Accumulation of Polychlorinated Biphenyls in Adipocytes: Selective Targeting to Lipid Droplets and Role of Caveolin-1

Background : Polychlorinated biphenyls (PCBs) are persistent environmental pollutants that preferentially accumulate in lipid-rich tissues of contaminated organisms. Although the adipose tissue constitutes a major intern reservoir of PCBs and recent epidemiological studies associate PCBs to the development of obesity and its related disorders, little is known about the mechanisms involved in their uptake by the adipose tissue and their intracellular localization in fat cells

Comprehensive molecular and morphological resolution of blubber stratification in a deep-diving, fasting-adapted seal

Blubber is a modified subcutaneous adipose tissue in marine mammals that provides energy storage, thermoregulation, hydrodynamic locomotion, and buoyancy. Blubber displays vertical stratification by lipid content, fatty acid composition, and vascularization, leading to the assumption that deeper blubber layers are metabolically active, while superficial layers are mainly structural and thermoregulatory. However, few studies have examined functional stratification of marine mammal blubber directly, especially in pinnipeds. We characterized morphological and transcriptional differences across blubber layers in the northern elephant seal, a deep-diving and fasting-adapted phocid. We collected blubber from seals early in their fasting period and divided blubber cores into three similarly sized portions. We hypothesized that the innermost blubber portion would have higher 1) heterogeneity in adipocyte size, 2) microvascular density, and 3) expression of genes associated with metabolism and hormone signaling than outer blubber. We found that adipocyte area and variance increased from outermost (skin-adjacent) to innermost (muscle-adjacent) blubber layers, suggesting that inner blubber has a higher capacity for lipid storage and turnover than outer blubber. Inner blubber had a higher proportion of CD144+ endothelial cells, suggesting higher microvascular density. In contrast, outer blubber had a higher proportion of CD4+ immune cells than inner blubber, suggesting higher capacity for response to tissue injury. Transcriptome analysis identified 61 genes that were differentially expressed between inner and outer blubber layers, many of which have not been studied previously in marine mammals. Based on known functions of these genes in other mammals, we suggest that inner blubber has potentially higher 1) adipogenic capacity, 2) cellular diversity, and 3) metabolic and neuroendocrine signaling activity, while outer blubber may have higher 1) extracellular matrix synthesis activity and 2) responsiveness to pathogens and cell stressors. We further characterized expression of nine genes of interest identified by transcriptomics and two adipokines with higher precision across blubber layers using targeted assays. Our study provides functional insights into stratification of blubber in marine mammals and a molecular key, including CD144, CD4, HMGCS2, GABRG2, HCAR2, and COL1A2, for distinguishing blubber layers for physiological and functional studies in seals

Conversion of t11t13 CLA into c9t11 CLA in Caco-2 Cells and Inhibition by Sterculic Oil

Background : Conjugated linoleic acids (CLA), and principally c9t11 CLA, are suspected to have numerous preventive properties regarding non-infectious pathologies such as inflammatory diseases, atherosclerosis and several types of cancer. C9t11 CLA is produced in the rumen during biohydrogenation of linoleic acid, but can also be synthesized in mammalian tissues from trans-vaccenic acid (C18:1 t11) through the action of delta-9 desaturase (D9D). For several years, it is also known that c9t11 CLA can be synthesized from conjugated linolenic acids (CLnA), i.e. c9t11c13 CLnA and c9t11t13 CLnA. This study aimed at investigating to which extent and by which route c9t11 CLA can be produced from another isomer of CLA, the t11t13 CLA that is structurally very similar to c9t11t13 CLnA, in Caco-2 cells

Identification of Metabolites in the Normal Ovary and Their Transformation in Primary and Metastatic Ovarian Cancer

In this study, we characterized the metabolome of the human ovary and identified metabolic alternations that coincide with primary epithelial ovarian cancer (EOC) and metastatic tumors resulting from primary ovarian cancer (MOC) using three analytical platforms: gas chromatography mass spectrometry (GC/MS) and liquid chromatography tandem mass spectrometry (LC/MS/MS) using buffer systems and instrument settings to catalog positive or negative ions. The human ovarian metabolome was found to contain 364 biochemicals and upon transformation of the ovary caused changes in energy utilization, altering metabolites associated with glycolysis and β-oxidation of fatty acids—such as carnitine (1.79 fold in EOC, p<0.001; 1.88 fold in MOC, p<0.001), acetylcarnitine (1.75 fold in EOC, p<0.001; 2.39 fold in MOC, p<0.001), and butyrylcarnitine (3.62 fold, p<0.0094 in EOC; 7.88 fold, p<0.001 in MOC). There were also significant changes in phenylalanine catabolism marked by increases in phenylpyruvate (4.21 fold; p = 0.0098) and phenyllactate (195.45 fold; p<0.0023) in EOC. Ovarian cancer also displayed an enhanced oxidative stress response as indicated by increases in 2-aminobutyrate in EOC (1.46 fold, p = 0.0316) and in MOC (2.25 fold, p<0.001) and several isoforms of tocopherols. We have also identified novel metabolites in the ovary, specifically N-acetylasparate and N-acetyl-aspartyl-glutamate, whose role in ovarian physiology has yet to be determined. These data enhance our understanding of the diverse biochemistry of the human ovary and demonstrate metabolic alterations upon transformation. Furthermore, metabolites with significant changes between groups provide insight into biochemical consequences of transformation and are candidate biomarkers of ovarian oncogenesis. Validation studies are warranted to determine whether these compounds have clinical utility in the diagnosis or clinical management of ovarian cancer patients

