11,840 research outputs found

    High-temperature thermal storage systems for advanced solar receivers materials selections

    Get PDF
    Advanced space power systems that use solar energy and Brayton or Stirling heat engines require thermal energy storage (TES) systems to operate continuously through periods of shade. The receiver storage units, key elements in both Brayton and Stirling systems, are designed to use the latent heat of fusion of phase-change materials (PCMs). The power systems under current consideration for near-future National Aeronautics and Space Administration space missions require working fluid temperatures in the 1100 to 1400 K range. The PCMs under current investigation that gave liquid temperatures within this range are the fluoride family of salts. However, these salts have low thermal conductivity, which causes large temperature gradients in the storage systems. Improvements can be obtained, however, with the use of thermal conductivity enhancements or metallic PCMs. In fact, if suitable containment materials can be found, the use of metallic PCMs would virtually eliminate the orbit associated temperature variations in TES systems. The high thermal conductivity and generally low volume change on melting of germanium and alloys based on silicon make them attractive for storage of thermal energy in space power systems. An approach to solving the containment problem, involving both chemical and physical compatibility, preparation of NiSi/NiSi2, and initial results for containment of germanium and NiSi/NiSi2, are presented

    Fall back accretion and energy injections in gamma-ray bursts

    Full text link
    Intense flares that occur at late times relative to the prompt phase have been observed by the SwiftSwift satellite in the X-ray afterglows of gamma-ray bursts (GRBs). Here, we present a detailed analysis on the fall back accretion process to explain the intense flare phase in the very early X-ray afterglow light curves. To reproduce the afterglow at late times, we resort to the external shock by engaging energy injections. By applying our model to GRBs 080810, 081028 and 091029, we show that their X-ray afterglow light curves can be reproduced well. We then apply our model to the ultra-long SwiftSwift GRB 111209A, which is the longest burst ever observed. The very early X-ray afterglow of GRB 111209A showed many interesting features, such as a significant bump observed at around 2000 s after the SwiftSwift/BAT trigger. We assume two constant energy injection processes in our model. These can explain the observed plateau at X-ray wavelength in the relatively early stage (8.0×1038.0\times10^{3} s) and a second X-ray plateau and optical rebrightening at about 10510^{5} s. Our analysis supports the scenario that a significant amount of material may fall back toward the central engine after the prompt phase, causing an enhanced and long lived mass accretion rate powering a Poynting-flux-dominated outflow.Comment: 2 tables, 3 figures, accepted by MNRA

    Pair distribution function and structure factor of spherical particles

    Full text link
    The availability of neutron spallation-source instruments that provide total scattering powder diffraction has led to an increased application of real-space structure analysis using the pair distribution function. Currently, the analytical treatment of finite size effects within pair distribution refinement procedures is limited. To that end, an envelope function is derived which transforms the pair distribution function of an infinite solid into that of a spherical particle with the same crystal structure. Distributions of particle sizes are then considered, and the associated envelope function is used to predict the particle size distribution of an experimental sample of gold nanoparticles from its pair distribution function alone. Finally, complementing the wealth of existing diffraction analysis, the peak broadening for the structure factor of spherical particles, expressed as a convolution derived from the envelope functions, is calculated exactly for all particle size distributions considered, and peak maxima, offsets, and asymmetries are discussed.Comment: 7 pages, 6 figure

    Stresses in isostatic granular systems and emergence of force chains

    Full text link
    Progress is reported on several questions that bedevil understanding of granular systems: (i) are the stress equations elliptic, parabolic or hyperbolic? (ii) how can the often-observed force chains be predicted from a first-principles continuous theory? (iii) How to relate insight from isostatic systems to general packings? Explicit equations are derived for the stress components in two dimensions including the dependence on the local structure. The equations are shown to be hyperbolic and their general solutions, as well as the Green function, are found. It is shown that the solutions give rise to force chains and the explicit dependence of the force chains trajectories and magnitudes on the local geometry is predicted. Direct experimental tests of the predictions are proposed. Finally, a framework is proposed to relate the analysis to non-isostatic and more realistic granular assemblies.Comment: 4 pages, 2 figures, Corrected typos and clkearer text, submitted to Phys. Rev. Let

    Optically excited states in positronium

    Get PDF
    Optical excitation are reported of the 1 3S-2 3P transition in positronium, and a second excitation from n=2 to higher n states. The experiment used light from two pulsed dye lasers. Changes in the positronium annihilation rate during and after the laser pulse were used to deduce the excited state populations. The n=2 level was found to be saturable and excitable to a substantial fraction of n=2 positronium to higher levels. Preliminary spectroscopic measurements were performed on n=14 and n=15 positronium

    Neoadjuvant chemotherapy and trastuzumab versus neoadjuvant chemotherapy followed by post-operative trastuzumab for patients with HER2-positive breast cancer

