2,127 research outputs found

    On the nature of long-range contributions to pair interactions between charged colloids in two dimensions

    Full text link
    We perform a detailed analysis of solutions of the inverse problem applied to experimentally measured two-dimensional radial distribution functions for highly charged latex dispersions. The experiments are carried out at high colloidal densities and under low-salt conditions. At the highest studied densities, the extracted effective pair potentials contain long-range attractive part. At the same time, we find that for the best distribution functions available the range of stability of the solutions is limited by the nearest neighbour distance between the colloidal particles. Moreover, the measured pair distribution functions can be explained by purely repulsive pair potentials contained in the stable part of the solution.Comment: 6 pages, 5 figure

    Capillary Condensation and Interface Structure of a Model Colloid-Polymer Mixture in a Porous Medium

    Full text link
    We consider the Asakura-Oosawa model of hard sphere colloids and ideal polymers in contact with a porous matrix modeled by immobilized configurations of hard spheres. For this ternary mixture a fundamental measure density functional theory is employed, where the matrix particles are quenched and the colloids and polymers are annealed, i.e. allowed to equilibrate. We study capillary condensation of the mixture in a tiny sample of matrix as well as demixing and the fluid-fluid interface inside a bulk matrix. Density profiles normal to the interface and surface tensions are calculated and compared to the case without matrix. Two kinds of matrices are considered: (i) colloid-sized matrix particles at low packing fractions and (ii) large matrix particles at high packing fractions. These two cases show fundamentally different behavior and should both be experimentally realizable. Furthermore, we argue that capillary condensation of a colloidal suspension could be experimentally accessible. We find that in case (ii), even at high packing fractions, the main effect of the matrix is to exclude volume and, to high accuracy, the results can be mapped onto those of the same system without matrix via a simple rescaling.Comment: 12 pages, 9 figures, submitted to PR

    Mix and measure II: joint high-energy laboratory powder diffraction and microtomography for cement hydration studies

    Get PDF
    Portland cements (PCs) and cement blends are multiphase materials of different fineness, and quantitatively analysing their hydration pathways is very chal- lenging. The dissolution (hydration) of the initial crystalline and amorphous phases must be determined, as well as the formation of labile (such as ettringite), reactive (such as portlandite) and amorphous (such as calcium silicate hydrate gel) components. The microstructural changes with hydration time must also be mapped out. To address this robustly and accurately, an innovative approach is being developed based on in situ measurements of pastes without any sample conditioning. Data are sequentially acquired by Mo K�1 laboratory X-ray powder diffraction (LXRPD) and microtomography (mCT), where the same volume is scanned with time to reduce variability. Wide capillaries (2 mm in diameter) are key to avoid artefacts, e.g. self-desiccation, and to have excellent particle averaging. This methodology is tested in three cement paste samples: (i) a commercial PC 52.5 R, (ii) a blend of 80 wt% of this PC and 20 wt% quartz, to simulate an addition of supplementary cementitious materials, and (iii) a blend of 80 wt% PC and 20 wt% limestone, to simulate a limestone Portland cement. LXRPD data are acquired at 3 h and 1, 3, 7 and 28 days, and mCT data are collected at 12 h and 1, 3, 7 and 28 days. Later age data can also be easily acquired. In this methodology, the amounts of the crystalline phases are directly obtained from Rietveld analysis and the amorphous phase contents are obtained from mass-balance calculations. From the mCT study, and within the attained spatial resolution, three components (porosity, hydrated products and unhy- drated cement particles) are determined. The analyses quantitatively demon- strate the filler effect of quartz and limestone in the hydration of alite and the calcium aluminate phases. Further hydration details are discussed.Funding for open access charge: Universidad de Málaga / CBUA

