Slippage of water past superhydrophobic carbon nanotube forests in microchannels

We present in this letter an experimental characterization of liquid flow slippage over superhydrophobic surfaces made of carbon nanotube forests, incorporated in microchannels. We make use of a micro-PIV (Particule Image Velocimetry) technique to achieve the submicrometric resolution on the flow profile necessary for accurate measurement of the surface hydrodynamic properties. We demonstrate boundary slippage on the Cassie superhydrophobic state, associated with slip lengths of a few microns, while a vanishing slip length is found in the Wenzel state, when the liquid impregnates the surface. Varying the lateral roughness scale L of our carbon nanotube forest-based superhydrophobic surfaces, we demonstrate that the slip length varies linearly with L in line with theoretical predictions for slippage on patterned surfaces.Comment: under revie

Effect of Patterned Slip on Micro and Nanofluidic Flows

We consider the flow of a Newtonian fluid in a nano or microchannel with walls that have patterned variations in slip length. We formulate a set of equations to describe the effects on an incompressible Newtonian flow of small variations in slip, and solve these equations for slow flows. We test these equations using molecular dynamics simulations of flow between two walls which have patterned variations in wettability. Good qualitative agreement and a reasonable degree of quantitative agreement is found between the theory and the molecular dynamics simulations. The results of both analyses show that patterned wettability can be used to induce complex variations in flow. Finally we discuss the implications of our results for the design of microfluidic mixers using slip.Comment: 13 pages, 12 figures, final version for publicatio

Colloidal motility and pattern formation under rectified diffusiophoresis

In this letter, we characterize experimentally the diffusiophoretic motion of colloids and lambda- DNA toward higher concentration of solutes, using microfluidic technology to build spatially- and temporally-controlled concentration gradients. We then demonstrate that segregation and spatial patterning of the particles can be achieved from temporal variations of the solute concentration profile. This segregation takes the form of a strong trapping potential, stemming from an osmotically induced rectification mechanism of the solute time-dependent variations. Depending on the spatial and temporal symmetry of the solute signal, localization patterns with various shapes can be achieved. These results highlight the role of solute contrasts in out-of-equilibrium processes occuring in soft matter

Scaling laws for slippage on superhydrophobic fractal surfaces

We study the slippage on hierarchical fractal superhydrophobic surfaces, and find an unexpected rich behavior for hydrodynamic friction on these surfaces. We develop a scaling law approach for the effective slip length, which is validated by numerical resolution of the hydrodynamic equations. Our results demonstrate that slippage does strongly depend on the fractal dimension, and is found to be always smaller on fractal surfaces as compared to surfaces with regular patterns. This shows that in contrast to naive expectations, the value of effective contact angle is not sufficient to infer the amount of slippage on a fractal surface: depending on the underlying geometry of the roughness, strongly superhydrophobic surfaces may in some cases be fully inefficient in terms of drag reduction. Finally, our scaling analysis can be directly extended to the study of heat transfer at fractal surfaces, in order to estimate the Kapitsa surface resistance on patterned surfaces, as well as to the question of trapping of diffusing particles by patchy hierarchical surfaces, in the context of chemoreception

Dynamics of simple liquids at heterogeneous surfaces : Molecular Dynamics simulations and hydrodynamic description

In this paper we consider the effect of surface heterogeneity on the slippage of fluid, using two complementary approaches. First, MD simulations of a corrugated hydrophobic surface have been performed. A dewetting transition, leading to a super-hydrophobic state, is observed for pressure below a ``capillary'' pressure. Conversely a very large slippage of the fluid on this composite interface is found in this superhydrophobic state. Second, we propose a macroscopic estimate of the effective slip length on the basis of continuum hydrodynamics, in order to rationalize the previous MD results. This calculation allows to estimate the effect of a heterogeneous slip length pattern on the composite interface. Comparison between the two approaches are in good agreement at low pressure, but highlights the role of the exact shape of the liquid-vapor interface at higher pressure. These results confirm that small variations in the roughness of a surface can lead to huge differences in the slip effect. On the basis of these results, we propose some guidelines to design highly slippery surfaces, motivated by potential applications in microfluidics.Comment: submitted to EPJ

