Groundwater reinjection and heat dissipation: lessons from the operation of a large groundwater cooling system in Central London

The performance of a large open-loop groundwater cooling scheme in a shallow alluvial aquifer at a prominent public building in Central London has been monitored closely over its first 2 years of operation. The installed system provided cooling to the site continuously for a period of 9 months between June 2012 and April 2013. During this period, c. 131300 m3 of groundwater was abstracted from a single pumping well and recharged into a single injection borehole. The amount of heat rejected in this period amounts to c. 1.37 GWh. A programme of hydraulic testing was subsequently undertaken over a 3 month period between July and October 2013 to evaluate the performance of the injection borehole. The data indicate no significant change in injection performance between commissioning trials undertaken in 2010 and the most recent period of testing, as evidenced by comparison of injection pressures for given flow rates in 2010 and 2013. Continuous temperature monitoring of the abstracted water, the discharge and a number of observation wells demonstrates the evolution of a heat plume in the aquifer in response to heat rejection and subsequent dissipation of this heat during the 18 month planned cessation

24R,25-Dihydroxyvitamin D3 Protects against Articular Cartilage Damage following Anterior Cruciate Ligament Transection in Male Rats

Osteoarthritis (OA) in humans is associated with low circulating 25-hydroxyvitamin D3 [25 (OH)D3]. In vitamin D replete rats, radiolabeled 24R,25-dihydroxyvitamin D3 [24R,25 (OH)2D3] accumulates in articular cartilage following injection of [3 H]-25(OH)D3. Previously, we showed that 24R,25(OH)2D3 blocks chondrocyte apoptosis via phospholipase D and p53, suggesting a role for 24R,25(OH)2D3 in maintaining cartilage health. We examined the ability of 24R,25(OH)2D3 to prevent degenerative changes in articular cartilage in an OAlike environment and the potential mechanisms involved. In vitro, rat articular chondrocytes were treated with IL-1β with and without 24R,25(OH)2D3 or 1α,25(OH)2D3. 24R,25(OH)2D3 but not 1α,25(OH)2D3 blocked the effects of IL-1β in a dose-dependent manner, and its effect was partially mediated through the TGF-β1 signaling pathway. In vivo, unilateral anterior cruciate ligament transections were performed in immunocompetent rats followed by intra-articular injections of 24R,25(OH)2D3 or vehicle (t = 0, 7, 14, 21 days). Tissues were harvested on day 28. Joints treated with vehicle had changes typical of OA whereas joints treated with 24R,25(OH)2D3 had less articular cartilage damage and levels of inflammatory mediators. These results indicate that 24R,25(OH)2D3 protects against OA, and suggest that it may be a therapeutic approach for preventing trauma-induced osteoarthritis

ComeHere: Exploiting ethereum for secure sharing of health-care data

The problem of protecting sensitive data like medical records, and enabling the access only to authorized entities is currently a challenge. Current solutions often require trusting some centralized entity which is in charge of managing the data. The disruptive technology of blockchains may offer the possibility to change the current scenario and give to the users the control on their personal data. In this paper we propose ComeHere, a system able to store medical records and to exploit the blockchain technology to control and track the access right transfer on the blockchain. The paper shows the current status of the project, presents a preliminary proof-of-concept implementation and discusses the future improvements of the system, and some critical issues which are still open.Engineering and Physical Sciences Research Council (EPSRC)BioBeats Group Lt

Comparing peak and submaximal cardiorespiratory responses during field walking tests with incremental cycle ergometry in COPD

Background and objective: Field and laboratory-based tests are used to measure exercise capacity in people with COPD. A comparison of the cardiorespiratory responses to field tests, referenced to a laboratory test, is needed to appreciate the relative physiological demands. We sought to compare peak and submaximal cardiorespiratory responses to the 6-min walk test, incremental shuttle walk test and endurance shuttle walk test with a ramp cycle ergometer test (CET) in patients with COPD. Methods: Twenty-four participants (FEV1 50 ± 14%; 66.5 ± 7.7 years; 15 men) completed four sessions, separated by ≥24 h. During an individual session, participants completed either two 6-min walk tests, incremental shuttle walk tests, endurance shuttle walk tests using standardized protocols, or a single CET, wearing a portable gas analysis unit (Cosmed K4b2) which included measures of heart rate and arterial oxygen saturation (SpO2). Results: Between tests, no difference was observed in the peak rate of oxygen uptake (F3,69 = 1.2; P = 0.31), end-test heart rate (F2,50 = 0.6; P = 0.58) or tidal volume (F3,69 = 1.5; P = 0.21). Compared with all walking tests, the CET elicited a higher peak rate of carbon dioxide output (1173 ± 350 mL/min; F3,62 = 4.8; P = 0.006), minute ventilation (48 ± 17 L/min; F3,69 = 10.2; P < 0.001) and a higher end-test SpO2 (95 ± 4%; F3,63 = 24.9; P < 0.001). Conclusions: In patients with moderate COPD, field walking tests elicited a similar peak rate of oxygen uptake and heart rate as a CET, demonstrating that both self- and externally paced walking tests progress to high intensities

Combining high conductivity with complete optical transparency: A band-structure approach