Sometimes Sperm Whales (Physeter macrocephalus) Cannot Find Their Way Back to the High Seas: A Multidisciplinary Study on a Mass Stranding

BACKGROUND: Mass strandings of sperm whales (Physeter macrocephalus) remain peculiar and rather unexplained events, which rarely occur in the Mediterranean Sea. Solar cycles and related changes in the geomagnetic field, variations in water temperature and weather conditions, coast geographical features and human activities have been proposed as possible causes. In December 2009, a pod of seven male sperm whales stranded along the Adriatic coast of Southern Italy. This is the sixth instance from 1555 in this basin. METHODOLOGY/PRINCIPAL FINDINGS: Complete necropsies were performed on three whales whose bodies were in good condition, carrying out on sampled tissues histopathology, virology, bacteriology, parasitology, and screening of veins looking for gas emboli. Furthermore, samples for age determination, genetic studies, gastric content evaluation, stable isotopes and toxicology were taken from all the seven specimens. The animals were part of the same group and determined by genetic and photo-identification to be part of the Mediterranean population. Causes of death did not include biological agents, or the "gas and fat embolic syndrome", associated with direct sonar exposure. Environmental pollutant tissue concentrations were relatively high, in particular organochlorinated xenobiotics. Gastric content and morphologic tissue examinations showed a prolonged starvation, which likely caused, at its turn, the mobilization of lipophilic contaminants from the adipose tissue. Chemical compounds subsequently entered the blood circulation and may have impaired immune and nervous functions. CONCLUSIONS/SIGNIFICANCE: A multi-factorial cause underlying this sperm whales' mass stranding is proposed herein based upon the results of postmortem investigations as well as of the detailed analyses of the geographical and historical background. The seven sperm whales took the same "wrong way" into the Adriatic Sea, a potentially dangerous trap for Mediterranean sperm whales. Seismic surveys should be also regarded as potential co-factors, even if no evidence of direct impact has been detected

Blends of Bisphenol a Polycarbonate and Acrylic Polymers .1. a Chemical-reaction Mechanism

The chemical reaction at high temperature (above 200 degrees C) between PC and PMMA has been very recently highlighted. However, no clear reaction mechanism has been proposed to explain this phenomenon. We suggest a reaction mechanism following two steps. The first step consists of hydrolysis of the ester bonds of the PMMA leading to acid pendant groups. These acids can then either ring close into glutaric anhydride, or acidolyze the carbonate bonds of PC during the second step. At the same time, benzoic acid produced by PC degradation could further react with PMMA or acidolyze the carbonate groups leading to the crosslinking of the system. A satisfactory contact between the reacting units is a key point in the process. Significant amounts of PC-PMMA copolymer are obtained when the reaction is performed from a miscible system. On the contrary, no reaction occurs during melt mixing. Understanding the process enables us to specify the conditions, in which no chemical reaction takes place. In nonreactive conditions, PC/PMMA blends remain immiscible for several hours at 300 degrees C. The thermodynamic UCST proposed in the literature is just an artifact due to the occurrence of the chemical reaction. (C) 1995 John Wiley and Sons, Inc

Blends of bisphenol-A polycarbonate and acrylic polymers .3. Effect of imide concentration on compatibility

Imide units copolymerized with MMA units have been selected in order to improve compatibility between PC and acrylics through specific interaction or internal repulsion. Good dispersion of acrylic inside a PC matrix has been observed upon melt mixing, which can be partially explained by the good rheological agreement between these two polymers. Transmission electron microscopy has shown that the system remains phase separated from 5 to 95 wt % of PC. Phase diagrams for three different imide concentrations have been drawn. Results obtained by DSC (conventional and with enthalpy relaxation) are similar to those obtained by optical cloud point detection. The phase diagrams show the raise of the PC/PMMA demixtion curve (LCST type) when percentage of imide increases in the acrylic phase. Theoretical calculations on binary interaction energy density show a slight improvement of the interaction between acrylic and PC when imide percentage increases. Cloud point measurements on 50/50 PC/acrylic blends varying the imide concentration show that the improvement of compatibility deduced from the raise of the demixtion curve ( LCST type) is more related to a kinetic effect (the high T-g of imidized samples is reducing macromolecule mobility) than specific interactions. The calculated favorable interactions are probably too weak to be detected with cloud point measurements. The microstructures obtained after crystallization of the PC phase under solvent vapors is phase separated PC/acrylics blends can also be explained by T-g effects. Moreover, solvent vapor exposure could be a powerful tool to determine the real thermodynamic behavior of the blends at room temperature. (C) 1997 John Wiley & Sons, Inc

