Fragility and compressibility at the glass transition

Isothermal compressibilities and Brillouin sound velocities from the literature allow to separate the compressibility at the glass transition into a high-frequency vibrational and a low-frequency relaxational part. Their ratio shows the linear fragility relation discovered by x-ray Brillouin scattering [1], though the data bend away from the line at higher fragilities. Using the concept of constrained degrees of freedom, one can show that the vibrational part follows the fragility-independent Lindemann criterion; the fragility dependence seems to stem from the relaxational part. The physical meaning of this finding is discussed. [1] T. Scopigno, G. Ruocco, F. Sette and G. Monaco, Science 302, 849 (2003)Comment: 4 pages, 2 figures, 2 tables, 33 references. Slightly changed after refereein

Deforming glassy polystyrene: Influence of pressure, thermal history, and deformation mode on yielding and hardening

The toughness of a polymer glass is determined by the interplay of yielding, strain softening, and strain hardening. Molecular-dynamics simulations of a typical polymer glass, atactic polystyrene, under the influence of active deformation have been carried out to enlighten these processes. It is observed that the dominant interaction for the yield peak is of interchain nature and for the strain hardening of intrachain nature. A connection is made with the microscopic cage-to-cage motion. It is found that the deformation does not lead to complete erasure of the thermal history but that differences persist at large length scales. Also we find that the strain-hardening modulus increases with increasing external pressure. This new observation cannot be explained by current theories such as the one based on the entanglement picture and the inclusion of this effect will lead to an improvement in constitutive modeling

Brief report: Thought disorder in asperger syndrome: Comparison with high-functioning autism

Asperger syndrome (AS) is a pervasive developmental disorder generally regarded as a variant of autism. While it has been included in the ICD-10 and DSM-IV as a distinct diagnostic entity, it is still unclear to what extent it differs from highfunctioning autism (HFA). Persons with HFA have been reported to show a variety of deficits of thought processes. Abnormalities such as poor reality testing, perceptual distortions, and areas of cognitive slippage have been described using the Rorschach inkblot test (Dykens, Volkmar, & Glick, 1991). Since AS has been conceptualized as a mild variant of autism, we hypothesized that persons with AS will have fewer abnormalities on the Rorschach test compared to persons with HFA. To test this hypothesis, we compared 12 subjects with AS (ICD-10, 10 male, mean age = 12.2±3.3 years, mean full-scale IQ = 99.6) with 8 subjects with HFA (ICD-10/DSM-III-R, 7 male, mean age = 12.2±3.8 years, mean fullscale IQ = 83.4) on the Rorschach test. AS subjects demonstrated a trend towards greater levels of disorganized thinking than the HFA group. They were also more likely to be classified as “Introversive” suggesting that AS subjects may have more complex inner lives involving elaborate fantasies. Also, AS subjects tended to be more focused on their internal experiences. However, overall, the Rorschach test was not found to differentiate the two diagnostic groups on the majority of structural variables. Implications of these findings are discussed with regard to the diagnostic validity of Asperger syndrome .Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/44611/1/10803_2005_Article_BF02179292.pd

Analysis of equations of state for polymers

AbstractIn the literature there are several studies comparing the accuracy of various models in describing the PvT behavior of polymers. However, most of these studies do not provide information about the quality of the estimated parameters or the sensitivity of the prediction of thermodynamic properties to the parameters of the equations. Furthermore, there are few studies exploring the prediction of thermal expansion and compression coefficients. Based on these observations, the objective of this study is to deepen the analysis of Tait, HH (Hartmann-Haque), MCM (modified cell model) and SHT (simplified hole theory) equations of state in predicting the PvT behavior of polymers, for both molten and solid states. The results showed that all equations of state provide an adequate description of the PvT behavior in the molten state, with low standard deviations in the estimation of parameters, adequate sensitivity of their parameters and plausible prediction of specific volume, thermal expansion and isothermal compression coefficients. In the solid state the Tait equation exhibited similar performance to the molten state, while HH showed satisfactory results for amorphous polymers and difficulty in adjusting the PvT curve for semicrystalline polymers.</p

Dispersion and release of embelin from electrospun biodegradable, polymeric, membranes

