120 research outputs found
Modeling dam break granular flows
River morphodynamics and sediment transportMechanics of sediment transpor
Applicability of Diffusive model for mud-flows: An unsteady analysis
applied to the analysis of debris- and mud- flow dynamics. For this reason, the study of their applicability
conditions represents an important concern. The present work investigates on the applicability conditions of the
Diffusive Wave Model (DWM) for the prediction of mud-flows of shear-thinning fluid represented by a power-law
rheology. The study has been carried out through the numerical solution of the DWM and the Full Wave Model
(FWM) in unsteady conditions with hydrographs of different durations assigned at the channel inlet. The analysis
has considered different rheological indexes, several values of the Froude (F) and of the Kinematic Wave (K)
numbers. Predictions of DWM and FDM have been compared considering the mean value of dimensionless errors
on maximum flow depth,ε∗h, and maximum discharge ε∗q. Positive (negative) error leads to an overestimation
(underestimation) of the maximum flow depth and flow discharge in the prediction of the DWM. In the present
analysis the DWM is considered safely applicable in case of underestimation, i.e. for positive values of ε∗h and ε∗q.
Negative errors are acceptable if their absolute value is smaller than 5%. For all the investigated values of the
governing parameters, the performance of the DWM has been found to strongly depend on the value of the
rheological index, worsening as the fluid rheology becomes more shear-thinning. Regardless of the hydrograph
duration, and for fixed power-law exponent (n) and F values, results indicate the existence of limiting values of
the kinematic wave numberKh and Kq above which the DWM is applicable in terms of maximum depth and
discharge, respectively. For K values smaller than Kh and Kq, the DWM applicability depends also on the
hydrograph duration. In these conditions and for several values of the (F, n) pair, the threshold values of the
hydrograph duration necessary for DWM applicability have been identified. The presented applicability criteria
represent a useful guideline for the practical application of the DWM in assessing the hazard of a mud flood
Impact Force of a Geomorphic Dam-Break Wave against an Obstacle: Effects of Sediment Inertia
The evaluation of the impact force on structures due to a flood wave is of utmost importance for estimating physical damage and designing adequate countermeasures. The present study investigates, using 2D shallow-water approximation, the morphodynamics and forces caused by a dam-break wave against a rigid obstacle in the presence of an erodible bed. A widely used coupled equilibrium model, based on the two-dimensional Saint–Venant hydrodynamic equations combined with the sediment continuity Exner equation (SVEM), is compared with a more complex two-phase model (TPM). Considering an experimental set-up presented in the literature with a single rigid obstacle in a channel, two series of tests were performed, assuming sand or light sediments on the bottom. The former test is representative of a typical laboratory experiment, and the latter may be scaled up to a field case. For each test, two different particle diameters were considered. Independently from the particle size, it was found that in the sand tests, SVEM performs similarly to TPM. In the case of light sediment, larger differences are observed, and the SVEM predicts a higher force of about 26% for both considered diameters. The analysis of the flow fields and the morphodynamics shows these differences can be essentially ascribed to the role of inertia of the solid particles
Greedy algorithms for sensor location in sewer systems
Wastewater quality monitoring is receiving growing interest with the necessity of
developing new strategies for controlling accidental and intentional illicit intrusions. In designing
a monitoring network, a crucial aspect is represented by the sensors’ location. In this study,
a methodology for the optimal placement of wastewater monitoring sensors in sewer systems
is presented. The sensor location is formulated as an optimization problem solved using greedy
algorithms (GRs). The StormWater Management Model (SWMM) was used to perform hydraulic and
water-quality simulations. Six different procedures characterized by different fitness functions
are presented and compared. The performances of the procedures are tested on a real sewer
system, demonstrating the suitability of GRs for the sensor-placement problem. The results show
a robustness of the methodology with respect to the detection concentration parameter, and they
suggest that procedures with multiple objectives into a single fitness function give better results.
