Out-of-plane seismic response of stone masonry walls: experimental and analytical study of real piers

This paper presents the application of an existing simplified displacement-based procedure to the characterization of the nonlinear force-displacement relationship for the out-of-plane behaviour of unreinforced traditional masonry walls. According to this procedure, tri-linear models based on three different energy based criteria were constructed and confronted with three experimental tests on existing stone masonry constructions. Moreover, a brief introduction is presented regarding the main characteristics of the in situ cyclic testing recently carried out using distributed loads, as well as results obtained during the experimental campaigns performed. The comparison between the experimental and the analytical results are presented and discussed

Numerical model to account for the influence of infill masonry on the RC structures behaviour

It is a common misconception considers that masonry infill walls in structural RC buildings can only increase the overall lateral load capacity, and, therefore, must always be considered beneficial to seismic performance. Recent earthquakes have showed numerous examples of severe damages or collapses of buildings caused by structural response modification induced by the non-structural masonry partitions. From a state-of-the-art review of the available numerical models for the representation of the infill masonry behaviour in structural response, it was proposed an upgraded model. The proposed model is inspired on the equivalent bi-diagonal compression strut model, and considers the non-linear behaviour of the infill masonry subjected to cyclic loads. The model was implemented and calibrated in a non-linear dynamic computer code, VISUALANL. In this paper, it is presented the proposed model and the results of the calibration analyses are briefly introduced and discussed

Structural optimisation problem in support to building retrofitting decision

Various analysis methods, either linear elastic or non-linear, static or dynamic, are available for the performance analysis of existing buildings. Despite its advantages, it must be admitted that non-linear time history analysis can frequently become overly complex and impractical for general use as a first assessment. Simplified models, as the Capacity Spectrum Method, are frequently not able to accurately assess irregular structures. Considering these limitations, it is proposed and evaluated a simplified MDOF non-linear dynamic model, accounting for non-linear storey behaviour and storey damping. Based on the MDOF non-linear dynamic model, were developed optimization algorithms for the redesign of existing non-seismically designed structures. The optimization procedure searches for the optimum storey strengthening distribution (strength, stiffness or damping) in order to meet specific performance requirements, in terms of maximum inter-storey drift for a given seismic demand level. Numerical examples are presented in order to illustrate the capability of methodology

Out-of-plane in situ cyclic testing of unreinforced stone masonry walls with distributed loads

The present paper reports an in situ experimental test campaign carried out on existing buildings, in order to investigate the seismic behaviour of traditional masonry walls subject to out-of-plane loads. For the testing proposes, an experimental test setup based on a selfequilibrated scheme was developed and optimized to be applied in situ in two specimens on original and strengthened conditions. The obtained results are presented and carefully discussed namely from the reinforcement solutions’ efficiency point-of-view, as well as compared to previous experimental data obtained for the same type of masonry walls. Additionally, a simplified linearized displacement-based procedure was adapted in order to characterize the nonlinear force-displacement relationship for unreinforced traditional masonry walls and to analytically predict the experimental test results. The confrontation between the experimental and the analytical results are presented and discussed

Energy dissipation and equivalent damping of RC columns subjected to biaxial bending: an investigation based in experimental results

The cyclic behaviour of reinforced concrete columns have been object of many experimental studies in the recent past years. However, the experimental studies on the biaxial response of RC columns are still limited. In this paper are presented the main results of an experimental study of 24 full-scale rectangular building columns tested for different loading paths under uniaxial and biaxial conditions. The experimental results are presented and discussed in terms of global behaviour, particularly focusing on the stiffness and strength degradation due to the increasing cyclic demand, and energy dissipation evolution. The equivalent viscous damping was estimated based on the experimental results of the RC columns tested under biaxial loading and empirical expressions are proposed

Seismic vulnerability of Modern Architecture building's: Le Corbusier style: a case study

In Portugal, at the end of the World War II, a new generation of architects emerged, influenced by the Modern Movement Architecture, born in Central-Europe in the early twenties but now influenced also by the Modern Brazilian Architecture. They worked with new typologies, such as multifamily high-rise buildings, and built them in the most important cities of the country, during the fifties, reflecting the principles of the Modernity and with a strong formal conception inspired in the International Style’s codes. Concrete, as material and technology, allowed that those “Unity Centre” buildings become modern objects, expressing the five-point formula that Le Corbusier enounced in 1927 and draw at the “Unité d’Habitation de Marseille”, namely: the building lifted in pilotis, the free design of the plan, the free design of the façade, the unbroken horizontal window and the roof terrace. In Lisbon, late forties urban plans transformed and expanded the city, creating modulated buildings repeated in great extensions – that was a progressist idea of standardization. The Infante Santo complex is a successful adaptation to the Lisbon reality of the Modern Urbanism and Architecture. In the fifties, it was built a large number of Modern housing buildings in Lisbon, with structural characteristics that, in certain conditions, can induce weaknesses in structural behaviour, especially under earthquake loading. For example, the concept of buildings lifted in pilotis can strongly facilitate the occurrence of soft-storey mechanisms, which turns these structures very vulnerable to earthquake actions. The development and calibration of refined numerical tools, as well as, assessment and design codes makes feasible the structural safety assessment of existing buildings. To investigate the vulnerability of this type of construction, one building representative of the Modern Architecture, at the Infante Santo Avenue, was studied. This building was studied with the non-linear dynamic analysis program PORANL, which allows the safety evaluation according to the recently proposed standards