    The variable X-ray light curve of GRB 050713A: the case of refreshed shocks

    Full text link
    We present a detailed study of the spectral and temporal properties of the X-ray and optical emission of GRB050713a up to 0.5 day after the main GRB event. The X-ray light curve exhibits large amplitude variations with several rebrightenings superposed on the underlying three-segment broken powerlaw that is often seen in Swift GRBs. Our time-resolved spectral analysis supports the interpretation of a long-lived central engine, with rebrightenings consistent with energy injection in refreshed shocks as slower shells generated in the central engine prompt phase catch up with the afterglow shock at later times. Our sparsely-sampled light curve of the optical afterglow can be fitted with a single power law without large flares. The optical decay index appears flatter than the X-ray one, especially at later times.Comment: few changes, to be published in A&

    In Vitro Evaluation of Essential Oils and Saturated Fatty Acids for Repellency against the Old-World Sand Fly, Phlebotomus papatasi (Scopoli) (Diptera: Psychodidae)

    Get PDF
    The sand fly, Phlebotomus papatasi (Scopoli, 1786), is a major vector for Leishmania major in the Middle East, which has impacted human health and US military operations in the area, demonstrating the need to develop effective sand fly control and repellent options. Here, we report the results of spatial repellency and avoidance experiments in a static air olfactometer using the female P. papatasi testing essential oils of Lippia graveolens (Mexican oregano), Pimenta dioica (allspice), Amyris balsamifera (amyris), Nepeta cataria (catnip), Mentha piperita (peppermint), and Melaleuca alternifolia (tea tree); the 9–12 carbon saturated fatty acids (nonanoic acid, decanoic acid, undecanoic acid, and dodecanoic acid); and the synthetic repellents DEET and IR3535. The materials applied at 1% exhibited varying activity levels but were not significantly different in mean repellency and avoidance from DEET and IR3535, except in regards to nonanoic acid. Some materials, particularly nonanoic and undecanoic acids, produced sand fly mortality. The observed trends in mean repellency over exposure time included the following: (1) P. dioica oil, M. alternifolia oil, decanoic acid, undecanoic acid, DEET, and IR3535 exhibited increasing mean repellency over time; (2) oils of N. cataria, A. balsamifera, M. piperita, and dodecanoic acid exhibited relatively constant mean repellency over time; and (3) L. graveolens oil and nonanoic acid exhibited a general decrease in mean repellent activity over time. These studies identified the essential oils of N. cataria and A. balsamifera as effective spatial repellents at reduced concentrations compared to those of DEET. Additional research is required to elucidate the modes of action and potential synergism of repellents and essential oil components for enhanced repellency activity.This article is published as Temeyer, Kevin B., Kristie G. Schlechte, Joel R. Coats, Charles L. Cantrell, Rodrigo Rosario-Cruz, Kimberly H. Lohmeyer, Adalberto A. Pérez de León, and Andrew Y. Li. 2024. "In Vitro Evaluation of Essential Oils and Saturated Fatty Acids for Repellency against the Old-World Sand Fly, Phlebotomus papatasi (Scopoli) (Diptera: Psychodidae)" Insects 15, no. 3: 155. https://doi.org/10.3390/insects15030155. Works produced by employees of the U.S. Government as part of their official duties are not copyrighted within the U.S. The content of this document is not copyrighted

    A global review of problematic and pathogenic parasites of farmed tilapia

    Get PDF
    Over the past 80 years, tilapia have been translocated globally for aquaculture; active production is recorded in >124 countries. Of 7 million tonnes of tilapia produced in aquaculture, 79% is from 79 countries outside the natural range of tilapia. Capture fisheries account for a further 723,627 tonnes of tilapia, and >47% of this is landed from established invasive populations outside Africa. Tilapias host a rich fauna of parasites, many of which have been translocated with their hosts. This review summarises >2500 host–parasite records from 73+ countries and >820 recorded tilapia translocations (provided in the supplementary materials). This work focuses on the notable pathogens that threaten the health of cultured populations of tilapia, providing a description of their pathology and includes species that also have substantial impacts on wild tilapia populations, where relevant. For each major parasite taxonomic group, we highlight which parasites have been translocated or have been acquired from the new environments into which tilapia have been introduced, together with remarks on standard treatment approaches and research on them and their management and control. Regarding the theme ‘Tilapia health: quo vadis?’, Africa has enormous potential for aquaculture growth, but substantial knowledge gaps about tilapia parasites in many African states remain, which creates associated production and biosecurity risks. For each parasitic group, therefore, the risks of parasite translocation to new regions as tilapia aquaculture industries expand are highlighted