A further comparison is performed using previously developed multi-objective procedures with
multiple fitness functions solved using a genetic algorithm (GA), indicating better performances
of the GR. The existing monitoring network, realized without the application of any sensor design,
is always suboptimal
Sewer networks monitoring through a topological backtracking
The interest in wastewater monitoring is always growing, with applications mainly aimed at detection of pollutants and at the environmental epidemiological surveillance. However, it often happens that the strategies
proposed to manage these problems are inapplicable due to the lack of information on the hydraulics of the systems. To overcome this problem, the present paper develops and proposes a topological backtracking strategy
for the optimal monitoring of sewer networks, which acts by subrogating the hydraulic information with the geometric ones, e.g., diameter and slope, thus not requiring any hydraulic simulation. The topological backtracking
approach aims at evaluating an impact coefficient for each node of the network used to face with the problems of sensor location and network coverage for purposes related to the spread of contaminants and pathogens. Finally, the positioning of the sensors for each monitoring scheme is addressed by a priority rank,
based on the efficiency of each sensor in terms of network coverage with respect to a specific weight (e.g., length,
flow). The main goal is to design a monitoring scheme that provide the required coverage of the network by
minimizing the number of sensors with respect to specific measurement threshold value.
The results show the effectiveness of the strategy in supporting the optimal design with the topological-based backtracking approach without the necessity of performing hydraulic simulations, with great advantage in terms
of required data and computational time
two dimensional two phase depth integrated model for transients over mobile bed
AbstractFast geomorphic transients may involve complex scenarios of sediment transport, occurring near the bottom as bed load (i.e., saltating, sliding, and rolling) or as suspended load in the upper portion of the flow. The two sediment transport modalities may even coexist or alternate each other during the same event, especially when the shear stress varies considerably. Modeling these processes is therefore a challenging task, for which the usual representation of the flow as a mixture may result in being unsatisfactory. In the present paper, a new two-phase depth-averaged model is presented that accounts for variable sediment concentration in both bed and suspended loads. Distinct phase velocities are considered for bed load, whereas the slip velocity between the two phases is neglected in the suspended load. It is shown that the resulting two-phase model is hyperbolic, and the analytical expression of the eigenvalues is provided. The entrainment/deposition of sediment between the bottom and the bed ..
Monitoring planning for urban drainage networks
Urban drainage network (UDN) monitoring is an important task whose planning can
be related to various purposes, as for example contaminant detection and epidemiological studies. This paper proposes two different strategies for the identification of a monitoring system for UDNs. The optimal solution, in terms of location and number of sensors, is firstly addressed using a deterministic approach. A new mathematical model is developed and a global optimization solver is employed to perform the optimization procedure. Secondly, the position of devices is also investigated using a new strategy based on the complex network theory (CNT)
tools. The comparison between the results achieved by both the strategies is finally presented with reference to a benchmark network
Effect of the COVID-19 Lockdown on Domestic Water Consumption by Smart Water Network Data Filtering
exploring the use of operational interventions in water distribution systems to reduce the formation of tthms
Abstract Trihalomethanes (TTHMs) are water disinfection by-products whose consumption via drinking water may eventually be harmful for human health, as they could have carcinogenic effects, also for the exposure to them via non-ingestion routes [1] . In the present work the possibility to reduce the vulnerability of the population exposed to TTHMs by the optimal operational interventions in water distribution systems is explored. The proposed approach is formulated as a multi-objective optimization problem with two objective functions, the number of the operations and the maximum TTHMs concentration that occurs at each node in the network during time, both to minimize. The feasible operational actions concern opening/closing valves and hydrants and turning pumping stations for a fixed time. The AMGA 2 optimizer [2] is used herein for solving the problem, coupled with a module coded in C++, where the implementation of the EPANET Programmers Toolkit functions allows to run the hydraulic and water quality simulations and to calculate the objective functions
- …