    Get PDF
    Neoadjuvant chemotherapy plus trastuzumab (NCT) increases the rate of pathological complete response (pCR) and event-free survival (EFS) compared to neoadjuvant chemotherapy (NC) alone in women with HER2 positive breast cancer (BC). pCR in this setting is associated with improved EFS. Whether NCT preferentially improves EFS in comparison to NC followed by adjuvant trastuzumab initiated postoperatively (NCAT) has not been addressed. Using clinical data from women with HER2 positive BC treated at 7 European institutions between 2007 and 2010 we sought to investigate the impact on breast cancer outcomes of concomitant (NCT) versus sequential (NCAT) treatment in HER2 positive early BC. The unadjusted hazard ratio (HR) for event free survival with NCT compared with NCAT was 0.63 (95% CI 0.37–1.08; p = 0.091). Multivariable analysis revealed that treatment group, tumour size and ER status were significantly associated with EFS from diagnosis. In the whole group NCT was associated with a reduced risk of an event relative to NCAT, an effect that was confined to ER negative (HR: 0.25; 95% CI, 0.10–0.62; p = 0.003) as opposed to ER positive tumours (HR: 1.07; 95% CI, 0.46–2.52; p = 0.869). HER2 positive/ER negative BC treated with NC gain greatest survival benefit when trastuzumab is administered in both the neoadjuvant and adjuvant period rather than in the adjuvant period alone. These data support the early introduction of targeted combination therapy in HER2 positive/ER negative BC

    Average stresses and force fluctuations in non-cohesive granular materials

    Full text link
    A lattice model is presented for investigating the fluctuations in static granular materials under gravitationally induced stress. The model is similar in spirit to the scalar q-model of Coppersmith et al., but ensures balance of all components of forces and torques at each site. The geometric randomness in real granular materials is modeled by choosing random variables at each site, consistent with the assumption of cohesionless grains. Configurations of the model can be generated rapidly, allowing the statistical study of relatively large systems. For a 2D system with rough walls, the model generates configurations consistent with continuum theories for the average stresses (unlike the q-model) without requiring the assumption of a constitutive relation. For a 2D system with periodic boundary conditions, the model generates single-grain force distributions similar to those obtained from the q-model with a singular distribution of q's.Comment: 18 pages, 10 figures. Uses aps,epsfig,graphicx,floats,revte

    Logarithmic rate dependence in deforming granular materials

    Full text link
    Rate-independence for stresses within a granular material is a basic tenet of many models for slow dense granular flows. By contrast, logarithmic rate dependence of stresses is found in solid-on-solid friction, in geological settings, and elsewhere. In this work, we show that logarithmic rate-dependence occurs in granular materials for plastic (irreversible) deformations that occur during shearing but not for elastic (reversible) deformations, such as those that occur under moderate repetitive compression. Increasing the shearing rate, \Omega, leads to an increase in the stress and the stress fluctuations that at least qualitatively resemble what occurs due to an increase in the density. Increases in \Omega also lead to qualitative changes in the distributions of stress build-up and relaxation events. If shearing is stopped at t=0, stress relaxations occur with \sigma(t)/ \sigma(t=0) \simeq A \log(t/t_0). This collective relaxation of the stress network over logarithmically long times provides a mechanism for rate-dependent strengthening.Comment: 4 pages, 5 figures. RevTeX

    Things change: Women’s and men’s marital disruption dynamics in Italy during a time of social transformations, 1970-2003

    Get PDF
    We study women’s and men’s marital disruption in Italy between 1970 and 2003. By applying an event-history analysis to the 2003 Italian variant of the Generations and Gender Survey we found that the spread of marital disruption started among middle-highly educated women. Then in recent years it appears that less educated women have also been able to dissolve their unhappy unions. Overall we can see the beginning of a reversed educational gradient from positive to negative. In contrast the trend in men’s marital disruption risk appears as a change over time common to all educational groups, although with persisting educational differentials.determinants, educational differences, event history analysis, gender difference, Italy, marital disruption

    Observations of heterogeneous reactions between Asian pollution and mineral dust over the Eastern North Pacific during INTEX-B

    Get PDF
    In-situ airborne measurements of trace gases, aerosol size distributions, chemistry and optical properties were conducted over Mexico and the Eastern North Pacific during MILAGRO and INTEX-B. Heterogeneous reactions between secondary aerosol precursor gases and mineral dust lead to sequestration of sulfur, nitrogen and chlorine in the supermicrometer particulate size range. Simultaneous measurements of aerosol size distributions and weak-acid soluble calcium result in an estimate of 11 wt% of CaCO_3 for Asian dust. During transport across the North Pacific, ~5–30% of the CaCO_3 is converted to CaSO_4 or Ca(NO_3)_2 with an additional ~4% consumed through reactions with HCl. The 1996 to 2008 record from the Mauna Loa Observatory confirm these findings, indicating that, on average, 19% of the CaCO_3 has reacted to form CaSO_4 and 7% has reacted to form Ca(NO_3)_2 and ~2% has reacted with HCl. In the nitrogen-oxide rich boundary layer near Mexico City up to 30% of the CaCO_3 has reacted to form Ca(NO_3)_2 while an additional 8% has reacted with HCl. These heterogeneous reactions can result in a ~3% increase in dust solubility which has an insignificant effect on their optical properties compared to their variability in-situ. However, competition between supermicrometer dust and submicrometer primary aerosol for condensing secondary aerosol species led to a 25% smaller number median diameter for the accumulation mode aerosol. A 10–25% reduction of accumulation mode number median diameter results in a 30–70% reduction in submicrometer light scattering at relative humidities in the 80–95% range. At 80% RH submicrometer light scattering is only reduced ~3% due to a higher mass fraction of hydrophobic refractory components in the dust-affected accumulation mode aerosol. Thus reducing the geometric mean diameter of the submicrometer aerosol has a much larger effect on aerosol optical properties than changes to the hygroscopic:hydrophobic mass fractions of the accumulation mode aerosol. In the presence of dust, nitric acid concentrations are reduced to 85% to 60–80% in the presence of dust. These observations support previous model studies which predict irreversible sequestration of reactive nitrogen species through heterogeneous reactions with mineral dust during long-range transport
    corecore