41 research outputs found
A criterion for when an emulsion drop undergoing turbulent deformation has reached a critically deformed state
Turbulent breakup in emulsification devices is a dynamic process. Small viscous drops undergo a sequence of oscillations before entering the monotonic deformation phase leading to breakup. The turbulence-interface interactions prior to reaching critical deformation are therefore essential for understanding and modeling breakup. This contribution uses numerical experiments to characterize the critically deformed state (defined as a state from which breakup will follow deterministically, even if no further external stresses would act on the drop). Critical deformation does not coincide with a threshold maximum surface area, as previously suggested. A drop is critically deformed when a neck has formed locally with a curvature such that the Laplace pressure exceeds that of the smallest of the bulbs connected by the neck. This corresponds to a destabilizing internal flow, further thinning the neck. Assuming that the deformation leads to two spherical bulbs linked by a cylindrical neck, the critical deformation is achieved when the neck diameter becomes smaller than the radius of the smallest bulb. The role of emulsifiers is also discussed
A momentum-conserving, consistent, Volume-of-Fluid method for incompressible flow on staggered grids
The computation of flows with large density contrasts is notoriously
difficult. To alleviate the difficulty we consider a consistent mass and
momentum-conserving discretization of the Navier-Stokes equation.
Incompressible flow with capillary forces is modelled and the discretization is
performed on a staggered grid of Marker and Cell type. The Volume-of-Fluid
method is used to track the interface and a Height-Function method is used to
compute surface tension. The advection of the volume fraction is performed
using either the Lagrangian-Explicit / CIAM (Calcul d'Interface Affine par
Morceaux) method or the Weymouth and Yue (WY) Eulerian-Implicit method. The WY
method conserves fluid mass to machine accuracy provided incompressiblity is
satisfied which leads to a method that is both momentum and mass-conserving. To
improve the stability of these methods momentum fluxes are advected in a manner
"consistent" with the volume-fraction fluxes, that is a discontinuity of the
momentum is advected at the same speed as a discontinuity of the density. To
find the density on the staggered cells on which the velocity is centered, an
auxiliary reconstruction of the density is performed. The method is tested for
a droplet without surface tension in uniform flow, for a droplet suddenly
accelerated in a carrying gas at rest at very large density ratio without
viscosity or surface tension, for the Kelvin-Helmholtz instability, for a
falling raindrop and for an atomizing flow in air-water conditions
PArallel, Robust, Interface Simulator (PARIS)
Paris (PArallel, Robust, Interface Simulator) is a finite volume code for
simulations of immiscible multifluid or multiphase flows. It is based on the
"one-fluid" formulation of the Navier-Stokes equations where different fluids
are treated as one material with variable properties, and surface tension is
added as a singular interface force. The fluid equations are solved on a
regular structured staggered grid using an explicit projection method with a
first-order or second-order time integration scheme. The interface separating
the different fluids is tracked by a Front-Tracking (FT) method, where the
interface is represented by connected marker points, or by a Volume-of-Fluid
(VOF) method, where the marker function is advected directly on the fixed grid.
Paris is written in Fortran95/2002 and parallelized using MPI and domain
decomposition. It is based on several earlier FT or VOF codes such as Ftc3D,
Surfer or Gerris. These codes and similar ones, as well as Paris, have been
used to simulate a wide range of multifluid and multiphase flows
Experimental assessment of the fuel heating and the validity of the assumption of adiabatic flow through the internal orifices of a diesel injector
[EN] In this paper an experimental investigation on the heating experienced by the fuel when it expands through the calibrated orifices of a diesel injector is carried out. Five different geometries corresponding
to the control orifices of two different commercial common-rail solenoid injectors were tested. An experimental facility was used to impose a continuous flow through the orifices by controlling the pressures both upstream and downstream of the restriction. Fuel temperature was controlled prior to the orifice inlet and measured after the outlet at a location where the flow is already slowed down. Results were compared to the theoretical temperature increase under the assumption of adiabatic flow (i.e. isenthalpic process). The comparison points out that this assumption allows to predict the fuel temperature change in a reasonable way for four of the five geometries as long as the pressure difference across the orifice is high enough. The deviations for low imposed pressure differences and the remaining orifice are explained due to the low Reynolds numbers (i.e. flow velocities) induced in these cases, which significantly increase the residence time of a fuel particle in the duct, thus enabling heat transfer with the surrounding atmosphere. A dimensionless parameter to quantify the proneness of the flow through an orifice to exchange heat with the surroundings has been theoretically derived and calculated for the different geometries tested, allowing to establish a boundary that defines beforehand the conditions from which heat losses to the ambient can be neglected when dealing with the internal flow along a diesel injector.This work was partly sponsored by “Ministerio de Economía y Competitividad”, of the Spanish government, in the frame of the project “Estudio de la interacción chorro-pared en condiciones realistas de motor”, reference TRA2015-67679-c2-1-R. This support is gratefully acknowledged by the authors.Salvador, F.; Gimeno, J.; Carreres, M.; Crialesi Esposito, M. (2017). Experimental assessment of the fuel heating and the validity of the assumption of adiabatic flow through the internal orifices of a diesel injector. Fuel. 188:442-451. https://doi.org/10.1016/j.fuel.2016.10.061S44245118
Shattered pellet injection experiments at JET in support of the ITER disruption mitigation system design
