185 research outputs found
An ISPA-camera for gamma rays
With the recently developed ISPA (Imaging Silicon Pixel Array)-tube attached either to a planar YAlO3(Ce) (YAP) disc (1mm thick) or to a matrix of optically-separated YAP-crystals (5mm high, 0.6 x 0.6 mm2 cross-section) we achieved high spatial resolution of 57Co-122 keV photons. The vacuum-sealed ISPA-tube is only 4 cm long with 3.5 cm diameter and consists of a photocathode viewed at 3 cm distance by a silicon pixel chip, directly detecting the photoelectrons. The chip-anode consists of 1024 rectangular pixels with 75 ”m x 500 ”m edges, each bump-bonded to their individual front-end electronics. The total pixel array read-out time is 10 ”s. The measured intrinsic spatial resolutions (FWHM) of this ISPA-camera are 700 ”m (planar YAP) and 310 ”m (YAP-matrix). Apart from its already demonstrated application for particle tracking with scintillating fibres, the ISPA-tube provides also an excellent tool in medicine, biology and chemistry
A HPMT based set-up to characterize scintillating crystals
We have developed a fully automatic measurement set-up, capable of measuring light yields arising from scintillating crystals in a linear range of about four orders of magnitude. The photodetector is a Hybrid Photomultiplier Tube especially developed to optimize linear range and photon detection. Crystal and photodetector are temperature controlled by a closed water circuit, as this is essential when measuring low light yield scintillating crystals with a marked temperature dependence of their light yield. Gamma sources can be placed either on top or on the side of the crystal. In this latter case, the source can be automatically moved by a computer-controlled step motor to provide a uniformity profile of the light yield along the crystal. Tagged and not-tagged operation modes are possible. The whole set-up is computer-controlled in an effort to provide fast and reliable measurements, to characterize many crystals per day. This is important for the quality control of the Lead Tungstate crystals that will be applied in the electromagnetic calorimeter of the CMS-detector at the LHC at CERN
Analysis and correction of the magnetic field effects in the Hybrid Photo-Detectors of the RICH2 Ring Imaging Cherenkov detector of LHCb
The Ring Imaging Cherenkov detectors of the LHCb experiment at the Large
Hadron Collider at CERN are equipped with Hybrid Photo-Detectors. These vacuum
photo-detectors are affected by the stray magnetic field of the LHCb magnet,
which degrades their imaging properties. This effect increases the error on the
Cherenkov angle measurement and would reduce the particle identification
capabilities of LHCb. A system has been developed for the RICH2 Ring Imaging
Cherenkov detector to perform a detailed characterisation of the magnetic
distortion effects. It is described, along with the methods implemented to
correct for these effects, restoring the optimal resolution.Comment: 16 pages, 11 figure
The TORCH time-of-flight detector
AbstractThe TORCH time-of-flight detector is being developed to provide particle identification between 2 and 10GeV/c momentum over a flight distance of 10m. TORCH is designed for large-area coverage, up to 30m2, and has a DIRC-like construction. The goal is to achieve a 15ps time-of-flight resolution per incident particle by combining arrival times from multiple Cherenkov photons produced within quartz radiator plates of 10mm thickness. A four-year R&D programme is underway with an industrial partner (Photek, UK) to produce 53Ă53mm2 Micro-Channel Plate (MCP) detectors for the TORCH application. The MCP-PMT will provide a timing accuracy of 40ps per photon and it will have a lifetime of up to at least 5Ccmâ2 of integrated anode charge by utilizing an Atomic Layer Deposition (ALD) coating. The MCP will be read out using charge division with customised electronics incorporating the NINO chipset. Laboratory results on prototype MCPs are presented. The construction of a prototype TORCH module and its simulated performance are also described
Glass-Coated Beryllium Mirrors for the LHCb RICH1 Detector
The design, manufacture and testing of lightweight glass-coated beryllium spherical converging mirrors for the RICH1 detector of LHCb are described. The mirrors need to be lightweight to minimize the material budget and fluorocarbon-compatible to avoid degradation in the RICH1 C4F10 gas radiator. Results of the optical measurements for the small-sized prototypes and for the first full-sized prototype mirror are reported
Test-beam and laboratory characterisation of the TORCH prototype detector
The TORCH time-of-flight (TOF) detector is being developed to provide particle identification up to a momentum of 10 GeV/c over a flight distance of 10 m. It has a DIRC-like construction with View the MathML source10mm thick synthetic amorphous fused-silica plates as a Cherenkov radiator. Photons propagate by total internal reflection to the plate periphery where they are focused onto an array of customised position-sensitive micro-channel plate (MCP) detectors. The goal is to achieve a 15 ps time-of-flight resolution per incident particle by combining arrival times from multiple photons. The MCPs have pixels of effective size 0.4 mmĂ6.6 mm2 in the vertical and horizontal directions, respectively, by incorporating a novel charge-sharing technique to improve the spatial resolution to better than the pitch of the readout anodes. Prototype photon detectors and readout electronics have been tested and calibrated in the laboratory. Preliminary results from testbeam measurements of a prototype TORCH detector are also presented
Test of the photon detection system for the LHCb RICH Upgrade in a charged particle beam
The LHCb detector will be upgraded to make more efficient use of the
available luminosity at the LHC in Run III and extend its potential for
discovery. The Ring Imaging Cherenkov detectors are key components of the LHCb
detector for particle identification. In this paper we describe the setup and
the results of tests in a charged particle beam, carried out to assess
prototypes of the upgraded opto-electronic chain from the Multi-Anode PMT
photosensor to the readout and data acquisition system.Comment: 25 pages, 22 figure
- âŠ