In this work, microfiber meshes containing embelin, a poorly water-soluble bioactive agent, were prepared by solubilizing embelin in a biodegradable and biocompatible polymer matrix of poly(ε-caprolactone) (PCL). Plain or drug-loaded, highly porous, fibrous membranes with a high area-to-volume ratio were obtained by electrospinning. Non-woven microfibrous meshes were formed by uniform bead-free fibers with a mean diameter of 1.2 μm. Non-porous films were obtained by solution casting, and were used for comparison. The drug-loading content of the prepared systems was appropriate for topical applications. The thermal properties revealed that the crystallinity of embelin significantly decreased, the drug having almost completely dissolved in the PCL fibers. The in situ bioavailability of embelin, an antimycotic agent, is an important aspect to consider in topical drug applications. The drug-loaded systems presented different contact areas with the biological environment. When comparing the ability to expose embelin with the biological environment of the prepared systems, drug-loaded fibrous scaffolds showed a higher bioavailability of the bioactive agent because of an increase by 86% in the area-to-volume ratio, providing an effective area per unit mass that was 5.8-fold higher than that of the film. For the meshes, 90% embelin release was observed after 12h of exposure to phosphate-buffered saline, whereas for the films a comparable level of release occurred only after 72h.Fil: Cortez Tornello, Pablo Roberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de San Juan. Facultad de Ingeniería. Instituto de Biotecnología; ArgentinaFil: Feresin, Gabriela Egly. Universidad Nacional de San Juan. Facultad de Ingeniería. Instituto de Biotecnología; ArgentinaFil: Tapia, Alejandro. Universidad Nacional de San Juan. Facultad de Ingeniería. Instituto de Biotecnología; ArgentinaFil: Veiga, Itiara G.. Universidade Estadual de Campinas; BrasilFil: Moraes, Ângela M.. Universidade Estadual de Campinas; BrasilFil: Abraham, Gustavo Abel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Cuadrado, Teresita Raquel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentin

Review of experimental methods to determine spontaneous combustion susceptibility of coal – Indian context

This paper presents a critical review of the different techniques developed to investigate the susceptibility of coal to spontaneous combustion and fire. These methods may be sub-classified into the two following areas: (1) Basic coal characterisation studies (chemical constituents) and their influence on spontaneous combustion susceptibility. (2) Test methods to assess the susceptibility of a coal sample to spontaneous combustion. This is followed by a critical literature review that summarises previous research with special emphasis given to Indian coals

Chemical Diversity and Complexity of Scotch Whisky as Revealed by High-Resolution Mass Spectrometry

Scotch Whisky is an important product, both culturally and economically. Chemically, Scotch Whisky is a complex mixture, which comprises thousands of compounds, the nature of which are largely unknown. Here, we present a thorough overview of the chemistry of Scotch Whisky as observed by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Eighty-five whiskies, representing the majority of Scotch Whisky produced and sold, were analyzed by untargeted high-resolution mass spectrometry. Thousands of chemical formulae were assigned for each sample based on parts-per-billion mass accuracy of FT-ICR MS spectra. For the first time, isotopic fine structure analysis was used to confirm the assignment of high molecular weight CHOS species in Scotch Whisky. The assigned spectra were compared using a number of visualization techniques, including van Krevelen diagrams, double bond equivalence (DBE) plots, as well as heteroatomic compound class distributions. Additionally, multivariate analysis, including PCA and OPLS-DA, was used to interpret the data, with key compounds identified for discriminating between types of whisky (blend or malt) or maturation wood type. FT-ICR MS analysis of Scotch Whisky was shown to be of significant potential in further understanding of the complexity of mature spirit drinks and as a tool for investigating the chemistry of the maturation processes. [Figure: see text] ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s13361-016-1513-y) contains supplementary material, which is available to authorized users

A Family History Study of Asperger Syndrome

Asperger syndrome (AS) is a childhood-onset disorder often described as a mild variant of autism. Although classified as a distinct disorder in the DSM-IV, its overlap with autism continues to be a matter of ongoing debate. While the family genetic origins of autism are well established, few studies have investigated this topic in AS using current operational criteria. In this report, we examined the family psychiatric history of 58 subjects with AS diagnosed according to DSM-IV criteria (48 males; mean age 13.34; mean full scale IQ 104.87). All subjects had a history of mild autistic social deficits; focused special interests; normal level of intelligence; and an odd and often pedantic manner of speaking. None had a previous diagnosis of autism. Of the 58 subjects with Asperger syndrome, three had first degree relatives with AS; nine (15%) had a family history of schizophrenia; and 35 (60%) had a family history of depression. Of the 64 siblings, four had a diagnosis of AS and none of autism. Compared with a group of 39 subjects with normal intelligence autism (high functioning autism, HFA; 33 males; mean age 15.34; mean full scale IQ 85.89) subjects with AS were more likely to have relatives with depression; schizophrenia; and the broader autistic phenotype. Possible reasons for and implications of these findings are discussed.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/44625/1/10803_2004_Article_1996.pd