A series of experiments have been executed at JET to assess the efficacy of the newly installed shattered pellet injection (SPI) system in mitigating the effects of disruptions. Issues, important for the ITER disruption mitigation system, such as thermal load mitigation, avoidance of runaway electron (RE) formation, radiation asymmetries during thermal quench mitigation, electromagnetic load control and RE energy dissipation have been addressed over a large parameter range. The efficiency of the mitigation has been examined for the various SPI injection strategies. The paper summarises the results from these JET SPI experiments and discusses their implications for the ITER disruption mitigation scheme
New H-mode regimes with small ELMs and high thermal confinement in the Joint European Torus
New H-mode regimes with high confinement, low core impurity accumulation, and small edge-localized mode perturbations have been obtained in magnetically confined plasmas at the Joint European Torus tokamak. Such regimes are achieved by means of optimized particle fueling conditions at high input power, current, and magnetic field, which lead to a self-organized state with a strong increase in rotation and ion temperature and a decrease in the edge density. An interplay between core and edge plasma regions leads to reduced turbulence levels and outward impurity convection. These results pave the way to an attractive alternative to the standard plasmas considered for fusion energy generation in a tokamak with a metallic wall environment such as the ones expected in ITER.& nbsp;Published under an exclusive license by AIP Publishing
Overview of JET results for optimising ITER operation
The JET 2019–2020 scientific and technological programme exploited the results of years of concerted scientific and engineering work, including the ITER-like wall (ILW: Be wall and W divertor) installed in 2010, improved diagnostic capabilities now fully available, a major neutral beam injection upgrade providing record power in 2019–2020, and tested the technical and procedural preparation for safe operation with tritium. Research along three complementary axes yielded a wealth of new results. Firstly, the JET plasma programme delivered scenarios suitable for high fusion power and alpha particle (α) physics in the coming D–T campaign (DTE2), with record sustained neutron rates, as well as plasmas for clarifying the impact of isotope mass on plasma core, edge and plasma-wall interactions, and for ITER pre-fusion power operation. The efficacy of the newly installed shattered pellet injector for mitigating disruption forces and runaway electrons was demonstrated. Secondly, research on the consequences of long-term exposure to JET-ILW plasma was completed, with emphasis on wall damage and fuel retention, and with analyses of wall materials and dust particles that will help validate assumptions and codes for design and operation of ITER and DEMO. Thirdly, the nuclear technology programme aiming to deliver maximum technological return from operations in D, T and D–T benefited from the highest D–D neutron yield in years, securing results for validating radiation transport and activation codes, and nuclear data for ITER
The role of ETG modes in JET-ILW pedestals with varying levels of power and fuelling
We present the results of GENE gyrokinetic calculations based on a series of JET-ITER-like-wall (ILW) type I ELMy H-mode discharges operating with similar experimental inputs but at different levels of power and gas fuelling. We show that turbulence due to electron-temperature-gradient (ETGs) modes produces a significant amount of heat flux in four JET-ILW discharges, and, when combined with neoclassical simulations, is able to reproduce the experimental heat flux for the two low gas pulses. The simulations plausibly reproduce the high-gas heat fluxes as well, although power balance analysis is complicated by short ELM cycles. By independently varying the normalised temperature gradients (omega(T)(e)) and normalised density gradients (omega(ne )) around their experimental values, we demonstrate that it is the ratio of these two quantities eta(e) = omega(Te)/omega(ne) that determines the location of the peak in the ETG growth rate and heat flux spectra. The heat flux increases rapidly as eta(e) increases above the experimental point, suggesting that ETGs limit the temperature gradient in these pulses. When quantities are normalised using the minor radius, only increases in omega(Te) produce appreciable increases in the ETG growth rates, as well as the largest increases in turbulent heat flux which follow scalings similar to that of critical balance theory. However, when the heat flux is normalised to the electron gyro-Bohm heat flux using the temperature gradient scale length L-Te, it follows a linear trend in correspondence with previous work by different authors
Spectroscopic camera analysis of the roles of molecularly assisted reaction chains during detachment in JET L-mode plasmas
The roles of the molecularly assisted ionization (MAI), recombination (MAR) and dissociation (MAD) reaction chains with respect to the purely atomic ionization and recombination processes were studied experimentally during detachment in low-confinement mode (L-mode) plasmas in JET with the help of experimentally inferred divertor plasma and neutral conditions, extracted previously from filtered camera observations of deuterium Balmer emission, and the reaction coefficients provided by the ADAS, AMJUEL and H2VIBR atomic and molecular databases. The direct contribution of MAI and MAR in the outer divertor particle balance was found to be inferior to the electron-atom ionization (EAI) and electron-ion recombination (EIR). Near the outer strike point, a strong atom source due to the D+2-driven MAD was, however, observed to correlate with the onset of detachment at outer strike point temperatures of Te,osp = 0.9-2.0 eV via increased plasma-neutral interactions before the increasing dominance of EIR at Te,osp < 0.9 eV, followed by increasing degree of detachment. The analysis was supported by predictions from EDGE2D-EIRENE simulations which were in qualitative agreement with the experimental observations
Testing a prediction model for the H-mode density pedestal against JET-ILW pedestals
The neutral ionisation model proposed by Groebner et al (2002 Phys. Plasmas 9 2134) to determine the plasma density profile in the H-mode pedestal, is extended to include charge exchange processes in the pedestal stimulated by the ideas of Mahdavi et al (2003 Phys. Plasmas 10 3984). The model is then tested against JET H-mode pedestal data, both in a 'standalone' version using experimental temperature profiles and also by incorporating it in the Europed version of EPED. The model is able to predict the density pedestal over a wide range of conditions with good accuracy. It is also able to predict the experimentally observed isotope effect on the density pedestal that eludes simpler neutral ionization models