408 research outputs found
Fresh water generation from aquifer-pressured carbon storage: Feasibility of treating saline formation waters
AbstractBrines up to 85,000 ppm total dissolved solids produced during Carbon Capture and Storage (CCS) operations in saline formations may be used as the feedstock for desalination and water treatment technologies via reverse osmosis (RO). The aquifer pressure resulting from the injection of carbon dioxide can provide all or part of the inlet pressure for the desalination system. Residual brine from such a process could be reinjected into the formation at net volume reduction, such that the volume of fresh water extracted is comparable to the volume of CO2 injected into the formation. Such a process could provide additional CO2 storage capacity in the aquifer, reduce operational risks (e.g., fracturing, seismicity, leaking) by relieving overpressure in the formation, and provide a source of low-cost fresh water to offset costs or operational water needs equal to about half the water usage of a typical coal ICGG power plant. We call the combined processes of brine removal, treatment, and pressure management active reservoir management. We have examined a range of saline formation water compositions propose a general categorization for the feasibility of the process based total dissolved solids (TDS): •10,000–40,000 mg/L TDS: Standard RO with ≥50% recovery•40,000–85,000 mg/L TDS: Standard RO with ≥10% recovery; higher recovery possible using 1500 psi RO membranes and/or multi-stage incremental desalination likely including NF (nanofiltration)•85,000–300,000 mg/L TDS: Multi-stage process using process design that may differ significantly from seawater systems•>300,000 mg/L TDS brines: Not likely to be treatable Brines in the 10,000–85,000 mg/L TDS range appear to be abundant (geographically and with depth) and could be targeted in planning CCS operations. Costs for desalination of fluids from saline aquifers are in the range of 1000–1400/acre foot. Costs increase by 30 to 50% when pressure must be added at the surface. The primary reason for the cost reduction in pressurized aquifers relative to seawater is the lack of need for energy to drive the high-pressure pumps. An additional cost savings has to do with less pre-treatment than is customary for ocean waters full of biological activity and their degradation products. An innovative parallel low-recovery approach is proposed that would be particularly effective for saline formation waters in the 40,000–85,000 mg/L TDS range
Recommended from our members
CO2 capture in primary and tertiary amines - insights from atomistic modeling
Recommended from our members
Late-phase melt progression experiment: MP-2. Results and analysis
In-pile experiments addressing late-phase processes in Light Water Reactors (LWRs) were performed in the Annular Core Research Reactor (ACRR) at Sandia National Laboratories. Melt Progression (MP) experiments were designed to provide information to develop and verify computer models for analysis of LWR core damage in severe accidents. Experiments examine the formation and motion of ceramic molten pools in disrupted reactor core regions. The MP-2 experiment assembly consisted of: (1) a rubble bed of enriched UO{sub 2} and ZrO{sub 2} simulating severely disrupted reactor core regions, (2) a ceramic/metallic crust representing blockage formed by early phase melting, relocation, and refreezing of core components, and (3) an intact rod stub region that remained in place below the blockage region. The test assembly was fission heated in the central cavity of the ACRR at an average rate of about 0.2 KA, reaching a peak molten pool temperature around 3400 K. Melting of the debris bed ceramic components was initiated near the center of the bed. The molten material relocated downward, refreezing to form a ceramic crust near the bottom of the rubble bed. As power levels were increased, the crust gradually remelted and reformed at progressively lower positions in the bed until late in the experiment when it penetrated into and attacked the ceramic/metallic blockage. The metallic components of the blockage region melted and relocated to the bottom of the intact rod stub region before the ceramic melt penetrated the blockage region from above. The ceramic pool penetrated halfway into the blockage region by the end of the experiment. Measurements of thermal response and material relocation are compared to the results of the computer simulations. Postexperiment examination of the assembly with the associated material interactions and metallurgy are also discussed in detail with the analyses and interpretation of results. 16 refs., 206 figs., 24 tabs
European Stroke Organisation (ESO) Guidelines on Management of Unruptured Intracranial Aneurysms
Unruptured intracranial aneurysms (UIA) occur in around 3% of the population. Important management questions concern if and how to perform preventive UIA occlusion; if, how and when to perform follow up imaging and non-interventional means to reduce the risk of rupture. Using the Standard Operational Procedure of ESO we prepared guidelines according to GRADE methodology. Since no completed randomised trials exist, we used interim analyses of trials, and meta-analyses of observational and case-control studies to provide recommendations to guide UIA management. All recommendations were based on very low evidence. We suggest preventive occlusion if the estimated 5-year rupture risk exceeds the risk of preventive treatment. In general, we cannot recommend endovascular over microsurgical treatment, but suggest flow diverting stents as option only when there