Dynamic clustering in active colloidal suspensions with chemical signaling

In this paper, we explore experimentally the phase behavior of a dense active suspension of self- propelled colloids. In addition to a solid-like and a gas-like phase observed for high and low densities, a novel cluster phase is reported at intermediate densities. This takes the form of a stationary assembly of dense aggregates, with an average size which grows with activity as a linear function of the self-propelling velocity. While different possible scenarii can be considered to account for these observations - such as a generic velocity weakening instability recently put forward -, we show that the experimental results are reproduced by a chemotactic aggregation mechanism, originally introduced to account for bacterial aggregation, and accounting here for diffusiophoretic chemical interaction between colloidal swimmers.Comment: supplementary video :http:// www-lpmcn.univ-lyon1.fr/~lbocquet/Movie-Theurkauff-SI.av

Nanorheology : an Investigation of the Boundary Condition at Hydrophobic and Hydrophilic Interfaces

t has been shown that the flow of a simple liquid over a solid surface can violate the so-called no-slip boundary condition. We investigate the flow of polar liquids, water and glycerol, on a hydrophilic Pyrex surface and a hydrophobic surface made of a Self-Assembled Monolayer of OTS (octadecyltrichlorosilane) on Pyrex. We use a Dynamic Surface Force Apparatus (DSFA) which allows one to study the flow of a liquid film confined between two surfaces with a nanometer resolution. No-slip boundary conditions are found for both fluids on hydrophilic surfaces only. Significant slip is found on the hydrophobic surfaces, with a typical length of one hundred nanometers.Comment: 8 pages, 7 figures, 2 tables. Accepted for European Physical Journal E - Sofr Mate

Slip flow over structured surfaces with entrapped microbubbles

On hydrophobic surfaces, roughness may lead to a transition to a superhydrophobic state, where gas bubbles at the surface can have a strong impact on a detected slip. We present two-phase lattice Boltzmann simulations of a Couette flow over structured surfaces with attached gas bubbles. Even though the bubbles add slippery surfaces to the channel, they can cause negative slip to appear due to the increased roughness. The simulation method used allows the bubbles to deform due to viscous stresses. We find a decrease of the detected slip with increasing shear rate which is in contrast to some recent experimental results implicating that bubble deformation cannot account for these experiments. Possible applications of bubble surfaces in microfluidic devices are discussed.Comment: 4 pages, 4 figures. v2: revised version, to appear in Phys. Rev. Let

Evidence of slippage breakdown for a superhydrophobic microchannel

© 2014 AIP Publishing LLC.A full characterization of the water flow past a silicon superhydrophobic surface with longitudinal micro-grooves enclosed in a microfluidic device is presented. Fluorescence microscopy images of the flow seeded with fluorescent passive tracers were digitally processed to measure both the velocity field and the position and shape of the liquid-air interfaces at the superhydrophobic surface. The simultaneous access to the meniscus and velocity profiles allows us to put under a strict test the no-shear boundary condition at the liquid-air interface. Surprisingly, our measurements show that air pockets in the surface cavities can sustain non-zero interfacial shear stresses, thereby hampering the friction reduction capabilities of the surface. The effects of the meniscus position and shape as well as of the liquid-air interfacial friction on the surface performances are separately assessed and quantified

Hydrodynamic slip boundary condition at chemically patterned surfaces: A continuum deduction from molecular dynamics

We investigate the slip boundary condition for single-phase flow past a chemically patterned surface. Molecular dynamics (MD) simulations show that modulation of fluid-solid interaction along a chemically patterned surface induces a lateral structure in the fluid molecular organization near the surface. Consequently, various forces and stresses in the fluid vary along the patterned surface. Given the presence of these lateral variations, a general scheme is developed to extract hydrodynamic information from MD data. With the help of this scheme, the validity of the Navier slip boundary condition is verified for the chemically patterned surface, where a local slip length can be defined. Based on the MD results, a continuum hydrodynamic model is formulated using the Navier-Stokes equation and the Navier boundary condition, with a slip length varying along the patterned surface. Steady-state velocity fields from continuum calculations are in quantitative agreement with those from MD simulations. It is shown that, when the pattern period is sufficiently small, the solid surface appears to be homogeneous, with an effective slip length that can be controlled by surface patterning. Such a tunable slip length may have important applications in nanofluidics.Comment: 41 pages, 17 figure