6 eps figures, submitted to Physical Review

    Superconducting Fluxon Pumps and Lenses

    Full text link
    We study stochastic transport of fluxons in superconductors by alternating current (AC) rectification. Our simulated system provides a fluxon pump, "lens", or fluxon "rectifier" because the applied electrical AC is transformed into a net DC motion of fluxons. Thermal fluctuations and the asymmetry of the ratchet channel walls induce this "diode" effect, which can have important applications in devices, like SQUID magnetometers, and for fluxon optics, including convex and concave fluxon lenses. Certain features are unique to this novel two-dimensional (2D) geometric pump, and different from the previously studied 1D ratchets.Comment: Phys. Rev. Lett. 83, in press (1999); 4 pages, 5 .gif figures; figures also available at http://www-personal.engin.umich.edu/~nori/ratche

    Three and four current reversals versus temperature in correlation ratchets with a simple sawtooh potential

    Full text link
    Transport of Brownian particles on a simple sawtooth potential subjected to both unbiased thermal and nonequilibrium symmetric three-level Markovian noise is considered. The new effects of three and four current reversals as a function of temperature are established in such correlation ratchets. The parameter space coordinates of the fixed points associated with these current reversals and the necessary and sufficient conditions for the existence of the novel current reversals are found.Comment: 4 pages, 5 figures; some changes introduced; accepted for publication in Physical Review

    Interactions between proteins bound to biomembranes

    Full text link
    We study a physical model for the interaction between general inclusions bound to fluid membranes that possess finite tension, as well as the usual bending rigidity. We are motivated by an interest in proteins bound to cell membranes that apply forces to these membranes, due to either entropic or direct chemical interactions. We find an exact analytic solution for the repulsive interaction between two similar circularly symmetric inclusions. This repulsion extends over length scales of order tens of nanometers, and contrasts with the membrane-mediated contact attraction for similar inclusions on tensionless membranes. For non circularly symmetric inclusions we study the small, algebraically long-ranged, attractive contribution to the force that arises. We discuss the relevance of our results to biological phenomena, such as the budding of caveolae from cell membranes and the striations that are observed on their coats.Comment: 22 pages, 2 figure

    Spontaneous Oscillations of Collective Molecular Motors

    Full text link
    We analyze a simple stochastic model to describe motor molecules which cooperate in large groups and present a physical mechanism which can lead to oscillatory motion if the motors are elastically coupled to their environment. Beyond a critical fuel concentration, the non-moving state of the system becomes unstable with respect to a mode with angular frequency omega. We present a perturbative description of the system near the instability and demonstrate that oscillation frequencies are determined by the typical timescales of the motors.Comment: 11 pages, Revtex, 4 pages Figure

    Force Dependence of the Michaelis Constant in a Two-State Ratchet Model for Molecular Motors

    Full text link
    We present a quantitative analysis of recent data on the kinetics of ATP hydrolysis, which has presented a puzzle regarding the load dependence of the Michaelis constant. Within the framework of coarse grained two-state ratchet models, our analysis not only explains the puzzling data, but provides a modified Michaelis law, which could be useful as a guide for future experiments.Comment: 4 pages, 3 eps figures, accepted for publication on Physical Review Letter

    Euler buckling in red blood cells: An optically driven biological micromotor

    Full text link
    We investigate the physics of an optically-driven micromotor of biological origin. A single, live red blood cell, when placed in an optical trap folds into a rod-like shape. If the trapping laser beam is circularly polarized, the folded RBC rotates. A model based on the concept of buckling instabilities captures the folding phenomenon; the rotation of the cell is simply understood using the Poincar\`e sphere. Our model predicts that (i) at a critical intensity of the trapping beam the RBC shape undergoes large fluctuations and (ii) the torque is proportional to the intensity of the laser beam. These predictions have been tested experimentally. We suggest a possible mechanism for emergence of birefringent properties in the RBC in the folded state
    corecore