    Evaluación sensorial de ate hecho con pectina de cáscara de naranja

    Get PDF
    Objetivo: El objetivo de este trabajo fue evaluar la calidad sensorial de un ate hecho con pectina de cáscara de naranja comparado con uno elaborado con pectina industrial (control), con la finalidad de dar una alternativa de uso de este biopolímero en un alimento artesanal mexicano. Diseño/metodología/aproximación: Se realizó la extracción de pectina de la cáscara de naranja. Se elaboraron muestras de ate control y otra elaborada con pectina de naranja; se evaluaron características físicas y sensoriales. Resultados: No hubo diferencias en color, ni en la percepción sensorial de sabor, color y textura del ate hecho de pectina de cáscara de naranja y aquel elaborado con pectina industrial. Sin embargo, el ate de pectina de cáscara de naranja mostró mayor adhesividad y fue más frágil que el control. Limitaciones del estudio/implicaciones:  Se requieren más estudios del efecto de adición de la pectina extraída de la cáscara de naranja para mejorar la textura del ate. Hallazgos/conclusiones: Los resultados mostraron que la pectina de cáscara de naranja puede utilizarse en la elaboración del ate

    Infestation of Cattle with the Tick Amblyomma mixtum in the States with the Highest Cattle Inventory in Mexico

    Get PDF
    Background. The Amblyomma mixtum tick is one of the main parasites affecting cattle in Mexico. Epidemiological records of A. mixtum in leading states in the national cattle industry, such as Jalisco, Chiapas, Michoacan, Tabasco and Veracruz, are outdated, since this tick species was previously classified as A. cajennense. Objective. Update the records of the A. mixtum tick in the states of Jalisco, Chiapas, Michoacán, Tabasco, and Veracruz, as well as the main ixodicide molecules used for its control. Methodology. From March 2022 to July 2023, ticks were collected from cattle in 46 bovine production units (UPB) distributed in the states mentioned above. Identification was performed using standardized taxonomic keys. Scanning electron microscopy was performed on specimens corresponding to A. mixtum. Results. Of a total of 619 specimens of the genus Amblyomma from 22 UPB, it was confirmed that 100% correspond to the species A. mixtum. Amitraz, an ixodicide molecule belonging to the chemical class of amidines, was used in 63.2% of the UPBs where the presence of A. mixtum was also reported. Conclusions. This research confirms the infestation of cattle with A. mixtum in states with the highest cattle production in Mexico. Further studies with a focus on resistance and extension are required to prolong the usefulness of available tools, including ixodicides, for integrated control of A. mixtum infestations where this tick infests cattle in Mexico.A Objective: The Amblyomma mixtum tick is one of the main parasites affecting cattle in Mexico. Epidemiological records of A. mixtum in leading states in the national cattle industry, such as Jalisco, Chiapas, Michoacán, Tabasco, and Veracruz, are outdated since this tick species was previously classified as A. cajennense. The objective was to update the records of the A. mixtum tick in the states of Jalisco, Chiapas, Michoacán, Tabasco, and Veracruz, as well as the main ixodicide molecules used for its control. Methodology: From March 2022 to July 2023, ticks were collected from cattle in 46 bovine production units (BPUs) distributed in the states mentioned above. Identification was performed using standardized taxonomic keys. Scanning electron microscopy was performed on specimens corresponding to A. mixtum. Results: Out of a total of 619 specimens of the genus Amblyomma from 22 PBUs, it was confirmed that 100% correspond to the species A. mixtum. Amitraz, an ixodicide molecule belonging to the chemical class of amidines, was used in 63.2% of the BPUs where the presence of A. mixtum was also reported. Conclusions: This research confirms cattle infestation with A. mixtum in states with the highest cattle production in Mexico. Further studies with a focus on resistance and extension are required to prolong the usefulness of available tools, including ixodicides, for integrated control of A. mixtum infestations where this tick infests cattle in Mexico
    corecore