Simulating accelerated atoms coupled to a quantum field

We show an analogy between static quantum emitters coupled to a single mode of a quantum field and accelerated Unruh-DeWitt detectors. We envision a way to simulate a variety of relativistic quantum field settings beyond the reach of current computational power, such as high number of qubits coupled to a quantum field following arbitrary non-inertial trajectories. Our scheme may be implemented with trapped ions and circuit QED set-ups.Comment: 5 pages, 2 figures, revtex 4-

Performance and Safety of Lithium-ion Capacitors

Lithium-ion capacitors (LIC) are a recent innovation in the area of supercapacitors and ultracapacitors. With an operating voltage range similar to that of lithium-ion batteries and a very low selfdischarge rate, these can be readily used in the place of batteries especially when large currents are required to be stored safely for use at a later time

Towards a robotic personal trainer for the elderly

The use of robots in the environment of the elderly has grown significantly in recent years. The idea is to try to increase the comfort and well-being of older people through the employment of some kind of automated processes that simplify daily work. In this paper we present a prototype of a personal robotic trainer which, together with a non-invasive sensor, allows caregivers to monitor certain physical activities in order to improve their performance. In addition, the proposed system also takes into account how the person feels during the performance of the physical exercises and thus, determine more precisely if the exercise is appropriate or not for a specific person.This work was partly supported by the Spanish Government (RTI2018-095390-B-C31) and FCT—Fundação para a Ciência e Tecnologia through the Post-Docscholarship SFRH/BPD/102696/2014 (A. Costa) and UID/CEC/00319/2019

A Complete Spectroscopic Survey of the Milky Way satellite Segue 1: Dark matter content, stellar membership and binary properties from a Bayesian analysis

We introduce a comprehensive analysis of multi-epoch stellar line-of-sight velocities to determine the intrinsic velocity dispersion of the ultrafaint satellites of the Milky Way. Our method includes a simultaneous Bayesian analysis of both membership probabilities and the contribution of binary orbital motion to the observed velocity dispersion within a 14-parameter likelihood. We apply our method to the Segue 1 dwarf galaxy and conclude that Segue 1 is a dark-matter-dominated galaxy at high probability with an intrinsic velocity dispersion of 3.7^{+1.4}_{-1.1} km/sec. The dark matter halo required to produce this dispersion must have an average density of 2.5^{+4.1}_{-1.9} solar mass/pc^3 within a sphere that encloses half the galaxy's stellar luminosity. This is the highest measured density of dark matter in the Local Group. Our results show that a significant fraction of the stars in Segue 1 may be binaries with the most probable mean period close to 10 years, but also consistent with the 180 year mean period seen in the solar vicinity at about 1 sigma. Despite this binary population, the possibility that Segue 1 is a bound star cluster with the observed velocity dispersion arising from the orbital motion of binary stars is disfavored by the multi-epoch stellar velocity data at greater than 99% C.L. Finally, our treatment yields a projected (two-dimensional) half-light radius for the stellar profile of Segue 1 of 28^{+5}_{-4} pc, in excellent agreement with photometric measurements.Comment: 15 pages, 19 figure

Macropore Formation and Pore Morphology Characterization of Heavily Doped p-Type Porous Silicon

Tuning the pore diameter of porous silicon films is essential for some applications such as biosensing, where the pore size can be used for filtering analytes or to control the biofunctionalization of its walls. However, macropore (>50nm) formation on p-type silicon is not yet fully controlled due to its strong dependence on resistivity. Electrochemical etching of heavily doped p-type silicon usually forms micropores (<5nm), but it has been found that bigger sizes can be achieved by adding an organic solvent to the electrolyte. In this work, we compare the results obtained when adding dimethylformamide (DMF) and dimethylsulfoxide (DMSO) to the electrolyte as well as the effect of a post-treatment of the sample with potasium hydroxide (KOH) and sodium hydroxide (NaOH) for macropore formation in p-type silicon with resistivities between 0.001 and 10Ω·cm, achieving pore sizes from 5 to 100nm

Association between chronic irritability and depressive symptoms in children and adolescents.