Blends of polycarbonate and acrylic polymers: Crystallization of polycarbonate

The microstructure of amorphous polymer blends has been extensively studied in the past, but now there is a growing interest for polymer blends where one or more of the components can crystallize. In this study we investigate such blends, namely miscible polycarbonate (PC)/acrylic blends. Using small angle X-ray scattering (SAXS) measurements, combined with atomic force microscopy (AFM), electron microscopy (SEM), and optical microscopy, we demonstrate that the amorphous acrylic component mostly segregates inside the spherulites between the lamellar bundles (interfibrillar segregation). Varying the PC molecular weight or the mobility of the amorphous component (by changing its molecular weight and T-g) does not change the mode of segregation. So far qualitative predictions of the mode of segregation in semicrystalline polymer blends have been proposed using the delta parameter (the ratio between the diffusion coefficient D of the amorphous component in the blend and the linear crystallization rate G), introduced by Keith and Padden. Our results suggest that other parameters have to be considered to fully understand the segregation process. (C) 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2197-2210, 1998

Blends of bisphenol-A polycarbonate and acrylic polymers .2. PC/acrylic copolymers as a new route for compatibilization

An acrylic polymer containing acid and anhydride units, referred to as reactive polyglutarimide (RPGI), has been used to react with PC. The reaction has been previously determined as an acidolysis of the carbonate bond which breaks the PC chain in two parts. One of those two parts remains free while the other one is grafted on the acrylic backbone. We have found that the anhydride units could also react with the carbonate bonds. In this case the PC macromolecule would also be broken in two parts, which would, however, both be grafted on the acrylic backbone. The reaction has been performed in solution in order to keep good contact between the reacting units. The influence of temperature and concentration on the grafting ratio has been studied. The best experimental conditions were determined in order to obtain a grafted copolymer where the acrylic backbone only supports, on the average, one PC side chain through acid reaction or two PC chains through anhydride reaction. Indeed, these two types of reactions could not be isolated. The efficiency of this copolymer as emulsifier has been studied in solution cast blends as well as in melt mixed blends. The copolymer strongly affects the microstructure in solution cast blends where films containing 30 wt % of PC have become transparent. However, the dispersed phase size of solvent cast blends could be highly influenced by the casting conditions related to solvent trapping. In melt mixed samples, the copolymer also reduces significantly the dispersed phase size, but no transparent blends have been observed so far. These results were compared with those given in the literature describing the efficiency of a synthesized copolymer which has a more complicated structure. (C) 1997 John Wiley & Sons, Inc

Interfollicular fibrosis in the thyroid of the harbour porpoise: An endocrine disruption?

Previous studies have described high levels of polychlorobiphenyls (PCB), polybrominated diphenylether (PBDE), toxaphene, ,p0-dichlorodiphenyltrichloroethane (DDT), and ,p0-dichlorodiphenyldichloroethylene (DDE) in the blubber of the harbour porpoise from the North Sea raising the question of a potential endocrine disruption in this species. In the present study, the thyroids of 57 harbour porpoises from the German and Danish (North and Baltic Seas), Norwegian, and Icelandic coasts have been collected for histological and immunohistological investigations. The number of follicles and the relative distribution of follicles, connective, and solid tissues (%) were quantified in the thyroid of each individual. Then, the potential relationship between the thyroid morphometry data and previously described organic compounds (namely, PCB, PBDE, toxaphene, DDT, and DDE) was investigated using factor analysis and multiple regressions. Thyroid morphology differed strongly between ampling sites. Porpoises from the German (North and Baltic Seas) and Norwegian coasts displayed a high percentage of connective tissues between 30 and 38% revealing severe interfollicular fibrosis and a high number of large follicles (diameter >200 lm). A correlation-based principal component analysis (PCA) revealed two principal components explaining 85.9% of the total variance. The variables PCB, PBDE, DDT, and DDE compounds loaded highest on PC1 whereas toxaphene compound loaded most on PC2. Our results pointed out a relationship between PC1 (PCBs, PBDE, DDE, and DDT compounds) and interfollicular fibrosis in the harbour porpoise thyroids. Such an association is not alone sufficient for a cause–effect relationship but supports the hypothesis of a contaminant-induced thyroid fibrosis in harbour porpoises raising the question of the longterm viability in highly polluted areas