4,673 research outputs found
measurement of the enhancement of the nuclear interaction yield with crystalline targets at cyclotron energies
Ordered structures such as crystalline materials may help to enhance the nuclear interaction yield. Indeed, the aligned atoms act as a single entity on impinging charged particles, causing the trajectory to pass from its random motion to a deterministic one. In fact, Monte Carlo simulations suggested that specific crystal alignments allow for the enhancement of the production rate of nuclear inelastic reactions, because particles are forced to pass by the atomic nuclei more frequently than would happen in an amorphous material. Recent measurements we carried out at the AN2000 accelerator of the National Institute for Nuclear Physics Legnaro National Laboratories showed the experimental evidence of such an effect. A 643.5 keV collimated proton beam was used to induce the [Formula: see text]O(p,[Formula: see text]N reaction in an Al[Formula: see text]O[Formula: see text] substrate oriented along the axis. The capability of manipulating such an effect paves the way to studying innovative targets for the enhancement of the nuclear interaction yield with a constant density
Low temperature deactivation of Ge heavily n-type doped by ion implantation and laser thermal annealing
International audienceHeavy doping of Ge is crucial for several advanced micro-and optoelectronic applications, but, at the same time, it still remains extremely challenging. Ge heavily n-type doped at a concentration of 1 X 10(20) cm(-3) by As ion implantation and melting laser thermal annealing (LTA) is shown here to be highly metastable. Upon post-LTA conventional thermal annealing As electrically deactivates already at 350 degrees C reaching an active concentration of similar to 4 x 10(19) cm(-3). No significant As diffusion is detected up to 450 degrees C, where the As activation decreases further to similar to 3 x 10(19) cm(-3). The reason for the observed detrimental deactivation was investigated by Atom Probe Tomography and in situ High Resolution X-Ray Diffraction measurements. In general, the thermal stability of heavily doped Ge layers needs to be carefully evaluated because, as shown here, deactivation might occur at very low temperatures, close to those required for low resistivity Ohmic contacting of n-type Ge
Experimental evidence of planar channeling in a periodically bent crystal
The usage of a Crystalline Undulator (CU) has been identified as a promising
solution for generating powerful and monochromatic -rays. A CU was
fabricated at SSL through the grooving method, i.e., by the manufacturing of a
series of periodical grooves on the major surfaces of a crystal. The CU was
extensively characterized both morphologically via optical interferometry at
SSL and structurally via X-ray diffraction at ESRF. Then, it was finally tested
for channeling with a 400 GeV/c proton beam at CERN. The experimental results
were compared to Monte Carlo simulations. Evidence of planar channeling in the
CU was firmly observed. Finally, the emission spectrum of the positron beam
interacting with the CU was simulated for possible usage in currently existing
facilities
Yield, water use efficiency, and yield response factor in carrot crop under different irrigation depths
The aim of the present study was to evaluate the effect of different irrigation depths on the yield, water use efficiency (WUE), and yield response factor (Ky) of carrot (cv. 'BrasĂlia') in the edaphoclimatic conditions of Baixada Fluminense, RJ, Brazil. Field trials were conducted in a Red-Yellow Argisol in the 2010-2011period. A randomized block design was used, with 5 treatments (depths) and 4 replicates. Depths were applied by drippers with different flow rates, and the irrigation was managed by time domain reflectometry (TDR) technique. The reference (ETo) and crop (ETc) evapotranspiration depths reached 286.3 and 264.1mm in 2010, and 336.0 and 329.9mm in 2011, respectively. The root yield varied from 30.4 to 68.9t ha-1 as a response to treatments without irrigation and 100% replacement of the soil water depth, respectively. Values for WUE in the carrot crop varied from 15 to 31kg m-3 and the mean Ky value was 0.82. The mean values for Kc were obtained in the initial (0.76), intermediate (1.02), and final (0.96) stages. Carrot crop was influenced by different water depths (treatments) applied, and the highest value for WUE was obtained for 63.4% of soil water replacement.Publicada online Online em 5 de abril de 2016
Analysis of the combined effect of hydrogrinding process and inclination angle on hydraulic performance of diesel injection nozzles
A computational study to investigate the influence of the orifices inclination and the rounding radius at the orifice inlet (consequence of the hydro-erosive grinding process applied after the orifices machining) over the internal nozzle flow is performed in this paper. The study starts with the analysis of experimental results where the mass flow and momentum flux of two nozzles with very different values of these two variables are compared. This analysis shows relatively small differences in terms of mass flow and momentum flux, since the higher losses associated to the higher deflection of the streamlines with a higher inclination of the orifices are counteracted by the higher rounding radius, which favors the flow entrance to the orifice.