are no other low-risk options for UIA repair. To detect UIA recurrence we suggest radiological follow up after occlusion. In patients who are initially observed, we suggest radiological monitoring to detect future UIA growth, smoking cessation, treatment of hypertension, but not treatment with statins or acetylsalicylic acid with the indication to reduce the risk of aneurysm rupture. Additionally, we formulated 15 expert-consensus statements. All experts suggest to assess UIA patients within a multidisciplinary setting (neurosurgery, neuroradiology and neurology) at centres consulting >100 UIA patients per year, to use a shared decision-making process based on the team recommendation and patient preferences, and to repair UIA only in centres performing the proposed treatment in >30 patients with (ruptured or unruptured) aneurysms per year per neurosurgeon or neurointerventionalist. These UIA guidelines provide contemporary recommendations and consensus statement on important aspects of UIA management until more robust data come available.info:eu-repo/semantics/publishedVersio
CFD analysis of coolant mixing in VVER-1000/V320 reactor pressure vessel
This study presents a code-to-code and model-to-model comparison of coolant mixing in the VVER-1000/V320 Kozloduy Unit 6 nuclear power plant using Computational Fluid Dynamics (CFD). Four different CFD codes were used to simulate coolant mixing in the reactor vessel, namely ANSYS Fluent, ANSYS CFX, TrioCFD, and STAR-CCM+. Two different approaches were used to model the upper plenum, while a single simplified model was
used for the reactor pressure vessel. The simulations were performed for VVER-1000 coolant transient benchmark (V1000CT-2) mixing exercise. The results were compared between the different CFD codes and models to assess the accuracy and consistency of the simulations with the available experimental data. Overall, the results showed good agreement between the different CFD codes and models, with minor differences observed in some cases. The simplified models were found to be sufficient for predicting the overall coolant mixing patterns observed in the reactor vessel, provided additional insights into the local flow structures and mixing characteristics. This study demonstrates the applicability and reliability of CFD simulations for coolant mixing analysis in VVER-1000/V320 nuclear power plants
Primary liver cancer is more aggressive in HIV-HCV coinfection than in HCV infection. A prospective study (ANRS CO13 Hepavih and CO12 Cirvir)
OBJECTIVE: Since HAART, primary liver cancer has emerged as an increasing cause of morbidity and mortality in patients with HIV infection. Our aim was to compare characteristics and outcome of primary liver cancer according to HIV status in HCV cirrhotic patients submitted to periodic ultrasonographic surveillance.
METHODS: All patients with primary liver cancer and cirrhosis were selected from two prospective cohorts (ANRS CO12 Cirvir, viral cirrhosis, n=1081; ANRS CO13 Hepavih, HIV-HCV coinfection, n=1175). Cirrhosis was diagnosed by liver biopsy in monoHCV group and biopsy and/or non-invasive tests in HIV-HCV group. Ultrasonographic surveillance was performed every 6 months. Diagnosis of primary liver cancer was established according to EASL-AASLD guidelines.
RESULTS: Primary liver cancer was diagnosed in 32 patients, 16 in each group, and corresponded to hepatocellular carcinoma in all except for two cholangiocarcinomas in HIV-HCV patients. Ultrasonographic follow-up was similar (median time since last ultrasonographic without focal lesion: 237 days in HIV-HCV group (n=12) versus 208 days in HCV group, NS). At primary liver cancer diagnosis HIV-HCV patients were markedly younger (48 vs. 60 yrs, P<0.001), primary liver cancer was more advanced in HIV-HCV patients (single nodule: 43% vs. 75%, P=0.07; mean diameter of main nodule: 24 vs. 16 mm, P=0.006; portal obstruction: 3 vs. 0). Curative treatment was performed in four HIV-HCV patients versus 11 HCV patients (P=0.017). During follow-up, 10 HIV-HCV patients died versus only one HCV patient (P=0.0005).
CONCLUSIONS: This result suggests more aggressiveness for tumors in HIV infected patients and, if confirmed, could result in shortening the length between ultrasonographic examinations
Recommended from our members
Evidence of gating in hundred nanometer diameter pores: an experimental and theoretical study
We report on the observation of an unexpected gating mechanism at the 100 nm scale on track-etched polycarbonate membranes. Transport measurements of methyl viologen performed by absorption spectroscopy under various pH conditions demonstrated that perfect gating was achieved for 100 nm diameter pores at pH 2, while the positively charged molecular ions moved through the membrane according to diffusion laws at pH 5. An oppositely charged molecular ion, naphthalene disulfonate, in the same membrane, showed the opposite trend: diffusion of the negative ion at pH 2 and perfect gating at pH 5. The influence of parameters such as ionic strength and membrane surface coating were also investigated. A theoretical study of the system shows that at this larger length scale the magnitude of the electric field in the vicinity of the pores is too small to account for the experimental observations, rather, it is the surface trapping of the mobile ion (Cl{sup -} or Na{sup +}) which gives rise to the gating phenomena. This surprising effect might have potential applications for high-throughput separation of large molecules and bio-organisms
Circuitous embolic hemorrhagic stroke: carotid pseudoaneurysm to fetal posterior cerebral artery conduit: a case report
- …