A comparison of the structural, optical and electronic properties of the recently discovered transparent conducting oxide (TCO), nanoporous Ca12Al14O33, with those of the conventional TCO's (such as Sc-doped CdO) indicates that this material belongs conceptually to a new class of transparent conductors. For this class of materials, we formulate criteria for the successful combination of high electrical conductivity with complete transparency in the visible range. Our analysis suggests that this set of requirements can be met for a group of novel materials called electrides.Comment: 3 pages, 3 figures, submitted for publicatio

Studies of Band Structure and Free Carrier Scattering in Transparent Conducting Oxides Based on Combined Measurements of Electron Transport Phenomena

Experimental methods are discussed for studying band structure, effective mass, and other electronic properties relevant to mobility, including scattering mechanisms, relaxation time, and the influence of grain boundaries (GBs) in polycrystalline transparent conducting oxide (TCO) films. Impedance spectroscopy permits evaluation of the GB potential barrier height and density-of-states. These studies enable an estimate of the limiting mobility achievable for practical transparent conducting oxides to be made. The equipment for measurement of the four transport coefficients is discussed, and examples of its application to films of ZnO, SnO2, and Cd2SnO4 are given

Weak lensing surveys and the intrinsic correlation of galaxy ellipticities

We explore the possibility that an intrinsic correlation between galaxy ellipticities arising during the galaxy formation process may account for part of the shear signal recently reported by several groups engaged in weak lensing surveys. Using high resolution N-body simulations we measure the projected ellipticities of dark matter halos and their correlations as a function of pair separation. With this simplifying, but not necessarily realistic assumption (halo shapes as a proxy for galaxy shapes), we find a positive detection of correlations up to scales of at least 20 h^-1mpc (limited by the box size). The signal is not strongly affected by variations in the halo finding technique, or by the resolution of the simulations. We translate our 3d results into angular measurements of ellipticity correlation functions and shear variance which can be directly compared to observations. We also measure similar results from simulated angular surveys made by projecting our simulation boxes onto the plane of the sky and applying a radial selection function. Interestingly, the shear variance we measure is a small, but not entirely negligible fraction (from ~10-20 %) of that seen by the observational groups, and the ellipticity correlation functions approximately mimic the functional form expected to be caused by weak lensing. The amplitude depends on the width in redshift of the galaxy distribution. If photometric redshifts are used to pick out a screen of background galaxies with a small width, then the intrinsic correlation may become comparable to the weak lensing signal. Although we are dealing with simulated dark matter halos, whether there is a signal from real galaxies could be checked with a nearby sample with known redshifts.Comment: 12 pages, 11 ps figures, emulateapj.sty, submitted to Ap

Evaluation of microporous carbon filters as catalysts for ozone decomposition

Ozone is produced in small quantities in photocopiers and laser printers in the workplace and large quantities in industrial waste water treatment facilities. Carbon filters are commonly used to decompose this unwanted ozone. The three most important factors in producing a filter for this purpose are flow properties, efficiency, and cost. Most ozone decomposition applications require very low back-pressure at modest flow rates. The tradeoff between the number of pores and the size of the pores will be discussed. Typical unfiltered emissions in the workplace are approximately 1 ppm. The maximum permissible exposure limit, PEL, for worker exposure to ozone is 0.1 ppm over 8 hours. Several methods have been examined to increase the efficiency of ozone decomposition. Carbon surfaces were modified with catalysts, the surface activated, and the surface area was increased, in attempts to decompose ozone more effectively. Methods to reduce both the processing and raw material costs were investigated. Several sources of microporous carbon were investigated as ozone decomposition catalysts. Cheaper processing routes including macropore templating, faster drying and extracting methods were also studied

A systematic review investigating fatigue, psychological and cognitive impairment following TIA and minor stroke:protocol paper

Approximately 20,000 people have a transient ischemic attack (TIA) and 23,375 have a minor stroke in England each year. Fatigue, psychological and cognitive impairments are well documented post-stroke. Evidence suggests that TIA and minor stroke patients also experience these impairments; however, they are not routinely offered relevant treatment. This systematic review aims to: (1) establish the prevalence of fatigue, anxiety, depression, post-traumatic stress disorder (PTSD) and cognitive impairment following TIA and minor stroke and to investigate the temporal course of these impairments; (2) explore impact on quality of life (QoL), change in emotions and return to work; (3) identify where further research is required and to potentially inform an intervention study

Size and dimensionality effects in superconducting Mo thin films

Molybdenum is a low Tc, type I superconductor whose fundamental properties are poorly known. Its importance as an essential constituent of new high performance radiation detectors, the so-called transition edge sensors (TESs) calls for better characterization of this superconductor, especially in thin film form. Here we report on a study of the basic superconducting features of Mo thin films as a function of their thickness. The resistivity is found to rise and the critical temperature decreases on decreasing film thickness, as expected. More relevant, the critical fields along and perpendicular to the film plane are markedly different, thickness dependent and much larger than the thermodynamic critical field of Mo bulk. These results are consistent with a picture of type II 2D superconducting films, and allow estimates of the fundamental superconducting lengths of Mo. The role of morphology in determining the 2D and type II character of the otherwise type I molybdenum is discussed. The possible consequences of this behaviour on the performance of radiation detectors are also addresse