To explain this experimental outcome, an extensive computational study involving nine geometries that combine different inclination angles and rounding radius is conducted, in order to quantify the influence of both parameters on the flow separately, as well as to assess the potential of their combination. These geometries are compared in terms of discharge coefficient, critical cavitation conditions and effective injection velocity, among others. Results show differences up to 15% in terms of mass flow rate and 8% for the effective injection velocity among the two extreme cases (lowest inclination and highest hydro-erosion level versus the nozzle with the highest inclination and lowest hydro-erosion level). Given the importance of these phenomena on the subsequent mixing and combustion processes, the results hereby presented are of interest for Diesel engines injectors and combustion chambers designers.This work was partly sponsored by "Ministerio de Economia y Competitividad" in the frame of the project "Comprension de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo diesel", Reference TRA2012-36932. The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)", in the frame of the operation program of unique scientific and technical infrastructure of the Ministry of Science and Innovation of Spain. This support is gratefully acknowledged by the authors.Salvador Rubio, FJ.; Carreres Talens, M.; Jaramillo CĂscar, D.; MartĂnez LĂłpez, J. (2015). Analysis of the combined effect of hydrogrinding process and inclination angle on hydraulic performance of diesel injection nozzles. Energy Conversion and Management. 105:1352-1365. https://doi.org/10.1016/j.enconman.2015.08.035S1352136510
Steering efficiency of a ultrarelativistic proton beam in a thin bent crystal
Crystals with small thickness along the beam exhibit top performance for steering particle beams through planar channeling. For such crystals, the effect of nuclear dechanneling plays an important role because it affects their efficiency. We addressed the problem through experimental work carried out with 400 GeV/c protons at fixed-target facilities of CERN-SPS. The dependence of efficiency vs. curvature radius has been investigated and compared favourably to the results of modeling. A realistic estimate of the performance of a crystal designed for LHC energy including nuclear dechanneling has been achieved
Ăštiles mineros en la prehistoria del S.E de Extremadura. Análisis petrolĂłgico y geoquĂmico y determinaciĂłn de las áreas fuente en la materias primas
Development of the Coordination Dimension of Relational Capabilities: Comparison between For- Profit and Non-profit Technology Transfer Partnerships
In order to ensure the success of a technology transfer partnership for-profit or non-profit, it is necessary to understand which relational capabilities (RC) to explore. This article analyses which factors can assist in the development of the coordination dimension of RC, in cooperation with the development of non-profit and profit-oriented technologies, highlighting their similarities and differences. The method used was multi-case qualitative research, studying two groups (group N and group P), each with 5 entities. The main differences highlighted is the increase of social credibility for the group N and the knowledge dissemination of the partners and the processes improvement for the group P. Within this research, it was possible to deepen the model of Alves (2015), regarding the inclusion of factors that can help the development of RC Management dimensions. Understanding capabilities development in each alliance is the implication of the study
Eventual Consistency: Origin and Support
Eventual consistency is demanded nowadays in geo-replicated services that need to be highly scalable and available. According to the CAP constraints, when network partitions may arise, a distributed service should choose between being strongly consistent or being highly available. Since scalable services should be available, a relaxed consistency (while the network is partitioned) is the preferred choice. Eventual consistency is not a common data-centric consistency model, but only a state convergence condition to be added to a relaxed consistency model. There are still several aspects of eventual consistency that have not been analysed in depth in previous works: 1. which are the oldest replication proposals providing eventual consistency, 2. which replica consistency models provide the best basis for building eventually consistent services, 3. which mechanisms should be considered for implementing an eventually consistent service, and 4. which are the best combinations of those mechanisms for achieving different concrete goals. This paper provides some notes on these important topics
Enhancement of the Inelastic Nuclear Interaction Rate in Crystals via Antichanneling
The interaction rate of a charged particle beam with the atomic nuclei of a target varies significantly if the target has a crystalline structure. In particular, under specific orientations of the target with respect to the incident beam, the probability of inelastic interaction with nuclei can be enhanced with respect to the unaligned case. This effect, which can be named antichanneling, can be advantageously used in the cases where the interaction between beam and target has to be maximized. Here we propose to use antichanneling to increase the radioisotope production yield via cyclotron. A dedicated set of experimental measurements was carried out at the INFN Legnaro Laboratories with the AN2000 and CN accelerators to prove the existence of the antichanneling effect. The variation of the interaction yield at hundreds of keV to MeV energies was observed by means of sapphire and indium phosphide crystals, achieving an enhancement of the interaction rate up to 73% and 25%, respectively. Such a result may pave the way to the development of a novel type of nozzle for the existing cyclotrons, which can exploit crystalline materials as targets for radioisotope production, especially to enhance the production rate for expensive prime materials with minor upgrades of the current instrumentation
- …