Simplified model for the non-linear behaviour representation of reinforced concrete columns under biaxial bending

In the present paper a simplified model is proposed for the force-deformation behaviour of reinforced concrete members under biaxial loading combined with axial force. The starting point for the model development was an existing fixed-length plastic hinge element model that accounts for the non-linear hysteretic behaviour at the element end-sections, characterized by trilinear moment-curvature laws. To take into account the section biaxial behaviour, the existing model was adopted for both orthogonal lateral directions and an interaction function was introduced to couple the hysteretic response of both directions. To calibrate the interaction function it were used numerical results, obtained from fibre models, and experimental results. For the parameters identification, non-linear optimization approaches were adopted, namely: the gradient based methods followed by the genetic, evolutionary and nature-inspired algorithms. Finally, the simplified non-linear model proposed is validated through the analytical simulation of biaxial test results carried out in full-scale reinforced concrete columns

Experimental response of RC columns built with plain bars under unidirectional cyclic loading

A large number of existing reinforced concrete (RC) buildings structures were designed and built before mid-70’s, when the reinforcing bars had plain surface and prior to the enforcement of the modern seismic-oriented design philosophies. This paper describes a series of unidirectional cyclic tests performed on seven full-scale columns built with plain reinforcing bars, without adequate reinforcement detailing for seismic demands. The specimens have different reinforcing steel details and different cross sections. A further monotonic test was also carried out for one of the specimens and an additional column, built with deformed bars, was cyclically tested for comparison with the results for the specimens with plain bars. The main experimental results are presented and discussed. The influence of bond properties on the column behaviour is evidenced by differences observed between the cyclic response of similar specimens with plain and deformed bars. The influence of reinforcement amount and displacement history on the column response is also investigated

Structural vulnerability of Nepalese Pagoda temples

Nepal is located in one of the most severe earthquake prone areas of the world, lying between collisions of Indian to the Eurasian plate, moving continuously, resulting in frequent devastating earthquakes within this region. Moreover, different authors refer mention that the accumulated slip deficit (central seismic gap) is likely to produce large earthquakes in the future. Also, the analysis of the available information of previous earthquakes indicates the potential damage that can occurs in unreinforced traditional masonry structures in future earthquakes. Most of the Nepalese pagoda temples were erected following very simple rules and construction details to accomplish with seismic resistance requirement, or even without any consideration for seismic resistance, during the period of Malla dynasty (1200-1768). Presently, conservation and restoration of ancient monuments are one of the major concerns in order to preserve our built heritage, transferring it to the future generations. The present paper is devoted to outline particular structural fragility characteristics in the historic Nepalese pagoda temples which affect their seismic performance. Moreover, based on the parametric analysis identified structural weaknesses/fragilities of pagoda topology, the associated traditional building technology and constructional details

A comparison of methods to evaluate energy expenditure of incubating wandering albatrosses

Measurements of incubation energetics can vary depending on the method used to measure metabolism of an incubating bird. Therefore, we evaluated the energy expenditure of six male and four female wandering albatrosses (Diomedea exulans Linnaeus) using doubly labeled water (DLW), the rate of mass loss, and estimates of metabolic water production derived from water influx rate (WIR). Incubation metabolic rates (IMR) determined with DLW ( 169 ± 21 kJ kg d SD) were significantly lower than estimates derived from mass loss ( 277 ± 46kJ kg d SD) and WIR ( males=289 ± 60 kJ kg d vs. females = 400 ± 69 kJ kg d SD). Estimates of IMR from f WIR were similar to IMR (305 ± 39 kJ kg d SD) determined by respirometry in a previous study, and IMR from DLW was similar to estimates based on heart rate (HR; 147 ± 26 kJ d SD) determined in another study. Ap- 147 26 plying the different measurements of IMR to construct an en-ergy budget, we estimate that a breeding pair of wandering albatrosses spends 124--234 MJ to incubate the egg for 78 d. Finally, IMRs determined with DLW and HR were similar