Combined numerical and experimental investigation of the micro-hydrodynamics of chevron-based textured patterns influencing conjunctional friction of sliding contacts

Reciprocating and low-speed sliding contacts can experience increased friction because of solid boundary interactions. Use of surface texturing has been shown to mitigate undue boundary friction and improve energy efficiency. A combined numerical and experimental investigation is presented to ascertain the beneficial effect of pressure perturbation caused by micro-hydrodynamics of entrapped reservoirs of lubricant in cavities of textured forms as well as improved micro-wedge flow. The results show good agreement between numerical predictions and experimental measurements using a precision sliding rig with a floating bed-plate. Results show that the texture pattern and distribution can be optimised for given conditions, dependent on the intended application under laboratory conditions. The translation of the same into practical in-field applications must be carried out in conjunction with the cost of fabrication and perceived economic gain. This means that near optimal conditions may suffice for most application areas and in practice lesser benefits may accrue than that obtained under ideal laboratory conditions

Women in the Refrigeration Industry

The refrigeration industry plays a major and increasing role in today’s global economy, with significant contributions made in food, health, energy and environmental domains which policy makers need to better understand and take into account. The need for engineering and technical staff is currently increasing due to the growing demand for refrigerating capacities, along with the unique skills required from refrigeration-related professions in the field of energy and environment. Women are still significantly and visibly under-represented in the refrigeration industry. The purpose of this paper is to demonstrate the current preliminary state-of-the-art of women in the refrigeration field collected from national refrigeration institutions and associations. Suggested incentive actions are the outcomes of the second meeting of the official IIR Women in Refrigeration sub-group

miRNA profiles as a predictor of chemoresponsiveness in Wilms' tumor blastema.

The current SIOP treatment protocol for Wilms' tumor involves pre-operative chemotherapy followed by nephrectomy. Not all patients benefit equally from such chemotherapy. The aim of this study was to generate a miRNA profile of chemo resistant blastemal cells in high risk Wilms' tumors which might serve as predictive markers of therapeutic response at the pre-treatment biopsy stage. We have shown here that unsupervised hierarchical clustering of genome-wide miRNA expression profiles can clearly separate intermediate risk tumors from high risk tumors. A total of 29 miRNAs were significantly differentially expressed between post-treatment intermediate risk and high risk groups, including miRNAs that have been previously linked to chemo resistance in other cancer types. Furthermore, 7 of these 29 miRNAs were already at the pre-treatment biopsy stage differentially expressed between cases ultimately deemed intermediate risk compared to high risk. These miRNA alterations include down-regulation in high risk cases of miR-193a.5p, miR-27a and the up-regulation of miR-483.5p, miR-628.5p, miR-590.5p, miR-302a and miR-367. The demonstration of such miRNA markers at the pre-treatment biopsy stage could permit stratification of patients to more tailored treatment regimens

Diphasic non-local model for granular surface flows

Considering recent results revealing the existence of multi-scale rigid clusters of grains embedded in granular surface flows, i.e. flows down an erodible bed, we describe here the surface flows rheology through a non-local constitutive law. The predictions of the resulting model are compared quantitatively to experimental results: The model succeeds to account for the counter-intuitive shape of the velocity profile observed in experiments, i.e. a velocity profile decreasing exponentially with depth in the static phase and remaining linear in the flowing layer with a velocity gradient independent of both the flowing layer thickness, the angle between the flow and the horizontal, and the coefficient of restitution of the grains. Moreover, the scalings observed in rotating drums are recovered, at least for small rotating speed.Comment: 7 pages, submitted to Europhys. Let

Logarithmic rate dependence in deforming granular materials

Rate-independence for stresses within a granular material is a basic tenet of many models for slow dense granular flows. By contrast, logarithmic rate dependence of stresses is found in solid-on-solid friction, in geological settings, and elsewhere. In this work, we show that logarithmic rate-dependence occurs in granular materials for plastic (irreversible) deformations that occur during shearing but not for elastic (reversible) deformations, such as those that occur under moderate repetitive compression. Increasing the shearing rate, \Omega, leads to an increase in the stress and the stress fluctuations that at least qualitatively resemble what occurs due to an increase in the density. Increases in \Omega also lead to qualitative changes in the distributions of stress build-up and relaxation events. If shearing is stopped at t=0, stress relaxations occur with \sigma(t)/ \sigma(t=0) \simeq A \log(t/t_0). This collective relaxation of the stress network over logarithmically long times provides a mechanism for rate-dependent strengthening.Comment: 4 pages, 5 figures. RevTeX

Finite-time fluctuations in the degree statistics of growing networks

This paper presents a comprehensive analysis of the degree statistics in models for growing networks where new nodes enter one at a time and attach to one earlier node according to a stochastic rule. The models with uniform attachment, linear attachment (the Barab\'asi-Albert model), and generalized preferential attachment with initial attractiveness are successively considered. The main emphasis is on finite-size (i.e., finite-time) effects, which are shown to exhibit different behaviors in three regimes of the size-degree plane: stationary, finite-size scaling, large deviations.Comment: 33 pages, 7 figures, 1 tabl

Dissipation of vibration in rough contact

The relationship which links the normal vibration occurring during the sliding of rough surfaces and the nominal contact area is investigated. Two regimes are found. In the first one, the vibrational level does not depend on the contact area, while in the second one, it is propor- tional to the contact area. A theoretical model is proposed. It is based on the assumption that the vibrational level results from a competition between two processes of vibration damping, the internal damping of the material and the contact damping occurring at the interface

A model and prototype implementation for tracking and tracing agricultural batch products along the food chain

There is an increasing demand of traceability in the food chain, statutory requirements are growing stricter and there is increasing pressure to develop standardized traceability systems. Each event in the chain, like production of transportation, packing, distribution or processing results in a different product which can have its own information associated within the tracing system. From the raw material to the sale of goods, more and more information needs to be gathered and made available. Supplementary information may also be collected at any step, in order to provide data for analysis and optimization of production practices. Using web-based systems for data processing, storage and transfer makes possible a flexible way of information access, networking and usability. In this paper an architectural proposal is presented and the proposed solution is tested by the implementation of a prototype. The software architecture presented makes use of a series of standards than offer new possibilities in traceability control and management. For testing the prototype, information from precision farming together with the information recorded during the transport and delivery was used. The system enables full traceability and it complies with all existing traceability standards

A model for collisions in granular gases

We propose a model for collisions between particles of a granular material and calculate the restitution coefficients for the normal and tangential motion as functions of the impact velocity from considerations of dissipative viscoelastic collisions. Existing models of impact with dissipation as well as the classical Hertz impact theory are included in the present model as special cases. We find that the type of collision (smooth, reflecting or sticky) is determined by the impact velocity and by the surface properties of the colliding grains. We observe a rather nontrivial dependence of the tangential restitution coefficient on the impact velocity.Comment: 11 pages, 2 figure

Static Friction Phenomena in Granular Materials: Coulomb Law vs. Particle Geometry

The static as well as the dynamic behaviour of granular material are determined by dynamic {\it and} static friction. There are well known methods to include static friction in molecular dynamics simulations using scarcely understood forces. We propose an Ansatz based on the geometrical shape of nonspherical particles which does not involve an explicit expression for static friction. It is shown that the simulations based on this model are close to experimental results.Comment: 11 pages, Revtex, HLRZ-33/9