Association between chronic irritability and depressive symptoms in children and adolescents. Busto-Garrido, M.; Gutierrez-Castillo, D; Navas- Gonzalez, JR; Gutierrez-Bedmar, M; Gutierrez-Casares, JR; Martin-Lunar, MT; Rodríguez-Rosado, A; Pena-Andreu, JM. European Psychiatry 415(2017) 5221.Chronic irritability is the most frequently reported symptom in child and adolescent depression. The association of both has been linked with high rates of chronicity, comorbility and impairment. Objectives To study the association between chronic irritability and depressive symptoms in children and adolescents. Methods We have studied 857 participants recruited from the only Child and Adolescent Mental Health Clinic in a catchment area of 122968 people under 18 (2004-2010). A sample of 677 participants (57 controls and 620 patients) was included to carry out a cross-sectional study. Chronic irritability was measured by a Visual Analog Scale (VAS irritability) -scored from 0 to 10-, and depressive symptoms by the Children's Depression Inventory (CDI). The participants were categorized into controls and patients, and according to their chronic irritability (≤4 [I],5 [II] and ≥6 [III]). The mean of CDI score was calculated for each of the groups, adjusted by sex and age, and analyzed by ANCOVA. Results The following means were obtained from the controls: 13,71 (group I), 9,82 (group II) and 17,45 (group III). Regarding to the patients: 13,92 (group I), 11,54 (group II) and 15,64 (group III). A quadratic association (p <0,0015) was found between VAS irritability score and CDI score. Conclussions There is not a lineal association between chronic irritability and depressive symptoms in children and adolescent. High rates of depressive symptoms were associated both with high and low rates of irritability. Several questions remain unexplained about the status of irritability in psychiatry as Stringaris group has been pointed out. Disclosure statement I have no potential conflict of interest to discloseUniversidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Polarization entangled photon-pair source based on a type-II PPLN waveguide emitting at a telecom wavelength

We report the realization of a fiber coupled polarization entangled photon-pair source at 1310 nm based on a birefringent titanium in-diffused waveguide integrated on periodically poled lithium niobate. By taking advantage of a dedicated and high-performance setup, we characterized the quantum properties of the pairs by measuring two-photon interference in both Hong-Ou-Mandel and standard Bell inequality configurations. We obtained, for the two sets of measurements, interference net visibilities reaching nearly 100%, which represent important and competitive results compared to similar waveguide-based configurations already reported. These results prove the relevance of our approach as an enabling technology for long-distance quantum communication.Comment: 13 pages, 4 figures, to appear in New Journal of Physic

Universal Shape Replicators via Self-Assembly with Attractive and Repulsive Forces

We show how to design a universal shape replicator in a self- assembly system with both attractive and repulsive forces. More precisely, we show that there is a universal set of constant-size objects that, when added to any unknown holefree polyomino shape, produces an unbounded number of copies of that shape (plus constant-size garbage objects). The constant-size objects can be easily constructed from a constant number of individual tile types using a constant number of preprocessing self-assembly steps. Our construction uses the well-studied 2-Handed Assembly Model (2HAM) of tile self-assembly, in the simple model where glues interact only with identical glues, allowing glue strengths that are either positive (attractive) or negative (repulsive), and constant temperature (required glue strength for parts to hold together). We also require that the given shape has specified glue types on its surface, and that the feature size (smallest distance between nonincident edges) is bounded below by a constant. Shape replication necessarily requires a self-assembly model where parts can both attach and detach, and this construction is the first to do so using the natural model of negative/repulsive glues (also studied before for other problems such as fuel-efficient computation); previous replication constructions require more powerful global operations such as an “enzyme” that destroys a subset of the tile types.National Science Foundation (U.S.) (Grant EFRI1240383)National Science Foundation (U.S.) (Grant CCF-1138967